Search
282 articles for “novel”
-
Enriched Technique for DG Placement and Sizing by GA Optimization
Abstract: The demand of proficient and high quality power is rising in the world of electricity. Power utilities are facing major challenges as the demand of power system is growing exponentially. To meet this demand, the present need is to provide the consumer demand locally by Distributed Generation (DG). However, a large number of DG units in a distribution system may occasionally provide to high levels of harmonic distortion even though …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 2, Issue 2, 2016 · pp. 1–12 Read article
-
Analysis of Energy Efficiency of Standalone PV Cell Through HC Algorithm and Transconductance
Abstract: This research could be used to analyze in the development of maximum power point tracking (MPPT) algorithm. This thesis presents the modeling and simulation of hill climbing (HC) MPPT using novel Single Ended Primary Inductance Converter (SEPIC). This research firstly introduces a practical model of photovoltaic by which the photovoltaic array’s model is obtained. The HC algorithm is used to track the maximum power from the solar panel. The MPP …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 3, Issue 2, 2017 · pp. 26–31 Read article
-
Non-isolated Sextuple Output Hybrid Converter Configuration
Abstract: This paper articulates the novel topology of non-isolated DC-DC converter derived from different basic configurations of single input, single output DC-DC converter suitable for renewable energy and high-voltage applications. Power circuit is incorporated with switched inductor circuit which acts as a voltage lift component. Therefore, it overpowers the parasitic effects of the circuit components. Conventional DC-DC converters like SEPIC, Cuk, Zeta, Boost, etc., are employed for renewable energy and industrial …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 5, Issue 1, 2019 · pp. 19–27 Read article
-
Denoising of Computer Tomography images using Wavelet based Multiple Thresholds Switching (WMTS) filter
Abstract: Computer Topography images are often corrupted by salt and pepper noise during image acquisition and /or transmission, reconstruction due to a number of non-idealities encountered in image sensors and communication channels. Noise is considered to be the number one limiting factor of CT image quality. A novel decision-based filter, called the wavelet based multiple thresholds switching (WMTS) filter, is used to restore images corrupted by salt-pepper impulse noise. The filter …
Published in International Journal of Telecommunications & Emerging Technologies · Vol. 1, Issue 1, 2015 · pp. 1–6 Read article
-
IoT-enabled Fault Alert Systems for Distribution Transformers: A Comprehensive Survey
Abstract: To improve the efficiency of the power distribution network, this article suggests a novel IoTarchitecture for monitoring and managing distribution system of transformers. The framework entailsinstalling sensors and other devices that capture important operational indicators and transmit theinformation to an IoT platform. A created web application can be used to control transformeroperation using the framework's alerts and commands. Continuous monitoring, prompt notifications,longer transformer lifespan, streamlined troubleshooting, and enhanced customer service …
Published in International Journal of Telecommunications & Emerging Technologies · Vol. 9, Issue 1, 2023 · pp. 18–24 Read article
-
NANOTECHNOLOGY- A TINY POSSIBLE SOLUTION TO THE GLOBAL WATER CRISIS?
Abstract: The rapidly increasing population, depleting water resources, and climate change have resulted in prolonged droughts and floods. This has rendered drinking water a competitive resource in many parts of the world. The development of cost-effective and stable materials and methods for providing fresh water in adequate amounts is the need for today’s world. Traditional water/wastewater treatment technologies remain ineffective for providing adequate safe water due to increasing demand of water …
Published in International Journal of Applied Nanotechnology · Vol. 3, Issue 1, 2017 · pp. 23–32 Read article
-
Synthesis and Characterization of Graphene Nanoplatelets & Graphene Oxide Based Nanofluids With Their Comparative Analysis for Heat Transfer Applications
Abstract: Stability and thermal conductivity are the main features of nanofluids. Higher concentration of nanoparticles become the reason of agglomeration, so a balance equation is required for the preparation of remarkable nanofluids in the application point of view. In the present study, we describe a novel synthesis of graphene Nanoplatelets and graphene oxide based nanofluids with different concentration (0.001,0.003,0.005wt %) with the help of stock solution of 1mg/ml. The Hummer’s method …
Published in International Journal of Applied Nanotechnology · Vol. 4, Issue 2, 2018 · pp. 13–29 Read article
-
Electrochemical impendence study of an AL 8088 /SiC Nano composite immersed in 1M Acid chloride Medium
