Search
23 articles for “blast furnace slag”
-
Effect of Replacing Rice Husk Ash with Cement and Granulated Blast Furnace Slag with Fine Aggregates on High Performance Concrete
Abstract: Cement and sand are the basic materials for any concrete construction. Now a day’s due to erosion of rivers and considering environmental issues, there is a scarcity of river sand. Many researchers are finding different materials to replace sand and one of the major materials considered in this study is granulated blast furnace slag (GBFS). In recent times, instead of cement many alternative materials are being used as the binding …
Published in International Journal of Concrete Technology · Vol. 2, Issue 2, 2016 · pp. 30–35 Read article
-
Regration Analysis of Compressive Strength of Recycled Aggregate Concrete with Ground Granulated Blast-Furnace Slag and Fly Ash
Abstract: In this research work presents the compressive strength of recycled aggregate concrete (RAC) with recycled coarse aggregate (RCA) that coming from single source and the results of an investigation on the influence of recycled coarse aggregate (RCA) on compressive strength of recycled concrete are accessible. Natural aggregates concrete cubes were cured in normal water for 28-days obtain virgin and RCA. The properties of natural coarse aggregate (NCA) and (RCA) and …
Published in International Journal of Concrete Technology · Vol. 8, Issue 1, 2022 · pp. 9–16 Read article
-
Utilizing Ground Granulated Blast Furnace Slag (GGBS)as a Partial Substitute for Cement in Concrete
Abstract: Abstract Concrete is a critical material in civil engineering, valued for its strength and durability. However, the increasing demand for concrete, driven by rapid urbanization, has raised environmental concerns.Cement, a primary component of concrete, is a significant source of carbon dioxide emissions duringits production, contributing to climate change and environmental degradation. This study investigatesa sustainable alternative to traditional cement by partially replacing it with Ground Granulated BlastFurnace Slag (GGBS), an …
Published in International Journal of Concrete Technology · Vol. 11, Issue 1, 2025 · pp. 28–33 Read article
-
Revolutionizing Glass Science: Analyzing the Crystallization Dynamics of Economical Glass-Ceramic Compositions
Abstract: The development of glass-ceramics presents an innovative approach to material science, leveraging the unique properties of non-crystalline glass combined with controlled crystallization. This study investigates the crystallization dynamics of economical glass-ceramic compositions derived from raw materials, such as blast furnace slag and granite rock. We explore the fabrication processes, examining the influence of these raw materials on microstructural interlocking and phase composition. Our findings reveal that specific ratios of slag …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 10, Issue 2, 2025 · pp. 9–15 Read article
-
Compressive Strength, Water Absorption and Temperature Effects on Partial Replacing Cement with GGBS, Micro Silica and Fly Ash
Abstract: Widespread research work for decades also in development throughout the globe in concrete technology in finding substitute materials which can incompletely change Pozzolonic Portland Cement (PPC) and which can also meet the necessities of the strength and durability performance of industrial by products like micro silica, ground granulated blast furnace slag, fly ash, etc. now termed as complimentary cementations materials (CCM) are quite promising. The increased quest for sustainable and …
Published in International Journal of Construction Engineering and Planning · Vol. 4, Issue 2, 2018 · pp. 30–37 Read article
-
Influence of GGBFS on the Mechanical Properties of the Water Cured Fly Ash Aggregate-Based Geopolymer Concrete
Abstract: Abstract Conventional concrete consists of cement, sand as fine aggregate and gravel, limestone or granite in various sizes and shapes as coarse aggregate including with water. In the present work, the feasibility of using industrial inorganic polymeric residues wastes as a total (100%) replacement to the traditionally used normal conventional concrete materials is examined in the preparation of the geopolymer concrete (GPC). In this GPC, the cement is totally replaced …
Published in International Journal of Concrete Technology · Vol. 2, Issue 1, 2016 · pp. 54–64 Read article
-
Review on the Performance of Fibre and Industrial Slag in Concrete
Abstract: This review paper discusses about the different types of fibre used in concrete at different periods with the mix parameter details. This review enlightens the effect of industrial waste such as Bottom ash, Copper slag, Ferro-chromium slag, Ground granulated blast furnace slag (GGBFS), Steel slag, Stainless steel slag as a substitute in concrete. The elaborate study on its chemical composition and also the merits and demerits of using the slag …
