Search
17 articles for “epoxy resin”
-
Influence of Surface Treatments on the Adhesion of Plant Fibers to Epoxy Resin
Abstract: Because of their primary benefits, moderate strength and stiffness, low cost, and the fact that they are a renewable, biodegradable, and environmentally safe material, natural fibers are seen to have potential use as reinforcing agents in polymer composite materials. Since they are inherently hydrophilic, moisture can easily build up on them, weakening or plasticizing the fibers’ adhesion to the surrounding matrix and affecting the performance of composite materials used in …
Published in International Journal of Agrochemistry · Vol. 11, Issue 1, 2025 · pp. 12–24 Read article
-
Experimental Study on Mechanical Properties of E-glass Fiber and Epoxy Resin Hybrid Composite Material
Abstract: Hybrid composites occupying the area of standard materials by satisfying the necessities of various sectors like part industries, automobile industries, ship building and numerous bio-medical sectors. the most reason to substitute standard materials is that the hybrid composites giving same or additional needed properties with less weight and value than standard materials and most output in minimal consumption with higher lifespan to seek out the economical suggests that of utilizing …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 1, 2021 · pp. 20–36 Read article
-
Influence of Concentration Variation of Chemical Pre Treatments on Tensile Properties of Coir Fibre Reinforced Composites
Abstract: Composite material consisting randomly oriented coir fibres and epoxy resin have been studied. This study tends to analyze the tensile properties of coir fibre (10mm length) reinforced with epoxy resin by treating with Na0H and KMn04 of different concentrations. Fibers are bonded together with epoxy resin by hand layup process and cured at room temperature for 24 hours to form composite. Different tensile properties of composite were investigated in accordance …
Published in International Journal of Composite and Constituent Materials · Vol. 4, Issue 2, 2018 · pp. 13–20 Read article
-
SYNTHESIS AND CHARACTERISATION OF NATURAL FIBRE REINFORCED EPOXY COMPOSITES BASED ON SESAME OIL
Abstract: ABSTRACT Epoxy sheet and its composites were obtained by epoxidised resin and coir fibres respectively. Epoxidisedresin were prepared by condensing sesame oil using hydrogen peroxide and glacial acetic acid as catalyst. The resin was characterisedby spectral studies such as FT-IR and Solvent Absorptivity Percentage of Epoxy Resin and its Composites.The epoxy composites have higher solvent absorptivity percentage in the solvents when compared to that of epoxy resin. The epoxy composites …
Published in International Journal of Polymer Science and Engineering · Vol. 5, Issue 1, 2019 · pp. 38–40 Read article
-
Sustainable Cementitious Composites withEpoxy–Alccofine Synergy
Abstract: This research examines the combined influence of epoxy resin and Alccofine when used as partial substitutes for cement in producing sustainable, high-performance concrete. The study aims to improve both strength and durability properties while simultaneously reducing cement usage and its environmental impact. Concrete mixes were prepared with epoxy resin contents of 0%, 5%, and 10% by weight of cement, along with Alccofine replacement levels of 5%, 10%, and 15%. The …
Published in International Journal of Concrete Technology · Vol. 12, Issue 2, 2026 · pp. 1–12 Read article
-
Experimental verification of strength of glass fiber reinforced polymer matrix composites
Abstract: An experimental investigation has been carried out to develop a new PMC (Polymer Matrix Composite) using commercially available Epoxy and Polyurethane resin systems. These resin systems would be reinforced with glass fibers, filler materials and aluminium foils. The laminates have been prepared by using the hand lay-up technique for eight layers and the mechanical tests such as tensile and compression test have been conducted for the PMC. This work has …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 3, Issue 1, 2017 · pp. 43–51 Read article
-
A-Survey on Natural Fibers
Abstract: In the last thirty years of composite materials, ceramics and plastics have been important emerging materials. The number of application of composite materials has been grown consistently, penetrating and winning new market requirement continuously. The composite materials forms a significant proportion of the engineered materials their worth as weight saving materials; the present aim is to make them as cost effective. This survey paper discuss about worldwide collection of natural …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 1, 2020 · pp. 17–28 Read article
-
MWCNT AND GRAPHENE FOR IMPROVED CORROSION RESISTANCE OF MILD STEEL
Abstract: ABSTRACTThe protective coating method is a passive corrosion protection technique. The protective coating detaches the metallic surfaces from the aggressive media, such as moisture, salts, acids etc. Nanotechnology is a relatively modern development in scientific research, the development of this concept occurred over a very short period of time. One technique that has recently been used to increase the adhesive and anti-corrosive properties of polymer coatings is the addition of …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 2, 2020 · pp. 12–17 Read article
-
Mechanical Behavior and Model Fitness of the Natural Fiber Composite: A Study on Orange Peel and Charcoal Composite
Abstract: In this paper, orange peel with charcoal in addition with epoxy resin composite is tested for the behavior of mechanical properties. The results depicted that the best hardness, thickness, tractable flexural are getting for the material organized with the 20 % of weight sustained orange strip epoxy composite. The obtained results were also tested for regression analysis for validate the experimental data for assessment of model fitness. Keywords: natural composite …
