All articles
544 articles
-
Wettability of carbon fibers with resin matrices from dynamic contact angle measurements
Abstract: Wettability is the property that quantifies the propensity of a solid surface (carbon fiber) to be covered by a liquid (resin). For a wettable solid, the solid-liquid contact is favoured and as a result the liquid spreads on such surface of the solid. Spreading of the liquid on the solid surface is primarily driven by the adhesive forces between the liquid and the solid, while the inter molecular cohesive forces …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 2, 2025 Read article
-
Methods for Obtaining Ozone-Resistant Rubber Based on Elastomers
Abstract: Technical Rubber products are one of the main products with the widest range of uses today. To expand the scope of RTM use, it is necessary to increase its varieties. The most demanded rubber products are rubber products with high mechanical strength in contact with ozone. In this work, several polymer mixtures were used to obtain ozone-resistant rubber products. For this purpose, ethylene propylene terpolymer, polyvinyl chloride, and butadiene-nitrile rubber …
Published in International Journal of Polymer Science and Engineering · Vol. 11, Issue 2, 2025 · pp. 1–5 Read article
-
Review Article: Butyl and Halo-Butyl Rubbers
Abstract: Butyl and halo butyl rubbers are key raw materials for various industries due to their exceptional properties, like permeability to gases, high chemical resistance, and durability. Butyl rubber (IIR) is composed of isobutylene with small amounts of isoprene, offering a low permeability to gases, making it ideal for applications in the automotive, medical, and consumer goods. Butyl Rubber is non-polar nature and possess excellent insulation properties which further enhance its …
Published in International Journal of Polymer Science and Engineering · Vol. 11, Issue 2, 2025 Read article
-
Comprehensive Review of Membrane Fouling Control Mechanisms
Abstract: One of the biggest problems with membrane-based separation procedures is membrane fouling. As particles, organic matter, microbes, and other materials build up on the membrane’s surface or inside its pores, the effectiveness of membranes – such as those used in reverse osmosis, ultrafiltration, and microfiltration – declines over time. The effectiveness and longevity of the membrane are eventually lowered because of this fouling, which causes a drop in flux and …
Published in International Journal of Polymer Science and Engineering · Vol. 11, Issue 2, 2025 · pp. 1–9 Read article
-
Optimization of Wear Parameters for Medical Implant Applications
Abstract: The purpose of the present research is to check the capability of SS 304 for the application of medical implants and describe the influence of sandblasting process, applied load, frequency, sliding distance on the coefficient of friction of SS 304. In this research, attempts have been made to study the wear behavior of SS 304 at various conditions. In the tribology lab wear test was carried out in accordance with …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 2, 2025 · pp. 1–10 Read article
-
Mechanical and Microstructure Properties of Al and SiC Reinforced Aluminum-Based Metal Matrix Composite
Abstract: It is becoming increasingly difficult to design new technical materials that are resistant to wear damage and corrosion degradation in severe service circumstances. Unfortunately, even with crucial passive metals, like Al alloys, there is often a compromise between wear and corrosion resistance. Because of the unfavorable galvanic connection between the precipitates and the matrix, precipitates not only harden the material but also accelerate corrosion. This research established that a supersaturated …
Published in International Journal of Metallurgy and Alloys · Vol. 11, Issue 1, 2025 · pp. 26–43 Read article
-
Nanocomposites – Enhancing Mechanical Properties Through Nanoengineering
Abstract: Nanocomposites represent a groundbreaking development in material science, leveraging the unique properties of nanoscale reinforcements to revolutionize the performance of traditional composite materials. By integrating nanomaterials, such as carbon nanotubes, graphene, nanoclays, and metal nanoparticles into a polymer, ceramic, or metal matrix, nanocomposites exhibit significantly enhanced mechanical properties, including improved strength, toughness, and durability. These improvements arise from superior interfacial interactions, efficient load transfer mechanisms, and increased resistance to mechanical …