Published in International Journal of Concrete Technology · Vol. 1, Issue 1, 2015 · pp. 16–30 Read article
-
Mechanical Properties of sand blasting residue concrete
Abstract: Sand Blasting Residue (SBR) form chain manufacturing companies as a large massive by-product. Steel-slag hydrated matrix is made of ground granulated blast furnace slag powder & steel-making slag which is the by-product of iron manufacturing. This type of construction material is called environmental conscious material in Japan. This research presented that the strength of steel-slag hydrated matrix depends on the pH of the steel-slag hydrated matrix after mixing. Firstly, cement, …
Published in International Journal of Concrete Technology · Vol. 6, Issue 2, 2020 · pp. 46–52 Read article
-
Studies on Preparation of Tiles from Slag
Abstract: This article is the study of issued forms for advanced ceramics manufacture from proportioned waste slag from iron and steel manufacture. Huge slag disposal has linked waste landfill originated pollution and loss of flora and fauna in the area, henceforth subjected reuse/recycle slag for useful purposes. Tile/shaped piece is made of glass-ceramics, in which slag (partly amorphous) is added in proportion to reduce a huge load of usual raw material …
Published in International Journal of Chemical Engineering and Processing · Vol. 7, Issue 1, 2021 · pp. 25–35 Read article
-
Influence of GGBFS Content and Curing Methods on the Compressive Strength of Coconut Shell Concrete: A Mix Design Approach for Sustainable Construction
Abstract: AbstractThis study explores the development of a coconut shell concrete (CSC) mix design using theACI211.298 guidelines, targeting a compressive strength of 20 MPa for structural applications. Dueto the organic and flaky properties of coconut shell (CS), achieving the initial target strength of 40MPa was challenging, necessitating a focus on optimizing mix proportions for a 20 MPa goal. Theresearch investigates three different mixes with varying percentages of ground granulated blastfurnace slag …
Published in International Journal of Structural Engineering and Analysis · Vol. 10, Issue 2, 2024 · pp. 9–14 Read article
-
Enhancing Compressive Strength of Geopolymer Concrete with Micro and Macro Steel Fibers: A Study on Fiber-Reinforced Geopolymers
Abstract: AbstractThis research investigates the impact of micro and macro steel fibers on the compressive strength ofgeopolymer concrete (GPC). The study utilizes locally sourced materials, including river sand,granite aggregates, fly ash, and ground granulated blast furnace slag (GGBS) in a 50:50 ratio asalumino-silicate materials. Sodium hydroxide (NaOH) and sodium silicate (Na₂SiO₃) were employedas activators, with the addition of a superplasticizer (Conplast SP430) to enhance workability. FourGPC mixes were analyzed: GPC without …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 10, Issue 2, 2024 · pp. 15–20 Read article
-
Performance Evaluation of Geopolymer Masonry Units Using Fly Ash and GGBFS: Dimensionality, Density, Water Absorption, and Compressive Strength Analysis
Abstract: AbstractThis study investigates the production, properties, and performance of geopolymer masonry units,utilizing Class F fly ash and Ground Granulated Blast Furnace Slag (GGBFS) as primary binders.These binders were activated using an 8M alkaline solution, with the materials mixed alongsidemanufactured sand (M-sand) as the fine aggregate. The binder-to-aggregate ratio was maintained at1:1, while the alkaline solution-to-binder ratio was kept at 0.2. Various geopolymer masonry units,including geopolymer bricks (GPB), solid blocks (GPSB), …
Published in International Journal of Construction Engineering and Planning · Vol. 10, Issue 2, 2024 · pp. 26–32 Read article
-
Effect of Different Mix Compositions on Compressed Stabilized Earth Block Strength
Abstract: Climate change and global warming are pressing issues exacerbated by the rapid expansion of theworld's population and its housing needs. Traditional construction materials contribute significantly toenvironmental degradation through the generation of dust, solid waste, hazardous gases, and highenergy consumption. In response, this study focuses on exploring environmentally sustainablealternatives, with a particular emphasis on compressed stabilized earth blocks (CSEB). CSEBs aremasonry units formed by compacting soil, stabilizers, and water. This research …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 10, Issue 1, 2024 · pp. 33–43 Read article
-
