Search
35 articles for “Aluminum alloy”
-
Role and Application of Aluminum Alloys
Abstract: Alloy wheels are wheels that are made from an alloy of aluminum or magnesium. Alloys are mixtures of metal and other elements. They generally provide greater strength over pure metals, which are usually much softer and more ductile. Aircraft manufacturers use high-strength alloys (principally alloy 7075) to strengthen aluminum aircraft structures. Aluminum alloy 7075 has Copper (1.6 %), Magnesium (2.5 %) and zinc (5.6 %) added for ultimate strength, but …
Published in International Journal of Metallurgy and Alloys · Vol. 3, Issue 2, 2017 · pp. 17–24 Read article
-
Eco-Friendly Corrosion Inhibition of Aluminum Alloys with Acacia nilotica in Acidic Media
Abstract: Gravimetric analysis was used to examine the corrosion inhibitory effects of Acacia nilotica extract in 0.5 N H2SO4 on aluminum alloy at different concentrations and at 303 K. At a corrosion inhibitor concentration 0.45% at 303 K, the inhibition efficiency is found to be remarkably high (52.25%). Results show that the extract's capacity to inhibit was caused by its adsorption onto the metal surface via the Langmuir adsorption process. For …
Published in International Journal of Metallurgy and Alloys · Vol. 10, Issue 1, 2024 · pp. 31–37 Read article
-
Aluminum Alloy as Sacrificial Anode for Corrosion Protection: A Review
Abstract: Aluminum sacrificial anodes are widely used for cathodic protection in marine, offshore, and energy applications due to their light weight, high current efficiency, and favorable electrochemical potential. Pure aluminum, however, rapidly passivates in seawater, reducing protective performance. Alloying with elements, such as zinc, indium, gallium, tin, and bismuth, improves activation, ensures uniform dissolution, and stabilizes long-term behavior. This review examines the influence of alloying elements on electrochemical performance, microstructure, and …
Published in International Journal of Metallurgy and Alloys · Vol. 11, Issue 2, 2025 · pp. 1–13 Read article
-
Experimental Investigation of MRR and Surface Finish Using Abrasive Jet Machining of Aluminum Alloy 7475
Abstract: In this thesis, different experiments are performed on aluminum alloy 7475 by varying various parameters such as pressure, sand feed, transverse speed and standoff distance, i.e. nozzle-to-work-piece distance to determine material removal rates and surface finish. Optimization is done using L9 orthogonal array by Taguchi technique to determine better parameters to obtain maximum removal rates and minimum surface roughness. The parameters considered are transverse speed 50, 100, 150 mm/min; standoff …
Published in International Journal of Manufacturing and Materials Processing · Vol. 4, Issue 1, 2018 · pp. 20–31 Read article
-
Tribological Behavior of Chilled Aluminum Alloy (LM-13) Reinforced with Titanium Carbide (TiC) Metal Matrix Composites for Automobile Applications.
Abstract: In the present research, aluminum alloy (LM13) Metal Matrix Composite (MMC) is prepared by stir casting technique and is reinforced with titanium carbide (TiC) particulates in the weight percent ranging from 3 wt.% to 15 wt.% in the steps of 3 wt.%. The dispersoid i.e. TiC particle size added varies between 100–200 µm. The resulting MMCs were solidified under the influence of copper chill of 25 mm thickness to study …
Published in International Journal of Composite and Constituent Materials · Vol. 6, Issue 2, 2020 · pp. 24–46 Read article
-
Fabrication, Microstructure and Mechanical Behavior of Aluminum Alloy (LM-13) Reinforced with Nano-ZrO2 Particulate Chilled Nano-Metal Matrix Composites (CNMMCs)
Abstract: In the present research, aluminum alloy (LM13) Metal Matrix Composite (MMC) is prepared by stir casting technique and is reinforced with ZrO2 particulates in the weight percent ranging from 3 wt.% to 12 wt.% in the steps of 3 wt.%. The reinforcement i.e., ZrO2 particle size added varies between 100–200 nm. The resulting CNMMCs are solidified under the influence of copper chill of 25 mm thickness to study the effect …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 6, Issue 2, 2020 · pp. 17–30 Read article
-
A Study on Stress Analysis of Aluminum Alloy Solidified in Metallic Molds
Abstract: Abstract The casting technique is regarded as the primary manufacturing process. It has several process parameters that affect the cast structure. Mold geometry is considered one of the most important metal parameters to cast. In the current work, the influence of mold geometries on mechanical properties (deformation and stress concentration) of liquid Aluminum alloy solidified in the steel mold is assessed using ANSYS simulation software. Molds were subject to a …
