MATLAB
7 articles · search the full text for this term
-
Smart Wastewater Treatment Plant Modeling Using ANN And ASM1 MATLAB Simulation
Abstract: Wastewater Treatment Plants (WWTPs) are necessary infrastructure for protecting the environment and public health, but modeling and predicting performance has been an ongoing challenge for engineers working within a WWTP and regulators of the environment. For many years the Activated Sludge Model No. 1 (ASM1) has been the standard for simulating biological treatment processes, but the conventional implementations in MATLAB do not provide the user-friendly interface, the predictive intelligence, or …
Published in International Journal of Chemical Engineering and Processing · Vol. 12, Issue 2, 2026 · pp. 44–62 Read article
-
Integrated Process Design and Simulation of Amine-Based CO₂ Capture: A Path to Emission Control
Abstract: The flow sheet must represent the complete process in detail taking care of all process equipment. ASPEN HYSYS simulation software was used to simulate the process, the models of the process was simulated using MATLAB. The concentration of the atmospheric CO 2 was found to having been increasing steadily and has risen up to 35% since the Industrial Revolution. This rate, at which the concentration of CO 2 is increasing, …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 11, Issue 2, 2025 Read article
-
Adaptive Clustering Strategies for 5G-IoT Wireless Sensor Networks: Insights into Neuro-Fuzzy Approaches
Abstract: The new cellular network standard is 5G. The Internet of Things, or IoT, is growing and changing quickly. Massive cellular bandwidth increases brought about by 5G make it much simpler for the Internet of Things to connect many devices. Current LTE networks will be ten times slower than 5G. This increase in speed will allow IoT devices to communicate and share data faster than ever. In this research, we have …
Published in International Journal of Microwave Engineering and Technology · Vol. 11, Issue 1, 2025 · pp. 33–55 Read article
-
Enhancement in Fuel Efficiency with Magnetised Nano Ferro Particles in Internal Combustion Engines
Abstract: The purpose of the research is to reduce the fuel consumption and increase the material life of an IC engine. The performance of an internal combustion engine can be evaluated in terms of fuel consumption by addition of nano sized ferro particles into cooling water system at varying percentage and magnetizing it with varying magnetic intensity. The experiment was undertaken in a 796 cc, 3 Cylinder petrol engine with a …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 9, Issue 1, 2023 · pp. 40–46 Read article
-
Mathematical Modeling and Simulation of Equivalent Circuit Modeling for Electric Vehicle
Abstract: Three different forms of electric vehicle modeling—Multi Scale Multi- Dimensional, Newman Tiedemann Gu and Kim, and Equivalent Circuit Model—are compared in this essay. Both battery packs and single cells can be modelled using this method. Li-ion battery. ECM was discovered to be a trustworthy solution for modelling electric vehicles. In an equivalent circuit concept, an electric circuit represents how a battery behaves. It uses an electric circuit made up of …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 9, Issue 1, 2023 · pp. 9–17 Read article
-
Conceptual design of eVTOL A Nonlinear Dynamic Model of an eVTOL on Simulink-MATLAB
Abstract: eVTOL (electric vertical take-off and landing) for urban mobility is currently evolving and manyconcepts of configurations with which vertical take-off and landing could be made possible arediscussed like a multi-copter, lift and cruise, and tilt-wing. All these concepts have different behaviorfrom the flight dynamics perspective. The one which is predominantly discussed here is the proposedmodel Cityhawk by Urban Aeronautics with a ducted fan vane control system. Urban Aeronautics hasvery high …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 7, Issue 2, 2021 · pp. 18–28 Read article
-
Finite Element Modeling of Deep Reinforced Concrete Beams with Web Openings
Abstract: The effects of openings on the ultimate capacity of deep beams have been studied experimentally by many researchers. However, there’s still need for analytical study using numerical methods and also the development of simple stiffness reduction models that can be easily used for quick prediction of the effects of opening sizes on the stiffness of deep reinforced concrete beams. This study is focused on modeling the behavior of deep reinforced …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 4, Issue 2, 2018 · pp. 22–30 Read article