Advancements in Geopolymer Concrete: Formulation Optimization, Strength Characteristics, and Sustainable Applications
Abstract: This research explores the optimization of Geopolymer Concrete (GPC) formulations by investigating the mix proportions of fly ash, fine aggregate, and coarse aggregate. The study focuses on enhancing early strength properties and delves into the complex geopolymerization mechanism, unraveling the unique contributions of each constituent material. Additionally, the research systematically evaluates the strength characteristics of GPC incorporating Fly Ash (FA) and Ground Granulated Blast Furnace Slag (GGBS), providing insights into …
Published in International Journal of Construction Engineering and Planning · Vol. 10, Issue 1, 2024 · pp. 1–6 Read article
-
EXPERIMENTAL INVESTIGATION ON GEOPOLYMER CONCRETE
Abstract: The project report entitled “Experimental investigation on alkali activated concrete” describes the detailed experimental work carried out on Alkali Activated Alumina-silicate concrete [Provis and Deventer, 2009]. The fly ash- Ground Granulated Blast Furnace Slag (GGBFS) based Alkali Activated Alumina-silicate concrete cured at ambient temperature was prepared by using different molarities of Alkali Activated solution namely 8M, 12M and 16M. The properties of concrete such as workability, compressive strength, Pull-out test/bond …
Published in International Journal of Concrete Technology · Vol. 2, Issue 2, 2016 · pp. 17–22 Read article
-
Performance of Metakaolin and GGBS-induced Geopolymer Concrete Under Compression
Abstract: Metakaolin and ground granulated blast furnace slag (GGBS) were used as the source materials to obtain the high strength geopolymer concrete. NaOH and sodium silicate were used as alkaline activators with varying NaOH molarities of 8M, 12M, 14M and 16M. Cubes of size (100x100x100) mm were cast and the four geopolymer mixes were heat cured for varying durations of 24 hours, 48 hours and 72 hours and tested for compressive …
Published in International Journal of Concrete Technology · Vol. 3, Issue 2, 2017 · pp. 31–38 Read article
-
Suitability of Concrete Containing Fly Ash Along with Alccofine
Abstract: With the growing urbanization and rising standard of living and purchasing power of men the demand of concrete does not look to become dormant. But due to limited supply of non-renewable constituents of concrete they are needed to be preserved for the future generation, so there is utmost necessity of using supplementary waste materials in concrete. With advancement in science and technology itis made possible that the waste materials like …
Published in International Journal of Concrete Technology · Vol. 4, Issue 1, 2018 · pp. 15–20 Read article
-
Effect of Accelerated Curing and Normal Curing Regimes on UFGGBFS-Based Semi-Lightweight Concrete
Abstract: This paper deals with the performance of semi-lightweight concrete (sLWC), prepared by using calcite powder pellets as coarse aggregates which was improved by partial replacement of cement with UFGGBFS (ultrafine ground granulated blast-furnace slag). Cement could be replaced by UFGGBFS as 0%, 5%, 10%, 15%, 20%, 25%, 30%, 35%, 40%, 45%, 50%, 55%, 60%, 65%, and 70% to enhance the strength and durability properties of concrete. High-range water-reducing admixtures (HRWA) …
Published in International Journal of Concrete Technology · Vol. 5, Issue 1, 2019 · pp. 1–7 Read article
-
Durability Studies on Red mud and GGBS based Geopolymer Concrete
Abstract: The aim of the study is to evaluate the performance of geopolymer concrete and conventional concrete. In the present work, two Industrial by-products such as Red Mud and ground granulated blast furnace slag (GGBS) of 25:75 proportion is used for geopolymerisation. Red mud is a by-product from Alumina industry. GGBS is a by-product from iron industry. To develop a bond between binder and aggregates to form a geopolymer concrete feldspar …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 5, Issue 1, 2019 · pp. 9–17 Read article
-
Experimental Investigation On Replacement Of Fine Aggregate With Manufactured Sand And Partial Replacement Of Cement With Ggbs
Abstract: Concrete is the most widely used construction material in civil engineering industry because of its high structural strength and stability. The concrete industry is looking for supplementary cementitious material or industrial by product with the objective of reducing the carbon dioxide emission which is harmful to environment. Ground granulated blast furnace slag (GGBS) is the solid wastes generated by industry are used as a replacement material for cement. Manufactured sand …
Published in International Journal of Structural Engineering and Analysis · Vol. 4, Issue 2, 2018 · pp. 1–6 Read article