Search
32 articles for “Pressure distribution”
-
Modelling and Analysis of Pressure Distribution of a Honing Machine Tool
Abstract: In the honing machining process it is very important that tool should with stand the pressure to create the pattern inside the cylinder. This project deals with the reverse engineering process, and selecting the appropriate pressure for honing tool and simulations are done at different pressure readings and the result of Forces on the component so that the productivity of the machine is improved. To achieve this we take a …
Published in International Journal of Analog Integrated Circuits · Vol. 4, Issue 2, 2018 · pp. 43–50 Read article
-
CFD Analysis of Hydrodynamic Journal Bearing
Abstract: Journal bearings have the longest history on scientific study of any class of fluid-film bearings. These journal bearings are widely used in most of the rotating machineries due to its high load-carrying capacity and formation of fluid-film thickness during the operation. This research paper represents performance evaluation of hydrodynamic journal bearing using Computational Fluid Dynamics (CFD) approach. For this study, two different geometrical bearings are considered (circular and non-circular) operating …
Published in International Journal of Manufacturing and Materials Processing · Vol. 4, Issue 2, 2018 · pp. 23–29 Read article
-
Numerical Techniques Applied on Hydrostatic Bearing using Computational Fluid Dynamics
Abstract: In hydrostatic bearing, the oil or lubricant is supplied to the required place in bearing from external source that place is the recess. The oil enters axially and leaves perpendicularly. The important task for the purpose of analysis is finding pressure distribution in the recess. The problem here is that, it is possible to find out analytical solution for one dimension, but it is not possible to find out pressure …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 4, Issue 2, 2018 · pp. 1–10 Read article
-
A study on C, H and L type prismatic buildings for Synoptic wind flow.
Abstract: The atmospheric boundary layer can be defined as part of the troposphere at the lowest level which is influenced by the presence of the earth’s surface, and responds to surface forcing within a timescale of about an hour or less. The boundary layer depth might differ from hundreds of meters to a few kilometers. The wind that blows due to Atmospheric Boundary Layer is known as synoptic wind. Moreover, thunderstorms …
Published in International Journal of Construction Engineering and Planning · Vol. 6, Issue 1, 2020 · pp. 6–14 Read article
-
The Effect of Stand-off Distance and Blast Yield OverStructure in Blast Test
Abstract: AbstractExplosive loads have garnered a lot of attention lately because of numerous unintentional and deliberateoccurrences that have affected important structures all over the world. As a result, there has been a lot ofresearch in this area over the last ten years. Although most of the early studies were empirical, morerecent studies have progressed into thorough and organized studies that focus on understanding thebehavior of structures subjected to blast loading conditions. …
Published in International Journal of Structural Engineering and Analysis · Vol. 12, Issue 1, 2026 Read article
-
The Biomechanical Impact of Slipper Sole Compliance on Lumbar Spine Load: A Quantitative Analysis of Indoor Footwear Ergonomics
Abstract: Abstract The global shift toward remote work has significantly increased the duration of indoor footwear usage, yet the ergonomic standards for slippers remain critically under-researched compared to athletic or industrial footwear. While "high-compliance" or soft slippers are traditionally marketed for immediate comfort, excessive mechanical softness may lead to foot instability, altered gait kinetics, and subsequent compensatory stress on the lumbar spine. This study aims to quantify the correlation between varying …
Published in International Journal of Mechanics and Design · Vol. 12, Issue 1, 2026 · pp. 30–35 Read article
-
THE EFFECT OF STAND OFF DISTANCE AND BLAST YIELD OVER STRUCTURE IN BLAST TEST
Abstract: Abstract Explosive loads have garnered a lot of attention lately because of numerous unintentional and deliberate occurrences that have affected important structures all over the world. As a result, there has been a lot of research in this area over the last ten years. Although the majority of the early studies were empirical, more recent studies have progressed into thorough and organised studies that focus on understanding the behaviour of …
