Search
99 articles for “Physical and mechanical properties”
-
Short Communication: Physico-Mechanical Properties of Rice Husk Geopolymers
Abstract: Concrete may be a wide used construction material for varied kinds of structures thanks to its structural stability and strength. However, the assembly of hydraulic cement, a main element of constructing concrete, contributes important quantity of greenhouse emission, as a result of the assembly of 1 ton of hydraulic cement additionally releases regarding one ton of dioxide gas into the atmosphere. Additionally the extent of energy needed to provide OPC …
Published in International Journal of Structural Engineering and Analysis · Vol. 2, Issue 1, 2016 · pp. 34–35 Read article
-
Effect of Addition of Phosphates on Thermal, Physical and Mechanical Properties of Phenolic and Amino Bonded Wood Composite
Abstract: Properties of flame retardant molecule board made by treating the molecule (crowded deltoids) with mono ammonium hosphate/diammonium phosphate (MAP/DAP) creation were examined. Two convergences of (0, 1, and 2%) of flame retardants ere joined to the particles on broiler dry weight of the particles. Melamine Urea Formaldehyde tar (MUF) and phenol formaldehyde pitch (PF) were utilized to produce the exploratory boards. The fire retardancy and warm strength of the composites …
Published in International Journal of Composite Materials and Matrices · Vol. 2, Issue 1, 2016 · pp. 8–14 Read article
-
Study on Mechanical and Physical Properties of Wood-Plastic Nanocomposites after Fiber Surface Treatment
Abstract: Numerous composites based on high-density polyethylene (HDPE), wood flour (WF), and nanoclay (Cloisite 30B) were prepared by melt compounding followed by injection mold. This paper aims to evaluate the feasibility of using HDPE and underutilized WF as a material for the development of woodplastic composites, as well as the strengthening effect of nanoclay on them. To develop the poor interfacial interaction between the hydrophilic WF and hydrophobic HDPE matrix, as …
Published in International Journal of Chemical Engineering and Processing · Vol. 8, Issue 2, 2022 · pp. 43–53 Read article
-
Effects of Industrial Waste Filler Content and Compatibilizer on the Performance of Thermoplastic Polymer Composites
Abstract: In this study, we examine the physico-mechanical characteristics of waste filler-thermoplastic polymer composites in relation to the industrial waste filler mixing ratio and compatibilizer concentrations. Three degrees of coupling agent (Epolene E-43) content and four levels of waste filler to thermoplastic polymer mixing ratios were used in the experiment to examine the physical and mechanical characteristics of the composite. As was to be predicted, composite density grew as waste filler …
Published in International Journal of Applied Nanotechnology · Vol. 9, Issue 2, 2023 · pp. 12–21 Read article
-
Production and Evaluation of Composites Made from Waste Material and Recycled Poly(Ethylene Terephthalate)
Abstract: A significant ecological concern that third-world countries are currently facing is the economically viable use of lignocellulose waste. In addition to reducing the cost of the composite, cellulosic fiber composites created from industrial waste would enable the efficient use of a waste material that is presently disposed of or burned. Recycled poly (ethylene terephthalate) was used in this work as a major phase (matrix) and industrial waste material was used …
Published in International Journal of Energetic Materials · Vol. 11, Issue 1, 2025 · pp. 1–12 Read article
-
Study on Preparation and Properties of Agro-waste Particleboard at Various Press Temperatures
Abstract: This study concerns the influence of temperature on changes in physical and mechanical properties of particleboard fabricated from betel nut (Areca catechu L) fiber (Agro-waste) and urea-formaldehyde adhesive during hot-pressing with multiple press temperatures (120, 130, 140, 150 and 160°C) at 15 minutes. The physical and mechanical properties of particleboards were determined by British Standard (BS-1811) and Indian Standard (IS-3087) Methods. For some physical and mechanical properties, it appears that …
Published in International Journal of Composite and Constituent Materials · Vol. 7, Issue 1, 2021 · pp. 40–47 Read article
-
Physico-mechanical, and Biodegradation Properties of Polyethylene/Food Polysaccharide Blends
Abstract: Hydrophilic/polar and hydrophobic/non-polar materials do not blend well, which causes issues in the production of biodegradable plastic. Plasticizer (glycerol) was one of the components added to the mixture to increase compatibility between the two materials; this also made the film less brittle. The purpose of this study is to look at how different food polysaccharide contents affect the physico-mechanical, and biodegradation characteristics of novel polymeric-based bio-composite films made from low-density …