Published in International Journal of Composite Materials and Matrices · Vol. 4, Issue 2, 2018 · pp. 33–42 Read article
-
Analysis of Mechanical Attributes of Nano clay Reinforced Polymer Composites
Abstract: Composite material provide a Higher and unique mechanical and physical attributes because of its combines the most unique attributes of its composition while underlying their least advantageous attributes . Composites have been widely used in various application starting from aerospace , Manufacturing plants , Electrical equipment's , Marine , Automotive ,Civil Infrastructure , Corrosive Environment’s ,Whereas the Epoxy which are the cured components of two chemical functional group namely polyepoxides …
Published in International Journal of Manufacturing and Materials Processing · Vol. 7, Issue 1, 2021 Read article
-
Strain-based Fatigue Test of Woven Glass-Epoxy Fabric Composites
Abstract: Strain based fatigue testing of Glass-Epoxy Composite Material in Tension-Tension loading is carried out by using positive load method to evaluate potential crack propagation, fiber fractures, de-laminations, etc. Through continuous stressing in the material, evaluation of life cycle capabilities of glass fiber composites are found which is essential for Research Development, Structural Design, Quality assurance, Modeling and finally Material Specifications. By using an epoxy resin with glass fiber prepared in …
Published in International Journal of Construction Engineering and Planning · Vol. 5, Issue 1, 2019 · pp. 39–55 Read article
-
Experimental Optimization of Process Parameters for Tape Wound Composite Cylindrical Shells by using Taguchi Method
Abstract: The purpose of this paper is to design and construct laminated composite cylindrical shells. Tape wound layup method is implemented for the preparation of composite laminated shells by E-glass fiber mat and Epoxy resin as adhesive. The shells were made by considering two parameters p1-diameter of mandrel and parameter p2- stacking sequence. As per the L9 orthogonal array the required diameter and stacking sequence was arranged. The composite shells were …
Published in International Journal of Composite Materials and Matrices · Vol. 5, Issue 2, 2019 · pp. 18–26 Read article
-
The advanced composite materials production by new method using the process of vibro-turbulization
Abstract: Typically, the methods of composite materials production, such as epoxy bases, include preparing a binder by mixing a hardener, a solvent and an epoxy resin, infusing a fibrous or powder filler with a binder, and hardening by heating under pressure. These methods do not permit to reach the main goal of the production of advanced composite materials with a basis (matrix) filled by uniformly dvistributed fibrous or powder filler (armoured …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 1, 2020 · pp. 1–4 Read article
-
A Study on Evaluation of Mechanical Properties of Reinforced Composite Developed Using Corn Husk and Glass Fibre
Abstract: With the increasing demand for the disposal of polymer wastes and environmental waste from agriculture/ farming, this research aims to develop composite materials by using glass fibre and corn husk fibres by hand lay-up technique. The fibre from the maize husk was extracted and then overlapped on glass fibre cloth films in regular or irregular orientations. The reinforcement is done with the epoxy resin. The reinforcement and harden matrix are …
Published in International Journal of Manufacturing and Materials Processing · Vol. 5, Issue 1, 2019 · pp. 32–36 Read article
-
Dynamic Behavior of Hybrid Unidirectional Without Cracked Composite Plate
Abstract: The composite material is one of the most common materials used in engineering applications due to the wide range of properties, high strength, cheap, easy to manufacture and lightweight. Therefore, many studies and researches have been conducted and are currently being conducted to obtain the appropriate mathematical models that describe the behavior of these materials when exposed to different types of mechanical loads. A mathematical model was built by using …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 1, 2020 · pp. 36–47 Read article
-
Development of Epoxy Based Hybrid Composite Reinforced with Jute and Glass-fiber and Effect of Silicon Carbide additive on it’s Mechanical Properties
Abstract: In this project, an effort is made to compare the improvement of the matrix material properties because of the presence of the fillers and additives. Initially, hand lay-up process was carried out in a mold of known dimensions to layup jute fibers of varying weight percentages in the epoxy matrix. Another composite with glass fibers of similar weight percentages to that of jute were laid up in epoxy matrix in …
Published in International Journal of Composite and Constituent Materials · Vol. 4, Issue 2, 2018 · pp. 8–12 Read article
-
Mechanical characterization of Fiber glass Composites with Nano silica
Abstract: Epoxy-based fiber glass composites with enhanced strength by silica Nano particles checked for mechanical strength by addition of nanoparticles. Fiber glass Composites were prepared with glass fiber and nanoparticles containing resin, by infusion method. proper mixing of nanoparticles in resin was checked by various techniques. Viscosity of liquid resin reduced because of nanoparticles but still have good command to reinforce glass fibers. glass transition temperature (Tg) of polymer containing silica …
Published in International Journal of Chemical Separation Technology · Vol. 5, Issue 1, 2019 · pp. 49–58 Read article