Published in International Journal of Manufacturing and Materials Processing · Vol. 10, Issue 2, 2024 · pp. 10–15 Read article
-
OPTIMIZING CUTTING PARAMETERS OF AL2O3PARTICLE REINFORCED 6061 ALUMINUM ALLOY COMPOSITES IN TURNING USING TAGUCHI METHOD
Abstract: Today’s extremely challenging manufacturing scenario puts a clear impetus on developing newer materials and efficient production methods to process them in order to survive and sustain, which also provides immense research opportunities to constantly upgrade and optimize existing processes. The current study was started with an objective of optimizing cutting parameters in turning operation of Al2O3 reinforced 6061 Aluminum alloy composite (PAMC) such as speed, feed, depth of cut and …
Published in International Journal of Computer Aided Manufacturing · Vol. 1, Issue 2, 2016 · pp. 28–37 Read article
-
Study of Thermal Stresses on Cast Iron and Aluminum Alloy V8 Cylinder Blocks for A Four Stroke CI Engine Without any Application of Cooling Systems
Abstract: The purpose of this paper is to investigate the thermal stresses experienced by a V8 cylinder block of a four stroke CI engine at a specific point in time during the engine's operation. Two case studies were performed for the cylinder block with different materials. Aluminum A356 T6 and Iron Cast are the materials used in these case studies for the cylinder block. Pressures and temperatures were applied only to …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 7, Issue 2, 2021 · pp. 6–19 Read article
-
Three body Abrasive wear behavior of A356 Aluminum alloy in different Solution treated condition
Abstract: In the present study, solution treatment of A356 Al alloy was carried out in three different ways namely T4-Solution Treatment – TB Condition, T5-Precipitation (Ageing) – TE Condition and T6-Solution Treatment and Precipitation Hardening – TF Conditions. Three body abrasive tests were carried out for all the solution treated samples as well as base metal. The influence of the heat treatment on the microstructure, hardness and abrasive wear resistance behaviour …
Published in International Journal of Composite Materials and Matrices · Vol. 4, Issue 2, 2018 · pp. 27–32 Read article
-
Optimization of Process Parameters of GMAW for Penetration, Toughness and Tensile Strength by using Taguchi Method
Abstract: Aluminum and its alloys are having variety of applications in Aircraft, food processing etc. Moreover; the use of Aluminum and its alloys are increasing day by day due to its specific properties, like light weight, high strength, and excellent corrosion resistance. However; the present study is planned to analyze and optimize the aluminum weld joint characteristics like tensile strength, penetration and toughness by using Gas Metal arc welding (GMAW) welding. …
Published in International Journal of Mechanics and Design · Vol. 5, Issue 1, 2019 · pp. 1–9 Read article
-
ENHANCEMENT OF MECHANICAL PROPERTIES OF ALLOY 61S BY REINFORCING NANO COMPOSITES
Abstract: During recent decades, a lot of interest had shown in the materials production with nano sized grains. Especially, the aluminum alloys and its composites are widely used for demanding structural applications due to combination of corrosion resistance, formability, weldability and, mechanical properties. The demand for toughness, higher strength and, strength and weight ratio of aluminum alloys for the structural application is ever growing owing to the increasing importance of achieving …
Published in International Journal of Metallurgy and Alloys · Vol. 5, Issue 2, 2019 · pp. 18–36 Read article
-
A Review on Resistance Spot Welding of Dissimilar Metal
Abstract: An extensive analysis of resistance spot welding in dissimilar metals is presented in this review paper. Resistance spot welding (RSW) is a joining technique that is frequently used in various sectors and most importantly in automotive sectors because of its effectiveness and efficiency in creating strong welded joints. This paper provides basic understanding of the various aspects of work done on dissimilar metals. It also gives an understanding of the …
Published in International Journal of Metallurgy and Alloys · Vol. 10, Issue 1, 2024 · pp. 12–24 Read article
-
Optimization of Pulse Current TIG Welding Parameters for Enhanced Performance of CompositeAluminum Alloy Joints
Abstract: Abstract Tungsten Inert Gas (TIG) welding is highly regarded as the primary welding method, especially for challenging metals like aluminum. Pulsed current TIG welding has been specifically developed for welding aluminum alloys. Composite weld joints of aluminum alloys AA5052 and AA6063 find extensive use in diverse sectors, such as automotive and marine applications, where significant mechanical properties and corrosion resistance are required. It is crucial to carefully select the process …
