Search
52 articles for “Toughness”
-
Analytical Study of Ceramic Compositions: Lamination and Fracture Toughness
Abstract: This study investigates the characteristics and fabrication techniques of laminated ceramic composites, focusing on various glass-ceramic systems, including alumina, BaTiO3/Al2O3, and LiO2‐ZrO2‐SiO2‐Al2O3 (LZSA). The inherent brittleness of ceramics, attributed to surface flaws and their limited toughness, necessitates the development of layered structures to enhance mechanical reliability. Layered ceramics demonstrate improved fracture toughness, crucial for applications in aerospace, biomedicine, and military armor. Techniques such as tape casting, electrophoretic deposition, and advanced …
Published in International Journal of Analytical and Applied Chemistry · Vol. 10, Issue 2, 2024 · pp. 38–44 Read article
-
Advanced Techniques for Delamination Toughening in Carbon Fibre Reinforced Composites
Abstract: Carbon fibre reinforced composites are widely used in various industries due to their excellent strengthto-weight ratio and stiffness properties. However, one of the major issues in these composites is delamination, which occurs due to the weak interlaminar bonding between the layers of fibers and matrix. Delamination leads to a reduction in the load-carrying capacity and structural integrity of the composite. To address this issue, several advanced techniques for delamination toughening …
Published in International Journal of Composite and Constituent Materials · Vol. 8, Issue 2, 2022 · pp. 49–55 Read article
-
Optimization of Process Parameters of GMAW for Penetration, Toughness and Tensile Strength by using Taguchi Method
Abstract: Aluminum and its alloys are having variety of applications in Aircraft, food processing etc. Moreover; the use of Aluminum and its alloys are increasing day by day due to its specific properties, like light weight, high strength, and excellent corrosion resistance. However; the present study is planned to analyze and optimize the aluminum weld joint characteristics like tensile strength, penetration and toughness by using Gas Metal arc welding (GMAW) welding. …
Published in International Journal of Mechanics and Design · Vol. 5, Issue 1, 2019 · pp. 1–9 Read article
-
Effect of Nano-Fillers on the Mechanical and Fracture Behavior of Polymer Composite Matrices: A Review
Abstract: The modification of polymer composite matrices through the incorporation of nano-scale fillers has become a prominent and highly effective strategy for enhancing mechanical performance, stiffness, and fracture resistance. Unlike conventional micro-scale reinforcements, nano-fillers possess exceptionally high surface area–to–volume ratios and unique physicochemical characteristics that significantly influence interfacial phenomena within the polymer matrix. Materials, such as carbon nanotubes (CNTs), graphene nanoplatelets (GNPs), nano-silica, and layered silicate nanoclays, introduce advanced toughening mechanisms …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 1, 2026 · pp. 31–36 Read article
-
Emerging Trend of Rubber and Polymer Nano-composites
Abstract: This review is a description of rubber and polymer constituted forms to enhance desirable properties. Fibre reinforced thermo-setting polymers are constituted from fabrics in polymer, which cross linked matrix has stiff and tough properties after addition of another constitutive. Electrical stress originating in hot spots has removed after use of proper nano filler in place of two type coats on electrical cables. Increasing performance oriented properties have subjected additional descriptive, …
Published in International Journal of Applied Nanotechnology · Vol. 7, Issue 1, 2021 · pp. 9–17 Read article
-
Advanced Magnesium-Based Metallic GlassComposites for Biomedical Implant Applications: AMachine-Learning-Informed Approach
Abstract: Magnesium-based bulk metallic glasses (Mg-BMGs) combine strength, low density, and tunable degradability. Their amorphous matrix has a small plastic process zone. This zone is only about 4 μm wide. A small process zone keeps most glasses brittle. Adding a second phase is the best fix. This chapter extends Mg-BMGs to true composites. We call these Mg-based bulk metallic glass composites, or Mg- BMGCs. The chapter covers matrix engineering and interfacial …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 2, 2026 · pp. 48–65 Read article
