Search
19 articles for “Hot-pressing”
-
Study on Preparation and Properties of Agro-waste Particleboard at Various Press Temperatures
Abstract: This study concerns the influence of temperature on changes in physical and mechanical properties of particleboard fabricated from betel nut (Areca catechu L) fiber (Agro-waste) and urea-formaldehyde adhesive during hot-pressing with multiple press temperatures (120, 130, 140, 150 and 160°C) at 15 minutes. The physical and mechanical properties of particleboards were determined by British Standard (BS-1811) and Indian Standard (IS-3087) Methods. For some physical and mechanical properties, it appears that …
Published in International Journal of Composite and Constituent Materials · Vol. 7, Issue 1, 2021 · pp. 40–47 Read article
-
Green Adhesive—Using Glyoxalated Lignin and Hydrogenated Resin as Ecologically Safe Wood Adhesive for Interior Plywood
Abstract: Petroleum-based adhesive such as urea formaldehyde and phenol formaldehyde resin dominates adhesive market which releases formaldehyde and VOC to the environment. The purpose of this study is to develop an adhesive based on isocyanate in combination with compounds from renewable sources like lignin, protein and starch. Adhesive formulation was developed by incorporation of hydrogenated resin, corn starch/PVOH emulsion with glyoxalated lignin (GL) and evaluation properties of the adhesive with plywood …
Published in International Journal of Polymer Science and Engineering · Vol. 1, Issue 1-2, 2015 · pp. 23–27 Read article
-
Analytical Study of Ceramic Compositions: Lamination and Fracture Toughness
Abstract: This study investigates the characteristics and fabrication techniques of laminated ceramic composites, focusing on various glass-ceramic systems, including alumina, BaTiO3/Al2O3, and LiO2‐ZrO2‐SiO2‐Al2O3 (LZSA). The inherent brittleness of ceramics, attributed to surface flaws and their limited toughness, necessitates the development of layered structures to enhance mechanical reliability. Layered ceramics demonstrate improved fracture toughness, crucial for applications in aerospace, biomedicine, and military armor. Techniques such as tape casting, electrophoretic deposition, and advanced …
Published in International Journal of Analytical and Applied Chemistry · Vol. 10, Issue 2, 2024 · pp. 38–44 Read article
-
Experimental Study on the Surface Properties of Coconut Husk Fiber and Banana Fiber Treated with Sodium Lauryl Sulfate
Abstract: The focus of modern research is on using natural, biodegradable, and renewable materials in place of synthetic ones. Composites made from natural fibers are undergoing extensive research because of their unusual characteristics and eco-friendliness. Natural fibers have the benefits of being readily available, simple to handle, and biodegradable. One of the best ways to improve the mechanical characteristics of polymer is to reinforce it with natural fibers. With hybrid composites, …
Published in International Journal of Composite and Constituent Materials · Vol. 10, Issue 2, 2024 · pp. 13–24 Read article
-
Plant-Drive Natural Fiber Reinforced ThermoplasticComposites by Film Stacking Method
Abstract: Fiber reinforced polymer composites have a long history of being significant in a variety of applications because of their exceptional specific strength and modulus. An alternative to synthetic polymers that pollute the environment is provided by thermoplastic and vetiver fiber (VF) composites. In comparison to conventional reinforcing fibers (glass and carbon fiber), natural fibers (such as banana, sisal, coir, jute, vetiver, flax, hemp, and kenaf) have the following benefits: they …
Published in International Journal of Polymer Science and Engineering · Vol. 10, Issue 1, 2024 · pp. 29–39 Read article
-
Physico-Mechanical Performance of Waste Plant Fiber Reinforced Thermoplastic Composites for Automotive Applications
Abstract: To maximize the interfacial bond strength, it is necessary to investigate the direct relationship between the degree of fiber-matrix adhesion and the mechanical and fracture behavior of composites. In this work, the strength of the interfacial bond between polypropylene (PP) and waste plant fiber (Dharose plant fiber, DF) that have been subjected to ultraviolet radiation (UV) was established. By using hot press molding, unidirectional composites of PP with dharose plant …