Published in International Journal of Structural Engineering and Analysis · Vol. 12, Issue 1, 2026 Read article
-
Earthquake Resistant Design of an Intze Type RCC Overhead Tank
Abstract: It is well recognised that liquid storage tanks possess low ductility and energy absorbing capacity compared to conventional building. Accordingly, various design codes and guidelines provide higher level of design seismic forces for tanks. In this design principle for Intze type water tank, provisions from working stress method for static analysis and IITKGSDMA guidelines for dynamic analysis have been incorporated. Intze type water tank is used for high capacity storage …
Published in International Journal of Water Resources Engineering · Vol. 3, Issue 1, 2017 · pp. 34–55 Read article
-
Review on Seismic Analysis of Overhead Storage Reservoir
Abstract: Water is a human basic need for daily life. Sufficient water distribution in a certain area is depending on the design of a water tank. An overhead water tank is a large water storage container constructed to hold water supply at a certain height to pressurization of the water distribution system. Thus Water tanks are very important for public utility and industrial structure. Huge water mass concentrated at the top …
Published in International Journal of Structural Engineering and Analysis · Vol. 5, Issue 2, 2019 · pp. 25–33 Read article
-
Review On Bipolar Plate Geometric Design and Materials for Proton Exchange Membrane Fuel Cell Applications
Abstract: Abstract Bipolar plates (BPs) are vital components in proton exchange membrane fuel cells (PEMFCs), performing multiple essential functions that directly influence system efficiency, durability, and overall operational performance. They ensure uniform distribution of reactant gases across the active area, provide electrical conductivity between adjacent cells, assist in effective thermal management by dissipating heat generated during electrochemical reactions, and maintain proper sealing to prevent leakage of gases and coolant. Among these …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 11, Issue 2, 2025 · pp. 40–56 Read article
-
Performance Characterization of Couette FlowMembrane Module Through Computational FluidDynamics
Abstract: Membrane-based separation has been in rigorous applications in health services since the last fewdecennia. Dynamic Shear Enhanced Membrane Filtration Pilots (DSEMFPs) is a promising membranemodule. The first reported DSEMFPs was a Couette flow type module in 1985. It was used for collectingplasma from donors. This module consists of two concentric cylinders. The outer one is fixed while theinner one is rotating, having a membrane on the outer surface of it. …
Published in International Journal of Composite Materials and Matrices · Vol. 10, Issue 1, 2024 · pp. 1–5 Read article
-
Assessment of Foundation for Pier
Abstract: AbstractThe design and assessment of pier foundations are crucial due to the substantial loads they mustsupport. Piers are subjected to significant structural and dynamic loads, requiring a robustfoundation system to ensure stability and prevent excessive settlement or failure. A mat foundation istypically selected to distribute these heavy loads over a large area, minimizing pressure on theunderlying soil. The bearing capacity is assumed to be based on the presence of a …
Published in International Journal of Structural Engineering and Analysis · Vol. 10, Issue 2, 2024 · pp. 1–8 Read article
-
Bending Solutions of Fully Clamped Orthotropic Rectangular Thin Plate Using Finite Integral Transform Method
Abstract: Plate as an engineering material is used widely in several areas of Engineering work, especially civil engineering structures as slab. This research work presents the solutions to the bending of orthotropic thin rectangular plates, fully clamped at all edges and subjected to three different loading conditions such as uniformly distributed load, centrally loaded concentrated point load and hydrostatic pressure, using the finite integral transform method. The results derived from this …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 4, Issue 2, 2018 · pp. 12–21 Read article
-
Hydraulic Acceptability of Water Distribution Network of Tulunan Water District Using Epanet