-
Study of Mechanical Properties of Aluminum Nanocomposites using Auto Ignition Technique
Abstract: Al2O3 - high ZrO2 nanocomposite was synthesized by auto-ignition technique using metal nitrate and citric acid with a ratio of citrate: nitrate equal to 1:1.5. The precursor zirconium oxynitrite was derived from precipitation of zirconium oxycloride followed by dissolution of gel in nitric acid. The thermal decomposition behaviour of the gel was studied in order to study the decomposition behaviour and to determine the crystallization temperature. The effect of calcination …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 3, Issue 2, 2017 · pp. 36–42 Read article
-
A Review on Steel Metallurgy
Abstract: Steel is mostly manufactured in the manufacturing industries and it is nearly ninety percent due to its extremely higher strength and high toughness. This review paper discusses on the classification of steels, steel as a potential engineering material, mechanical properties and fabrication properties of steels. It also explains on its applications, low alloy steels groups and its properties. This review article also discusses on special steels like micro alloyed steels, …
Published in International Journal of Manufacturing and Materials Processing · Vol. 10, Issue 1, 2024 · pp. 1–6 Read article
-
Photosynthesis at high altitude: A case study in Trans Himalayan region
Abstract: Photosynthesis is the basis of life on earth that converts light energy into chemical energy and is the primary component of crop yield. Significant increase in crop yield by enhancing photosynthesis can answer to global food security. With the increase in population size and limited land availability, efforts have been made to grow crops in tough terrains like high altitude areas. As one ascends a mountain, environmental conditions such as …
Published in International Journal of Plant Biotechnology · Vol. 2, Issue 2, 2016 · pp. 25–34 Read article
-
Impact of Annealing on Structural and Surface Properties of Nanostructured ZnO Thin Films
Abstract: ZnO thin movies with various grain size were developed on undefined quartz substrate utilizing turn covering technique. We have announced the impact of toughening temperatures on the basic and surface properties of ZnO thin movies. The surface properties were described by AFM. From XRD investigation, it can be seen that the FWHM diminishes with an expansion in strengthening temperature from 500 to 575ºC which is reflected in the expansion in …
Published in International Journal of Applied Nanotechnology · Vol. 3, Issue 1, 2017 · pp. 33–37 Read article
-
Experimental Investigation To Study the Effect of Heat Treatment on Mechanical Properties and Microstructure of Duplex Stainless Steel
Abstract: The broad aim of this paper is to study the enhancement in mechanical properties of duplex steel by thermomechanical processing. Solution annealing followed by water quenching, hot rolling to 10% and 30%, cryo-rolling to 80% and 90% and ageing at 600°C and 1000°C for 5 hrs were the treatments given. The cryo-rolled samples were used for impact testing and rest for tensile testing. Microstructural analysis was done after the various …
Published in International Journal of Mechanics and Design · Vol. 2, Issue 2, 2016 · pp. 32–42 Read article
-
High Strength Concrete (M40) Using Micro Silica and Steel Fiber
Abstract: Abstract: This experimental study examines the combined effects of micro silica (silica fume, SF) as a partial cement replacement and hooked-end steel fibers on the mechanical properties of M40 grade concrete. Concrete mixes were designed as per IS:10262 with a target characteristic compressive strength of 40 MPa. Silica fume was incorporated at 0%, 5%, 10%, and 12% by weight of cement, while steel fibers (aspect ratio ~50) were added at …
Published in International Journal of Construction Engineering and Planning · Vol. 12, Issue 1, 2026 · pp. 53–57 Read article
-
Enhancing the strength and flexibility of crowns and bridges: advances in materials, design, and nanotechnology.