Published in International Journal of Chemical Engineering and Processing · Vol. 9, Issue 1, 2023 · pp. 14–24 Read article
-
Thermo-Mechanical Properties of Banana and Jute Fiber Reinforced Polypropylene Composites
Abstract: Abstract Present research aims at finding out better fiber reinforcement for low cost and eco-friendly polymer matrix composite. Polypropylene was chosen as a matrix, while jute and banana fiber were chosen as reinforcement. Composites were prepared by using a hot press machine. Fiber loading was varied at 0, 4 and 8 volume%. Both raw jute and banana fiber was chemically treated with 5 wt% sodium carbonate and composites were also …
Published in International Journal of Composite Materials and Matrices · Vol. 5, Issue 2, 2019 · pp. 37–47 Read article
-
Flexural Properties of Vetiver Fiber Reinforced Polyethylene Composite are Affected by Processing Parameters
Abstract: Fiber reinforced polymer composites have long been influential in a variety of applications due to their great particular strength and modulus. Vetiver fiber (VF)/thermoplastic composites are an alternative material for solving the environmental pollution problem related to synthetic polymers. The benefits of natural fibers (such as coir, jute, vetiver, calotropis gigantea, flax, hemp, kenaf, etc.) over traditional reinforcing fibers (glass and carbon fiber) are their easy obtainability, renewability, non-corrosive nature, …
Published in International Journal of Composite Materials and Matrices · Vol. 9, Issue 1, 2023 · pp. 12–20 Read article
-
Fabrication and Study of Natural Plant Fiber Reinforced Polymer Composites
Abstract: Snake grass fiber (sansevieria trifasciata fiber, STF)-strengthened polypropylene (PP) based composites (30 wt% by fiber) was made by hot press technique. STFs were modified by ultraviolet (UV) rays and the composites they produced were evaluated. Optimized STFs were again modified with monomer using UV rays to progress the mechanical features of the composites. Monomer concentration and no. of UV rays were optimized in terms of grafting and mechanical features of …
Published in International Journal of Polymer Science and Engineering · Vol. 7, Issue 1, 2021 · pp. 11–22 Read article
-
Performance Evaluation of the Power Cartridge in the Closed Vessel for Water-Jet Application
Abstract: The power cartridges are generally called as gas generator devices utilized in disruptor system to generate a high velocity water jet. This high velocity water-jet helps in the damage of suspected improvised explosive devices (IEDs). The closed vessel (CV) methodology for performance evaluation in respect of the power cartridge is explained in this research paper. To determine the performance, the CV is fabricated. The gas pressure generated by the power …
Published in International Journal of Energetic Materials · Vol. 7, Issue 1, 2021 · pp. 1–12 Read article
-
Gum Rosin: Manufacturing, Applications, Market Scenario and Opportunities
Abstract: A review about gum rosin and its derivatives has been compiled. Rosin, also known as colophony, is a naturally occurring, abundantly available, biodegradable, cheap and non-toxic raw material. It can be easily modified to obtain industrially useful products. Gum Rosin and its derivatives are widely used in numerous industrial applications such as resins, monomers, intermediates, curing agents, emulsifiers, medicines, tablets, energy drinks, biocides etc. Other industrial usage are in rubber …
Published in International Journal of Polymer Science and Engineering · Vol. 9, Issue 1, 2023 · pp. 32–37 Read article
-
CFD Study on the Effect of Air Bubble Injection Performance of a Horizontal Helical Shell and Coiled Tube Heat Exchanger
Abstract: In present review, a shell and curled cylinder heat exchanger will be numerically considered. The creation technique for helically looped tube which contains turbulator and furthermore the impacts of turbulator on warm and frictional qualities of hotness exchanger will be introduced in this review. CFD examination on ANSYS FUENT programming will be acted in two principle modes. In first mode, the liquid of looped cylinder will be water and in …
Published in International Journal of Mechanics and Design · Vol. 7, Issue 2, 2021 · pp. 1–29 Read article
-
Rocket Propellants as an Efficient Energetic Material
