Search
115 articles for “gases”
-
Ability of Metallic Materials to Resist Surface Damage Induced by High-temperature Action of Air or other Gaseous Mediums
Abstract: The features of the oxide layer scale that forms on the metal's surface and limits gas penetration into the metal, limiting the growth of gaseous corrosion, influence a metal's or alloy's oxidation resistance in an oxidising atmosphere. The rise in weight of sample being tested (due to oxygen uptake by the metal) or even the weight loss after removing the scale from the sample's surface, related to a unit surface …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 1, 2022 · pp. 16–21 Read article
-
Study the Corrosive Effect of Greenhouse Gases on Metallic and Non-metallic Materials
Abstract: Carbon dioxide is a major corrosive pollutant for building materials. It enters inside materials by diffusion or osmosis process and in presence of moisture it produces H2CO3 which decrease the pH value and accelerates chemical and electrochemical reaction with building materials. The carbonation reaction produces deterioration inside and outside of building materials. It produces corrosion reaction with metallic bar and disbanding with concrete. CO2 reacts with Ca (OH)2 and Mg(OH)2 …
Published in International Journal of Metallurgy and Alloys · Vol. 7, Issue 2, 2021 · pp. 17–28 Read article
-
Enhancing the Sensing Properties of Nanosensors for Detection of Gases
Abstract: In order to improve commercial gas sensors, many approaches have attempted to modify the sensing properties of metal oxide semiconductor gas sensors in order to achieve higher sensitivity and selectivity. Enhancements of the sensing properties of MOS sensor (Metal Oxide Gas Sensors) materials can be achieved by the development of sensors with nanoscale sizes and structures, such as nanoparticles, nanowires, nanorods etc.
Published in International Journal of Nanomaterials and Nanostructures · Vol. 1, Issue 2, 2015 · pp. 42–43 Read article
-
Effects of Compressor Pressure Ratio and Combustion Chamber Exhaust Gases Temperatures on Gas Turbine Cycle Performance
Abstract: Today, we are seeing an increasing share of gas power plants in the production and supply of electricity therefore, it is essential to know the impact of different factors on the performance of these plants.The main purpose of this study is to investigate the effect of different parameters such as compressor pressure ratio and temperature of the combustion chamber on the performance of gas turbines .First, the thermodynamic relationships governing …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 6, Issue 1, 2020 · pp. 1–6 Read article
-
Kalina Cycle Thermal Analysis Using Heat Recovery Process
Abstract: It is not possible to measure very high temperature with help of physical temperature measuring probes, so in order to get temperature of flue gases, inverse heat transfer theory is applied. Measuring the temperature on outside wall of pipe from which flue gases are going out, it is possible to get calculated values of flue gases (which is not possible to get with physical probe) using inverse heat transfer analysis. …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 4, Issue 2, 2018 · pp. 39–47 Read article
-
Metal-Organic Frameworks, Synthesis, Characterization and Environmental Applications
Abstract: Clean energy gases such as H2 and CH4 are considered as promising candidates for the replacement of traditional fossil fuels. While gas storage is a difficult issue to challenge, the existence of toxic pollutant gases has posed a more thought-provoking concern. Recently, considerable research efforts have been devoted to developing metal–organic frameworks (MOFs) for the effective and energy-efficient separation, storage, or capture of the related gases. In this article, we …
Published in International Journal of Environmental Chemistry · Vol. 4, Issue 2, 2018 · pp. 29–33 Read article
-
Nanocoating and Electrospray Techniques Use to Mitigation Corrosion Sculptures
Abstract: The most sculptures of the world are created by the brass, bronze, iron, silver, gold and metalloid. They come in contact of corrosive pollutants to produce chemical, electrochemical and biochemical reactions and develop various form of corrosion like uniform corrosion, galvanic corrosion, pitting corrosion, stress corrosion and crevice corrosion. The corrosive gases CO2, NO2 and SO2 concentrations increase in atmosphere rapidly after industrialization. The major contributors of these gases are …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 2, 2022 · pp. 1–11 Read article