Published in International Journal of Composite and Constituent Materials · Vol. 11, Issue 1, 2025 · pp. 46–52 Read article
-
Study of Corrosion of Ferrous and Non-Ferrous Metals in Aqueous Medium
Abstract: Metals, like ferrous and non-ferrous, interact on their interface to develop corrosion cells. The aqueous medium produces a hostile environment due to the availability of dissolved oxygen, acids, bases, salts, bio-waste, and effluents. The solubility of acidic gases oxide of carbon, oxide of nitrogen, and oxide of sculpture create an acidic medium for metal. These unfriendly environments accelerate corrosion reactions and metals exhibit uniform, galvanic, pitting, crevice, stress, and lynching …
Published in International Journal of Metallurgy and Alloys · Vol. 11, Issue 1, 2025 · pp. 44–50 Read article
-
Sustainability Assessment and Resource Optimization for Expansion of Metallurgical and Alloy Production Facilities in Odisha
Abstract: This study presents a comprehensive assessment of sustainability measures and resource optimization strategies for the expansion of metallurgical and alloy production facilities in Odisha, India. The research examines a facility expansion project encompassing 32.63 hectares, analyzing environmental impacts, resource utilization, and socioeconomic implications. The study evaluates key sustainability parameters including air quality management through ESPs and bag filters maintaining PM emissions below 30 mg/Nm³, water resource optimization with a projected …
Published in International Journal of Metallurgy and Alloys · Vol. 11, Issue 1, 2025 · pp. 18–25 Read article
-
Modeling the Behavior of Metal Corrosion in Aquatic Environments at Varying Depth
Abstract: The failures of engineering structures situated in the aquatic environment caused by corrosion cannot be over-emphasized. This research work addressed the effects of depths, heavy metals, microbial activities, and physiochemical properties of the water body on the corrosion of submerged metal structures in the water body (the water body is assumed flowing). Model techniques were applied to evaluate the relationship between diffusion and weight loss, as well as velocity and …
Published in International Journal of Metallurgy and Alloys · Vol. 11, Issue 1, 2025 · pp. 1–9 Read article
-
Comprehensive Composite Review: Insights, Challenges, and Future Trends
Abstract: A composite is a substance made up of two or more separate materials that have been blended or combined to create a new material with superior qualities. According to estimates from engineering materials research, there are more than 80,000 different kinds of materials in the world. It comprises both metallic and non-metallic materials, including semiconductors, ceramics, glasses, and plastics. Furthermore, various fields in which composites are used, including several industrial, …
Published in International Journal of Metallurgy and Alloys · Vol. 11, Issue 1, 2025 · pp. 10–17 Read article
-
Sustainable Labware Solutions: A Study of Biodegradable Modified Polypropylene for Sterilization‑Resistance
Abstract: This study investigated the impact of incorporating a 1‑3% by weight of biodegradable additive into polypropylene (PP) using twin‑screw extrusion, followed by injection molding to prepare test specimens. The effects of the additive on the rheological, thermal, mechanical, and optical properties of PP were investigated, along with the impact of two common sterilization methods: autoclave (121°C, 15 min, 0.11 MPa) and electron beam (E-Beam, 50 kGy) irradiation. The results showed …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 1, 2025 Read article
-
Facile Approach to Epoxidize Elastomers & Its Silica Composite for Green Tyre Application
Abstract: Rubber epoxidation is usually carried out to serve dual purpose, to introduce the functionality, and to enhance the polymer – filler interaction. In general, epoxidation of elastomers having unsaturation in backbone adopt conventional refluxing and batch process which makes the synthesis complex as well as time consuming. In view of this, a novel process of epoxidation through sonication technique is identified as simple and efficient process. Synthetic rubbers containing unsaturation …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 1, 2025 · pp. 14–27 Read article
-
Nanofibers of Ultra-High Molecular Weight Polypropylene (UHMWPP) Composites: Processing, Properties and Applications