Abstract: Rocket propellant is either a high oxygen containing fuel or a mixture of fuel plus oxidant, whose combustion takes place, in a definite and controlled manner with the evolution of a huge volume of gas. In the rocket engine, the propellant is burnt in the combustion chamber and the hot jet of gases (usually at very high pressures, with combustion temperatures approaching 3000K) escapes through the nozzle at very high …
Published in International Journal of Energetic Materials · Vol. 3, Issue 2, 2017 · pp. 19–22 Read article
-
A study on effects of mass flow rate and compressor pressure ratio on gas turbine cycle performance
Abstract: Gas turbines are rotating machines that work based on the energy of gases from combustion. Each gas turbine includes a compressor to compress air, a combustion chamber to mix air with fuel and ignite it, and a turbine to convert the energy of the hot, compressed gases into mechanical energy. Gas turbines have many advantages over steam turbines, such as small volume, quick installation, quick start-up, easy operation and the …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 8, Issue 2, 2022 · pp. 1–8 Read article
-
Thermodynamic Explanation on Surface-Driven Capillary Flow of Working Liquids in the Microfluidic Devices Fabricated by Polymers
Abstract: In this experimental work, total 100 individual microfluidic devices are fabricated by polymers using author’s own hands-on completely. A set of straight microchannels, gradual expansion microchannels, sudden expansion microchannels and sudden contraction microchannels are fabricated by SU-8 using the maskless lithography and indirect bonding technique. Another set of straight microchannels, gradual expansion microchannels, sudden expansion microchannels and sudden contraction microchannels are fabricated by PMMA using the maskless lithography, hot embossing …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 6, Issue 1, 2020 · pp. 45–70 Read article
-
A Work Study on Forging Processes and Its Various Defects
Abstract: The aim of this review paper is to investigate the forging defects and mainly to understand different forging processes. A brief description about classification of forging process on the basis of temperature of work piece (hot, cold, and warm forging) and on the basis of arrangement of dies is given. Die design parameters, die material requirements and selection of proper die materials are briefly discussed. Also, briefly described the forging …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 3, Issue 2, 2017 · pp. 18–24 Read article
-
EFFECT OF WARMING TECHNIQUE FOR PREVENTION OF POST-OPERATIVE HYPOTHERMIA AMONG LAPAROTOMY SURGERY PATIENTS UNDERGONE GENERAL ANESTHESIA ADMITTED IN SELECTED HOSPITAL
Abstract: Introduction: Thermoregulation is the regulation of body temperature, an important function of any organism. The body temperature is a vital parameter, like the respiration rate, heart rate and blood pressure. Hypothermia refers to the cooling of the body below the normal temperature range 36°C to 37.50C is normally accepted. Below this value, organ function begins to deteriorate. Temperatures between 360C to around 33°C are considered mild hypothermia. There are many …
Published in International Journal of Medical Surgical Nursing · Vol. 5, Issue 1, 2022 · pp. 38–45 Read article
-
Importance of Infrastructure Planning
Abstract: In Chennai, Tamil Nadu, India, November 2015 recorded heavy rainfall. During the first and second week of December 2015 there was continuous rainfall making everything out of gear at Chennai. Morning onwards there was continuous rain after a very hot summer season. The rain was nonstop and falling heavily. Intense rain continued for some days. Rain equivalent to a month got caught in a day’s rainfall. Whole of Chennai got …
Published in International Journal of Water Resources Engineering · Vol. 1, Issue 1, 2015 · pp. 31–32 Read article
-
Performance of Industrial Gas Turbines through Blade Design and Cooling Strategies
Abstract: Industrial gas turbines are steam engines that leverage an ongoing stream of high pressure air togenerate mechanical power. These machines can be used for a variety of industrial applications,including that of the manufacturing of electricity, oil and gas, and the propulsion of ships andplanes. The classification can be made of an industrial gas turbine are a turbine, a combustionchamber, and a compressor. Incoming air is compressed by the compressor to …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 8, Issue 2, 2022 · pp. 36–40 Read article