-
Treatment of CO2+NH3 Mixed Waste Gas from Different Sources by Blend Solvents
Abstract: The waste gas from chemical plants, including urea fertilizer plant, contains a large amount of CO2 gas in addition to NH3 gas. New solvents have been studied for use in the absorption of waste gases, but most of them are carried out at specific compositions and flow rates for individual gases. In this paper, a complete conceptual design of the process for separately absorbing CO2 and NH3 gases in a …
Published in International Journal of Chemical Separation Technology · Vol. 10, Issue 2, 2024 · pp. 1–19 Read article
-
GLOBAL WARMING AND ITS PREVENTION THROUGH BIOGAS
Abstract: The impact of global warming has drastically affected the ecosystem and also the life on earth. The main causes of global warming are the pollutant gases which are released into the atmosphere by different sources. The major one being the automobile industries followed by different wastes that are generated on a daily basis. So the gases released during the combustion or burning of wastes are responsible for global warming. The …
Published in International Journal of Environmental Chemistry · Vol. 3, Issue 2, 2017 · pp. 12–18 Read article
-
Use of Titanium as filter on chimney
Abstract: Industrial chimneys are one of the largest contributors to air pollution, releasing a wide range of harmful gases and fine particulate matter into the atmosphere. These emissions significantly degrade environmental quality and contribute to long-term public health risks such as respiratory diseases and cardiovascular complications. Traditional air pollution control devices used in industrial exhaust systems, including electrostatic precipitators and bag filters, often struggle with high operational costs, frequent maintenance, and …
Published in International Journal of Analytical and Applied Chemistry · Vol. 11, Issue 2, 2025 · pp. 120–126 Read article
-
Atmospheric Emissions in the Life Cycle of Metro Rail Transport Systems
Abstract: AbstractIn 2007, the United Nations (UN) published a comprehensive report on "Climate Change," whichhighlighted the significant impact of greenhouse gases (GHGs) on climate variations and thealarming rise in global temperatures. In response, nations were urged to devise action plans aimed atreducing the emissions of these harmful gases. Carbon dioxide (CO2) emerged as the primarygreenhouse gas, with transportation systems accounting for approximately 25% of total globalemissions, primarily driven by private vehicle …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 10, Issue 2, 2024 · pp. 1–8 Read article
-
Effects of Air Pollution on Human Health
Abstract: Fresh air is the major requirement to sustain a healthy life. Air pollution occurs when toxic gases, dust, smoke or odor are introduced into the atmosphere which makes it harmful to human, animals and plant. Both natural and human activities have the potential to pollute the air. Man is to blame for the environment's overall degradation. Globally, our atmosphere is very contaminated. Due to the expansion of industry, there has …
Published in International Journal of Analytical and Applied Chemistry · Vol. 9, Issue 1, 2023 · pp. 17–20 Read article
-
Effect of polymer architecture on the gas separation performance of PIM-1 membranes
Abstract: Molecular simulations are used to demonstrate the effects of chain architectureson the gas separation performance of PIM-1 membranes. Four different architectures(linear, H-shape, star, and dendritic) were considered to investigate the transport propertiesof four industrially relevant gases (CO2, CH4, O2, and N2). The results obtainedfor the linear PIM-1 agree well with the available experimental data. The simulationsindicate that it is indeed possible to tune the free volume morphology of PIM-1 membranesby …
Published in International Journal of Chemical Separation Technology · Vol. 6, Issue 2, 2020 · pp. 35–56 Read article
-
Utilization of Advance Geopolymer in Concrete: A Review
Abstract: Climate change has several adverse impacts like changes in weather, untimely rains, depleting water, droughts, flash floods, acute and early summer and chilling winter. Equally, another bigger challenge to the society is foul smell whether it is river, pond, drain, public toilets or garbage dump yards. It is due to emission of hydrogen sulphide, methane and other toxic gases. Methane in pure form does not create any foul smell, however …