Published in International Journal of Composite and Constituent Materials · Vol. 9, Issue 1, 2023 · pp. 1–13 Read article
-
Physico-Mechanical and Degradation Properties on Agro-Waste Based Polymer Composites Reinforced with Banana Bunch Fiber
Abstract: The usage of banana bunch fibers in polymer composite parts for the automotive, aerospace, and construction industries is growing. As people grow more aware of the danger of synthetic fibers, banana bunch fibers are being used in an increasing variety of sectors. It is important to recognize that humans depend on the Earth for survival, not the other way around. This understanding drives scientists and policymakers to seek alternatives to …
Published in International Journal of Composite and Constituent Materials · Vol. 10, Issue 2, 2024 · pp. 33–43 Read article
-
Abrasion resistance, compressive strength and elasticity modulus of recycled aggregate concrete (RAC) included lower quality recycled aggregate with and without silica fume
Abstract: The usage of recycled aggregate (RA) for concrete works is spreading for gaining wide acceptance around the world, and total amount of RA utilized in concrete industry increases day-by-day. RA is used in many concrete products, such as concrete interlocking blocks, pavements, etc. One of the physical causes of concrete deterioration is surface wear or loss of mass for concrete products which are especially exposed to vehicular traffic (i.e., industrial …
Published in International Journal of Concrete Technology · Vol. 2, Issue 1, 2016 · pp. 1–18 Read article
-
Effect of Glass Fiber, Carbon Fiber, and Hybrid Form on Tensile Properties of Pa66/Pp Polymer Composites
Abstract: Mechanical loadings are applied to polymer materials, which are used in mechanical engineering applications. Usually, photopolymer fails to meet them, so some modification must be done to the polymer material. Adding fillers and fibers to the polymer will strengthen it by the polymer blending method. In this investigation, mechanical properties of glass fibers and carbon fibers and combinations of glass and carbon fiber are added to polymer composites. Considerable effort …
Published in International Journal of Mechanics and Design · Vol. 10, Issue 2, 2024 · pp. 27–33 Read article
-
An Advanced Nanomaterials Production in Microgravity
Abstract: Nanomaterials are matrices, containing nano sized particles. The presence of nanoparticles in the matrix leads to a sharp change in the properties of the resulting nanomaterial for the better, including mechanical strength, impact strength, electrical or thermal conductivity. Today, nanocomposites are obtained by laser decomposition of an aerosol solution of ferrocene in toluene, which results in the formation of a nanocomposite containing amorphous carbon nanoparticles and isolated iron-based nanoparticles in …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 9, Issue 1, 2023 · pp. 30–34 Read article
-
Surface Modification and Performance Evaluation of Biologically Degummed Lady's Finger Bast Fibers
Abstract: This research aims to investigate the physicomechanical characteristics of biologically degummed lady's finger bast fiber (LFF) and to walk through the entire process of turning LFF into a commercial cellulosic fiber that can be used globally in a variety of textile applications, including carpets, oil and liquid absorption, packaging, basic textile products, coarse ornamental textile products, geo-textiles, and reinforcements in polymer matrix composites. This article describes the application of different …
Published in International Journal of Polymer Science and Engineering · Vol. 11, Issue 1, 2025 Read article
-
Influence of Rock Properties on Sound Level
Abstract: Rocks used as building materials or for some other purposes are tested for their physico-mechanical properties to assess their suitability. For this, rock boulders excavated from the quarries are cut, shaped and crushed in the laboratory. While carrying out these processes, it generates sound. In this study, rock boulders received from the industries were cut in the form of cylindrical shape to determine its compressive strength, density and Young’s modulus.For …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 7, Issue 1, 2021 · pp. 39–44 Read article
-
Analysis of Mechanical and Corrosion Properties of AISI50110 (EN31) Steel With and Without Heat Treatment