Abstract: The nanofibers of ultra-high molecular weight polypropylene (UHMWPP) composite made with polyethylene terephthalate (PET) by electrospinning process. The high-temperature setup developed by hardware modifications in electrospinning machine to perform such experiments. Bilayer composite mat of UHMWPP and PET nanofiber was fabricated by deposition of monolayer of UHMWPP over PET monolayer by electrospining process. The developed composite mat products were characterized by SEM, DSC and other physico-chemical methods. The composite mat …
Published in International Journal of Polymer Science and Engineering · Vol. 11, Issue 1, 2025 · pp. 35–48 Read article
-
Novel Process for the Synthesis of Chlorinated Polyvinyl Chloride Using Unsaturated Polyvinyl Chloride Resin
Abstract: The present work is related to the process for the synthesis of a reactor made chlorinated polyvinyl chloride (CPVC) from commercially available thermally treated unsaturated PVC. The synthesis of CPVC is a two-step process. The first step is the controlled thermal treatment of the PVC to generate the unsaturation in the PVC chain. The second step is the chlorination of the thermally treated PVC in presence of an initiator and …
Published in International Journal of Polymer Science and Engineering · Vol. 11, Issue 1, 2025 · pp. 14–23 Read article
-
Synthesis of Brominated Poly (Isobutylene-co-Isoprene) Based Ionomers and Its Applications
Abstract: Reactive bromobutyl rubber and its modification have been studied in detail. These reactive bromobutyl rubber was converted to ammonium and phosphonium functionalized bromobutyl rubber using triphenyl phosphine (PPh3) and 4-Dimethylaminopyridine (4-DMAP). Mechanical properties of synthesized ionomers are found comparative with butyl rubber. Pharma stopper was made from synthesized phosphonium ionomer that may be useful for pharma industries due to its self-healing characteristics which can help to preserve the properties of …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 1, 2025 · pp. 47–55 Read article
-
Morphology and Elemental Composition of Carbon Fibers†
Abstract: Carbon fibers, owing to their unique property of high specific strength, find immense utility in almost all sectors of human activity, ranging from aeronautics, astronautics, geonautics, aquanautics, industry, catalysis, smart materials, defence, and many more. The production, properties, and applications of carbon fibers and related materials are a fertile and fast-growing research area drawing wide attention of researchers worldwide. The key feature of this original research paper is to study …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 1, 2025 Read article
-
Studies on Functionalized Nonwoven Polypropylene Fabric for Antibacterial & Antiviral Properties
Abstract: Nonwoven polypropylene (NWPP) fabric is a versatile material used predominantly in medical field for hygiene products and for PPE applications. The application of NWPP is limited in disinfectant area due to lack of antimicrobial properties and its non-polar nature. The coating of antimicrobial agents on NWPP fibre is expected to lower down the intensity of communicable microbial infections. The present study involves the surface functionalization of NWPP fibre via plasma …
Published in International Journal of Polymer Science and Engineering · Vol. 11, Issue 1, 2025 · pp. 24–34 Read article
-
Natural Polymers as Substitutes for Gelatine Capsules: A Comprehensive Overview
Abstract: Gelatine capsules are widely used in the pharmaceutical and nutraceutical industries for over a century due to their easy-to-swallow nature and their ability to release pharma active ingredients in a controlled manner. However, due to growing concerns over health, ethical issues, and environmental issues associated with the use of animal-derived products, there has been a significant interest towards developing natural, plant-based, and synthetic alternatives to gelatine. This article briefly explores …
Published in International Journal of Polymer Science and Engineering · Vol. 11, Issue 1, 2025 · pp. 9–13 Read article
-
Study of Electrical Polarization of Some Elements:The Effect of Displacement
Abstract: Electrical polarization is an essential phenomenon for material science, portraying the response of a material to the external electric field. This conceptual review has provided a model-based approach to understanding electrical polarization, The following elements as stated considered in this research, such as potassium (K), magnesium (Mg), scandium (Sc), titanium (Ti), vanadium (V) and chromium (Cr). Monitoring electrical polarization is the goal of this study. The electrical polarization model is …
Published in International Journal of Energetic Materials · Vol. 11, Issue 1, 2025 · pp. 12–21 Read article