Search
10 articles for “compressive strain”
-
Maximizing Void Properties from Optimized Local Pozzolans in Wearing Course of Bituminous Concrete Mixtures
Abstract: Failure of asphalt pavement has influenced research into better ways to optimize local pozzolans seenas waste and reduce cost of importation of admixtures. Waste Shell Ashes are checked as localassembled by incorporating them in asphalt concrete mix design. Different research has shown thatsome agricultural waste/by-products can be admitted as mineral fillers in hot-mix asphalt concrete toobtain certain desirable properties. It is on this basis that this research attempts to interrogate …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 7, Issue 2, 2021 · pp. 47–54 Read article
-
Analytical Modeling of Brick–Mortar Couplet
Abstract: This paper is a presentation of the finite element modeling of stress in a brick–mortar couplet. The brick–mortar couplet here serves as a meaningful substitute for a brick wall structure. In this work, the basic steps in derivation of the element stiffness matrix for a plane stress problem using the displacement approach are presented. The main purpose in the work is to verify the nodal displacements, which in turn would …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 6, Issue 1, 2020 · pp. 5–13 Read article
-
MODAL ANALYSIS OF CONVENTIONAL RCC STRUCTURE WITH STEEL BRACING
Abstract: It is a well-known fact that high rise reinforced structures are vulnerable to lateral loadings from things like earthquake and wind stresses. Bracing systems have the excellent benefit of adding just a tiny amount of bulk to the structure while significantly enhancing its performance. Building modelling is done both with and without a bracing system in this study. Analysis that is both linear and dynamic is being done. The structure …
Published in International Journal of Structural Engineering and Analysis · Vol. 9, Issue 1, 2023 · pp. 48–62 Read article
-
Study the effect of lubrication on hardness in the ring compression test
Abstract: Mild Steel is commonly used to produce automotive parts such as shafts, gears and bearings. This paper focuses on the hardness distribution in the mild steel ring specimen after compress under rigid dies. Three different types of lubricants namely boric acid, Vaseline, grease and dry condition were employed as lubricants and the coefficient of friction corresponding to the lubricant evaluated using standard ‘Ring compression test’. The strain distributions obtained from …
Published in International Journal of Manufacturing and Materials Processing · Vol. 5, Issue 2, 2019 · pp. 18–27 Read article
-
Compressive Strength and Chloride penetration on Semi-Lightweight Concrete Made Up of Artificial Aggregates
Abstract: This paper deals with the properties of semi-Light weight concrete prepared by using Light weight wood ash pellets as coarse aggregates. It can be prepared by varying the cement content from 300 to 450 kg/m3. Optimum design mix can be finalised by studying the engineering properties such as compressive strength, split tensile strength, young’s modulus and rapid chloride penetration test. Various trial mixes have been attempted in the laboratory by …
Published in International Journal of Concrete Technology · Vol. 9, Issue 2, 2023 · pp. 14–25 Read article
-
Experimental Investigation on Axially Loaded AASC and TVC Square Columns
Abstract: In this present project, an experimental investigation was carried out to study the behaviour of alkali-activated slag concrete (AASC) and traditionally vibrated concrete (TVC) columns under axial loading. The dimensions of the columns were 150 mm × 150 mm × 1219 mm to mimic the short column behaviour. The longitudinal steel ratio was varied for the specimens. Different criteria such as load deformation behaviour, compression stiffness and surface strain were …
Published in International Journal of Structural Engineering and Analysis · Vol. 5, Issue 1, 2019 · pp. 8–17 Read article
-
Advanced Magnesium-Based Metallic GlassComposites for Biomedical Implant Applications: AMachine-Learning-Informed Approach
Abstract: Magnesium-based bulk metallic glasses (Mg-BMGs) combine strength, low density, and tunable degradability. Their amorphous matrix has a small plastic process zone. This zone is only about 4 μm wide. A small process zone keeps most glasses brittle. Adding a second phase is the best fix. This chapter extends Mg-BMGs to true composites. We call these Mg-based bulk metallic glass composites, or Mg- BMGCs. The chapter covers matrix engineering and interfacial …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 2, 2026 · pp. 48–65 Read article
-
Stress Paths in Undrained Triaxial Tests with Anisotropic Consolidation on Marine Sediments of Southern Italy
Abstract: The present document is the first paper of a serial of studies ongoing in geotechnical laboratory testing and in situ testing of marine sediments in the southern Italy coastal area. For this first stage, Undrained triaxial compression tests with anisotropic consolidation (CK0U) have been performed on marine sediments collected in boreholes carried out in the seabed, in a depth of 8 m to 18 m below the seabed. The use …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 8, Issue 1, 2022 · pp. 37–42 Read article
-
A Survey on Hydrogen Storage System using Alloys
Abstract: The transition to a carbon-neutral energy landscape hinges on the ability to store hydrogen safely, densely, and reversibly. While high-pressure tanks and cryogenic vessels dominate today’s infrastructure, solid-state storage in metallic alloys offers a compelling alternative by marrying high gravimetric capacity with intrinsic safety. This work presents a systematic investigation of a family of reversible hydrogen-absorbing alloys—principally Mg-based intermetallics (Mg₂Ni, Mg-Fe-Mn) and Ti-V-based Laves phases (TiFe, Ti₁₋ₓMnₓV₂) – engineered through …
Published in International Journal of Energetic Materials · Vol. 12, Issue 1, 2026 · pp. 13–19 Read article
-
DETAILED STUDY ON THE PROPERTIES OF PLASTIC CONCRETE CUTOFF WALL MATERIALS MIXED WITH WATERPROOFING ADMIXTURES
Abstract: This study presents the results of a comprehensive experimental work performed to characterize the mechanical and hydraulic properties of plastic concrete materials added with water-resisting and crystalline admixture as Permeability Reducing Admixture for Hydrostatic conditions (PRAH). The mechanical properties, deformation, permeability nature, triaxial stress-strain curve, hydration products, phase composition, and pore structure of plastic concrete with various proportions of PRAH were investigated. In addition to that, retarding admixture was used …
Published in International Journal of Concrete Technology · Vol. 9, Issue 1, 2023 · pp. 1–15 Read article