Abstract: The continuous advancement in restorative dentistry has led to the integration of nanotechnology in the fabrication of crowns and bridges, significantly enhancing their mechanical and functional performance. Nano-enhanced materials, including nanoparticle-reinforced resin matrices, nanostructured ceramics, and nano-modified adhesive systems, demonstrate superior properties compared to conventional materials. These improvements are largely attributed to the uniform dispersion of nanoparticles, which enhances filler–matrix bonding, increases surface interaction, and reduces microstructural defects, resulting in …
Published in International journal of Nanobiotechnology · Vol. 12, Issue 1, 2026 · pp. 34–42 Read article
-
A Comprehensive Review of Metal Matrix Composites (MMCs)
Abstract: Abstract Metal Matrix Composites (MMCs) combine metallic matrices with reinforcing phases (ceramics, intermetallics, fibers, or particles) to achieve superior mechanical, thermal, and tribological properties compared with monolithic metals. This review surveys fabrication routes, reinforcement types, microstructural characteristics, mechanical and tribological behavior, machining challenges, applications across aerospace, automotive, electronics, and future directions including additive manufacturing, in-situ MMCs, and data-driven materials design. Critical challenges such as interface control, scalability, cost, and machinability …
Published in International Journal of Manufacturing and Materials Processing · Vol. 11, Issue 2, 2025 · pp. 1–5 Read article
-
Microstructure and Mechanical Behavior of Microalloyed Forging Steels
Abstract: The microalloyed (MA) forging steels have been developed over the past several decades and they are gradually employed in the high-performance applications in many structural, automotive, and numerous engineering applications. The principle of microalloying contents in the Fe–C alloy system, thereby preferably combined with different mechanical, heat treatment, and microalloying solubility control the precipitation behaviors that lead to enormous opportunities to develop a new generation of high strength low alloy …
Published in International Journal of Metallurgy and Alloys · Vol. 11, Issue 2, 2025 · pp. 1–14 Read article
-
Nanocomposites – Enhancing Mechanical Properties Through Nanoengineering
Abstract: Nanocomposites represent a groundbreaking development in material science, leveraging the unique properties of nanoscale reinforcements to revolutionize the performance of traditional composite materials. By integrating nanomaterials, such as carbon nanotubes, graphene, nanoclays, and metal nanoparticles into a polymer, ceramic, or metal matrix, nanocomposites exhibit significantly enhanced mechanical properties, including improved strength, toughness, and durability. These improvements arise from superior interfacial interactions, efficient load transfer mechanisms, and increased resistance to mechanical …
Published in International Journal of Composite and Constituent Materials · Vol. 11, Issue 1, 2025 · pp. 46–52 Read article
-
An Analysis of the Mechanical Properties of Polyethylene Composites Reinforced with Short Vetiver Fibers
Abstract: Synthetic fibers (such as carbon, glass, ceramic fibers, etc.) are a cause of environmental concern, so natural fibers (such as vetiver, calotropis gigantea, flax, hemp, jute, etc.) are extensively used. In this study, the compression molding process was used to improve low-density polyethylene (LDPE) matrix composites reinforced with vetiver fiber (VF). Experiments were conducted by varying VF length, VF content, and fiber treatment time. The composites' static mechanical characteristics, including …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 1, 2025 · pp. 1–13 Read article
-
Emission Control Technologies for Reduction of NOx and Particulate Matter from Automotive Diesel Engines
Abstract: In consequence of their efficiency and torque, diesel engines have long been valued, especially for heavy-duty applications. But worries about their emissions—especially those of nitrogen oxides (NOx) and particulate matter (PM)—have prompted stricter laws all around the world. Modern emission control technologies for lowering NOx and PM emissions from automotive diesel engines are reviewed in this paper. There is discussion of several methods, such as diesel particulate filters (DPF), selective …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 10, Issue 1, 2024 · pp. 1–6 Read article
-
Applications of Building Information Modeling in Sustainability
Abstract: This paper aims to explore BIM (Building Information Modeling) applications in sustainable building constructions. Green business, green buildings and green is the buss word for developmental economics. In response to the global warming, the shortage of energy resources, and the challenges of environmental degradation, humans are trying to build low-carbon Eco-cities and to popularize low-carbon green buildings.Going green is a costlier process and requires strategic management from very basics of …
Published in International Journal of Sustainable Building Technology · Vol. 3, Issue 2, 2020 · pp. 1–11 Read article
-
Nutricosmetics from plants
Abstract: In this work, the importance of chemicals in skin well-being and arrival is widely explained and described. Nutri-cosmetics merchandises or components of ordinary beauty. Nutricosmetics is modern development within the magnificence industry. Their propensity quickly received many supporters because customers are more cautious with the supplements they are familiar are cumulative request natural ingredients right to modify one's health plush beauty deprived of bad effects or important purchase before use. …
Published in International Journal of Plant Biotechnology · Vol. 9, Issue 1, 2023 · pp. 1–14 Read article