Abstract: The mechanical properties of steel decide its applicability for a particular condition. Heat treatment processes are commonly used to enhance the required properties of steel. The material was machined to ASTM standards and then different tests like microstructure analysis, hardness test, impact test, etc. were carried out after the heat treatment processes. All the tests were carried out in the mechanical workshops and laboratories under the supervision of their respective …
Published in International Journal of Metallurgy and Alloys · Vol. 1, Issue 1, 2015 · pp. 24–41 Read article
-
3D printing of polymers by fused deposition modeling (FDM): filament ink to composite materials
Abstract: 3D printing technology has gained significant attention for its rapid manufacturing of on-demand customized objects from digital computer-aided design (CAD) model without need molds or machining. Polymers are the most utilize a class of commercial materials in additive manufacturing (AM) because of excellent physico-mechanical properties with desired objects. Fused deposition modeling is the filament based printing process which most widely popular for commercial thermoplastics polymer than other manufacturing techniques because …
Published in International Journal of Composite Materials and Matrices · Vol. 5, Issue 1, 2019 · pp. 1–14 Read article
-
Manufacturing of BWP-Grade Plywood from Resin Adhesive Using Animal Protein (Glue) by Partial Replacement of Phenol
Abstract: Abstract This paper presents the development of plyboard using phenol–glue–formaldehyde (PGF) resin and their basic mechanical properties. Phenoplast and aminoplast-based resins is the important adhesive for the manufacturing of boiling water proof (BWP) grade, shuttering and moisture resistance plywood. Environmental concerns and higher cost of petroleum-based resins have resulted in the development of technologies to replace phenol partially by biomaterials for the manufacturing of resin adhesive. Natural bio-based materials such …
Published in International Journal of Polymer Science and Engineering · Vol. 1, Issue 1-2, 2015 Read article
-
Use of the electrolysis hydrogen bubbles and process of vibroturbulization for advanced gasfilled materials production
Abstract: Production of gasfilled materials with the high physical mechanical properties plays a large role for effective use of these materials in chemical industry, medicine, machine building and space technology. Existing methods of gasfilled materials production such as the creation and the foaming of the water dispersions of high polymers using the thermal decomposition of organic and inorganic matter, using the radiation destruction of thermoplastic polymer or using the injection of …
Published in International Journal of Analytical and Applied Chemistry · Vol. 5, Issue 2, 2019 · pp. 1–6 Read article
-
Regulation of Ca(OH)2 Concentration in the Hardening System “Gypsum Binder-Portland Cement” By Introducing Ash and Slag Additives when Producing Composite Gypsum Binders (CGB)
Abstract: This paper presents the results of the research and development of composite gypsum binders (CGB) based on technogenic raw materials in the form of ash and slag mixtures of fuel wastes, which reduces the consumption of Portland cement clinker up to 85% in comparison with traditional composite binders. The optimal compositions of the CGB are proposed. The impact of the type of mineral additives of technogenic origin and superplasticizer on …
Published in International Journal of Composite and Constituent Materials · Vol. 7, Issue 1, 2021 · pp. 1–8 Read article
-
Environment Friendly, Exterior Grade Resin Adhesive from Phenol-Animal Glue Formaldehyde (PGF)
Abstract: Phenoplast and aminoplast based resins are the important adhesive for the manufacturing of marine grade, shuttering and moisture resistance plywood. Environmental concerns and higher cost of petroleum based resins have resulted in the development of technologies to replace phenol partially by biomaterials for the manufacturing of resin adhesive. Natural bio-based materials such as tannin, CNSL (cardanol), lignin soya etc. are used as partial substitution of phenol. This paper presents the …
Published in International Journal of Polymer Science and Engineering · Vol. 1, Issue 1-2, 2015 · pp. 16–22 Read article
-
A Review on Polybutadiene Rubber Composites
Abstract: Rubber composites are crucial materials that obtained by the combination of two or more components i.e. rubber and filler, comprising with different fundamental properties. The composites are lighter yet stronger materials in nature with intermediate characteristics of both the initial ingredients. Polybutadiene rubber (PBR) is one of the highly produced global synthetic rubber having significant industrial applications. PBR composites showed improved physical, mechanical and thermal properties, with greater strength, resistance …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 2, 2020 · pp. 1–19 Read article