Published in International Journal of Mechanics and Design · Vol. 11, Issue 2, 2025 Read article
-
Importance of Mathematical Modeling (Response Surface Methodology) in Equal Channel Angular Pressing
Abstract: Severe plastic deformation is a technique for producing a deformation. Equal channel angular pressing is one of the unique methods for producing high plastic deformation in Aluminum alloys due to its quality of having the same dimensions after processing. In present work, A die was designed on the basis of a mathematical model generated by RSM. Variation in die geometry and other conditions were represented in present work. ANOVA presented …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 6, Issue 1, 2020 · pp. 46–54 Read article
-
Evaluation of Deformation Behavior of a Structural Pipe Bracket Under Static Loading Using Finite-Element Analysis
Abstract: This study presents a comprehensive structural integrity assessment and comparative static response analysis of an industrial support bracket subjected to varying mechanical loading conditions using the finite element method (FEM). Industrial brackets are essential load-bearing components in mechanical and structural systems, where adequate stiffness, strength, and dimensional stability are critical for ensuring operational reliability and structural safety. The primary objective of this investigation is to evaluate the influence of material …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 12, Issue 2, 2026 · pp. 1–12 Read article
-
Experimental Investigation of FSW on Al 6061-T6 MG Dissimilar Joints
Abstract: Friction Stir Welding (FSW) is a solid-state joining technique that has shown significant potential for welding dissimilar materials, such as aluminum and magnesium alloys, which are difficult to join using conventional fusion welding methods due to large differences in their physical, thermal, and metallurgical properties. During FSW, contact between the rotating, wear-resistant tool shoulder, the pin, and the work piece produces frictional energy. Additional thermal energy develops because of intense …
Published in International Journal of Manufacturing and Materials Processing · Vol. 12, Issue 2, 2026 · pp. 1–12 Read article
-
Microstructural and Hardness Study of A390/20wt.% SiC Functionally Graded Metal Matrix Composite
Abstract: Functionally graded materials are the upcoming new class of advanced materials, which exhibit gradual change in the microstructure and the composition in a definite direction, and hence variation in functional performance within a part. Functionally graded metal matrix composites (FGMMC) are FGM with metal and ceramic constituents. Aluminum-Silicon alloys are well-known for their unique combination of desirable characteristics, which includes excellent castability and less density combined with good mechanical properties. …
Published in International Journal of Manufacturing and Materials Processing · Vol. 6, Issue 2, 2020 · pp. 52–58 Read article
-
Electrochemical impendence study of an AL 8088 /SiC Nano composite immersed in 1M Acid chloride Medium
Abstract: Aluminum Nano composite have received considerable attention among researcher and engineering as a prominent choice material for building and construction purposes. The preference of Aluminum Nano composite as replacement for conventional Aluminum alloy is chiefly due excellent strength to weight ratio .However the problem of accelerated corrosion attributed to the reinforcement particle used in the production of Aluminum Nano composite is well documented in the literature and serves as potential …
Published in International Journal of Applied Nanotechnology · Vol. 4, Issue 2, 2018 · pp. 6–12 Read article
-
Enhancing Machining Sustainability: ComparativeAnalysis of Dry, Minimum Quantity Lubrication, andCryogenic Cooling Methods
Abstract: AbstractSustainable machining is crucial for minimizing the environmental, economic, and social challengesassociated with modern manufacturing. This study reviews environmentally sustainable machiningapproaches including dry machining, Minimum Quantity Lubrication (MQL), and cryogenic cooling,and evaluates their effects on machining performance and sustainability. Key performance indicators,such as surface integrity, tool wear, energy efficiency and cutting forces, are analyzed across variousmaterials. The findings demonstrate that dry machining eliminates liquid waste but is often limited bytool …
Published in International Journal of Manufacturing and Materials Processing · Vol. 11, Issue 1, 2025 · pp. 1–7 Read article