Published in International Journal of Construction Engineering and Planning · Vol. 7, Issue 2, 2021 · pp. 21–28 Read article
-
Low temperature plasma treatment of polymeric membranes: a comparative review
Abstract: This paper presents a comparative study of plasma surface modification of various polymeric membranes. Low temperature plasma treatment using pulsed direct current discharge of different gases was employed to enhance hydrophilicity of membranes. Radio frequency discharge of various gases was used to improve surface properties of different polymeric membranes. The enhancement of hydrophilicity of the plasma modified membrane surface was evaluated by measuring the contact angle. The membranes were characterized …
Published in International Journal of Polymer Science and Engineering · Vol. 6, Issue 1, 2020 · pp. 1–19 Read article
-
The Influence of Hexanol and Methyl Acetate as Oxygenated Additives with Diesel Fuel in a Diesel Engine Generator
Abstract: Diesel engines play a vital role in all the major sectors (such as transportation and industrial) due to their high efficiency, durability, reliability and low operating cost. At the same time, they are considered as one of the biggest contributors of environmental pollution by releasing enormous amount of toxic gases to atmosphere (such as NOx, HC, CO2 and PM). Emissions from transport, especially motor vehicles, increase the level of gases …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 5, Issue 1, 2019 · pp. 1–9 Read article
-
Review On Bipolar Plate Geometric Design and Materials for Proton Exchange Membrane Fuel Cell Applications
Abstract: Abstract Bipolar plates (BPs) are vital components in proton exchange membrane fuel cells (PEMFCs), performing multiple essential functions that directly influence system efficiency, durability, and overall operational performance. They ensure uniform distribution of reactant gases across the active area, provide electrical conductivity between adjacent cells, assist in effective thermal management by dissipating heat generated during electrochemical reactions, and maintain proper sealing to prevent leakage of gases and coolant. Among these …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 11, Issue 2, 2025 · pp. 40–56 Read article
-
Review Article: Butyl and Halo-Butyl Rubbers
Abstract: Butyl and halo butyl rubbers are key raw materials for various industries due to their exceptional properties, like permeability to gases, high chemical resistance, and durability. Butyl rubber (IIR) is composed of isobutylene with small amounts of isoprene, offering a low permeability to gases, making it ideal for applications in the automotive, medical, and consumer goods. Butyl Rubber is non-polar nature and possess excellent insulation properties which further enhance its …
Published in International Journal of Polymer Science and Engineering · Vol. 11, Issue 2, 2025 Read article
-
Building a Sustainable Future Through Renewable Energy Exploration
Abstract: Climate change is one of the most pressing current challenges in terms of ecosystem stability, individual and global health and economy. The emissions of greenhouse gases due to the activities of anthropogenic origin on the combustion of fossil fuels, deforestation and other industrial processes. A renewable energy system converts the energy found in sunlight, wind, falling water, sea waves, geothermal heat or biomass, such as heat or electricity. Most of …
Published in International Journal of Environmental Chemistry · Vol. 11, Issue 1, 2025 · pp. 87–94 Read article
-
Transforming Waste Plastics Through Pyrolysis: A Sustainable Solution for Polymer Resource Recovery
Abstract: The global accumulation of plastic waste, particularly polymers like polyethylene (PE), presents amajor environmental challenge, demanding innovative solutions for effective management. This studyfocuses on the chemical process of pyrolysis as a promising approach for polymer resource recoveryand environmental sustainability. Pyrolysis involves the thermal decomposition of plastic waste intovaluable products, such as liquid fuels, gases, and solid residues. Key parameters, such as temperature,heating rate, and residence time were optimized to enhance …
Published in International Journal of Polymer Science and Engineering · Vol. 10, Issue 2, 2024 · pp. 12–19 Read article