Abstract: The study on Hydraulic Acceptability of Water Distribution Network of Tulunan Water District Using EPANET was conducted last June to July 2019. The main objectives of the study were to determine the acceptability of flow on existing pipeline during peak hours, acceptability of pressure on existing junctions during peak hours and the acceptability of the existing distribution network within 10-year projection. After approval, the Tulunan Water District provided the data …
Published in International Journal of Water Resources Engineering · Vol. 9, Issue 2, 2023 · pp. 1–20 Read article
-
Landslide Monitoring, Detection and Warning System by Wireless Sensor Network (WSN)
Abstract: Wireless sensor network (WSN) is one of the most hopeful field and has uncountable applications in the real-time systems. Execution of WSN in real-time system for landslide detection and warning system is discussed in the present paper. Sliding of rocks and soil is called landslide. It is triggered mostly because of heavy rainfall or melting of snow and can cause loss of lives and property. Using real-time monitoring the landslide …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 3, Issue 2, 2017 · pp. 24–28 Read article
-
Liquid–Liquid Equilibria of Water + Acetic Acid + Ethyl Acetate, Water + Acetic Acid + MIBK, Water + Acetic Acid + Mixed Solvent (Ethyl Acetate + MIBK) and Its Reliability
Abstract: In this work, binodal curves and tie-line liquid-liquid equilibria experimental data were obtained for the ternary systems water + acetic acid + ethyl acetate, water + acetic acid + methyl isobutyl ketone (MIBK) and water + acetic acid + mixed solvent (ethyl acetate + MIBK) at 293.15 K and atmospheric pressure by cloud-point titration method. Binodal curves, tie-line data, distribution coefficient and separation factor data were determined for these systems. …
Published in International Journal of Chemical Separation Technology · Vol. 7, Issue 2, 2021 · pp. 1–10 Read article
-
Hydrodynamic Study Through Computational FluidDynamics of Radial Flow Membrane Module
Abstract: Historically Crossflow Membrane modules came first in the membrane-based separation (MBS)process. Its high shear generation overcomes two non-idealities concentration polarization andsubsequent fouling. Primarily, high shear generation and large surface area create a positive domainfor large applications. Thereafter, feed flow rate-dependent shear generation creates a hindrance.This obstruction is overcome with Dynamic Shear Enhanced Membrane Filtration Pilot (DSEMFPs).Low surface area is a vital drawback of DSEMFPs. This radial flow membrane module with …
Published in International Journal of Polymer Science and Engineering · Vol. 10, Issue 1, 2024 · pp. 8–15 Read article
-
Modified Design Improvement Study and Optimization of a intake Manifold to Obtain Unequal Distribution of Velocity for Optimal Diesel Engine Performance
Abstract: Geometrical design of intake manifold has been found very significant for the better performance of an I.C. Engine. It becomes less effective at the intake manifold's runner's outlets due to an uneven flow distribution of the intake air. With an increase in velocity at the distribution channels, the presented study seeks to make this uneven velocity distribution nearly equal without requiring any additional significant changes to the entrance manifold's construction. …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 9, Issue 1, 2023 · pp. 13–23 Read article
-
DESIGN AND ANALYSIS OF WATER DISTRIBUTION SYSTEM FOR KOLOSHI VILLAGE USING EPANET 2.0
Abstract: The main objective of this project is to design the water distribution network of KOLOSHI VILLAGE, MURBAD, THANE, using EPANET software. In order to supply water to the consumers and fulfil the water demand of the village, it is essential to provide the sufficient and uniform quantity of water through the designed network of pipes. And we also have to check whether the water supplied to the consumers is in …
Published in International Journal of Urban Design · Vol. 4, Issue 1, 2021 · pp. 17–25 Read article
-
Design and Finite Element Analysis of Refractory Boiler Shell for Optimum Weight
Abstract: This paper deals with the stress analysis of boiler shell with refactory. By using finite element method, a stress analysis has been carried out under the application of pressure at the inner surface of boiler shell. Von-Mises stresses and maximum shear stresses are found. Currently we are working on the condition in order to find temperature distribution so that it will be helpful for us to get thermal analysis and …
Published in International Journal of Computer Aided Manufacturing · Vol. 4, Issue 1, 2018 · pp. 48–54 Read article