Abstract: Aluminum Nano composite have received considerable attention among researcher and engineering as a prominent choice material for building and construction purposes. The preference of Aluminum Nano composite as replacement for conventional Aluminum alloy is chiefly due excellent strength to weight ratio .However the problem of accelerated corrosion attributed to the reinforcement particle used in the production of Aluminum Nano composite is well documented in the literature and serves as potential …
Published in International Journal of Applied Nanotechnology · Vol. 4, Issue 2, 2018 · pp. 6–12 Read article
-
Effect of Calcium doping on Structural and Morphological properties of YBCO Superconductor
Abstract: In this paper, we have reported the effect of Ca doping in YBCO superconductors with an aim of understanding the effect of novel local nano distortions on the superconducting properties of YBCO. Solid state reaction method is used to prepare the samples. X-Ray diffraction pattern shows that the samples are polycrystalline and having orthorhombic structure while Resistivity measurement shows that Tc decreases with increase in Ca-doping.Morphological studies reveals clear evolution …
Published in International Journal of Applied Nanotechnology · Vol. 6, Issue 1, 2020 · pp. 6–10 Read article
-
A Review on Perovskite Nanostructure for Renewable Energy Applications in Recent Advances
Abstract: Efficient energy production as well as storing energy plays a big challenge to the researchers in these decades. Perovskite nanomaterials have excellent tunable optoelectronic properties and are suitable for a wider range of renewable energy device fabrication. The objective of this paper is to review various applications of perovskite nanostructure for the renewable energy fields. This review discusses the origin of perovskite materials and the potential field for the application …
Published in International Journal of Applied Nanotechnology · Vol. 6, Issue 2, 2020 · pp. 1–4 Read article
-
Looking at the Future through Nanotechnology
Abstract: Looking at the Future through Nanotechnology is a dissertation on the enormous potential of nanotechnology in the future of every field, research and industry present. This article especially focusses on the fields of Health, Environment and Warfare since they are constantly a hot topic of debate among many research groups. A formal definition given by National Nanotechnology Initiative (NNI) states that nanotechnology is the understanding and control of matter at …
Published in International Journal of Applied Nanotechnology · Vol. 7, Issue 1, 2021 · pp. 1–8 Read article
-
Recent Advancement of Nanotechnology in Plant Disease Management
Abstract: Nanoparticles are small size particles having potential to work in large surface area. Size of nanoparticles vary from 1-100 nm. The composition of nano-formulation should break down quickly in the soil and sluggishly in plants with remnant levels under the regulatory standards in foodstuffs. The nanoparticle synthesis methods can be categorized into bottom-up or top-down method Physical- Ball milling, nanolithography, pulsed laser, electrochemical; Chemical- Vaccum deposition and vaporization, chemical vapor …
Published in International Journal of Applied Nanotechnology · Vol. 7, Issue 2, 2021 · pp. 34–42 Read article
-
Melanoma’s Nemesis: Assessing the Pharmacological Impact of Curcumin and its Analogues as Inhibitors of Identified Biomarkers Via Network Pharmacology
Abstract: Objectives: Since the advent of next-generation sequencing, melanoma has been recognized as an immensely heterogeneous disease, leading to the discovery of numerous underlying genetic drivers over time. Bioinformatic and machine learning analyses have become increasingly prevalent in risk stratifying melanoma patients with high accuracy, leveraging genetic, clinical, and histopathological inputs. Via various research curcumin has been identified and also shown therapeutic efficacy in Melanoma. In order to reveal the interactions …
Published in International Journal of Applied Nanotechnology · Vol. 9, Issue 1, 2023 · pp. 33–44 Read article
-
OPTIMIZING MAGNETIC BEHAVIOR OF NANO-CRYSTALLINE CO2CrAl TYPE HEUSLER ALLOY POWDER USING RESPONSE SURFACE METHODOLOGY
Abstract: In the present work, Co2CrAl heusler alloy powder prepared successfully from premix basic powders of Cobalt (Co), Chromium (Cr) and Aluminium (Al) in stoichiometric of 60Co-26Cr-14Al (weight %) by novelistic mechano-chemical route. Mgnetic properties of mechanically alloyed powders were characterized by vibrating sample magnetometer (VSM). The performed experiment has been designed on the basis of 2 factor 5 level response surface methodology. Experimental results were used to develop a mathematical …
Published in International Journal of Energetic Materials · Vol. 6, Issue 1, 2020 · pp. 7–13 Read article
-
Use of Nano-additives in Rubber Compounding: A Review
Abstract: Rubber nanocomposites nowadays find an important position both in academic and industrial point of view and extensive research work is under way in this area. Due to their ever-growing significance of nano-additives, thorough investigation becomes necessary especially for their applications in various industries. Due to enhanced surface area and high aspect ratio of nanomaterials results in superior matrix/filler interaction and lead to superior and versatile properties in wide range of …
Published in International Journal of Energetic Materials · Vol. 7, Issue 1, 2021 · pp. 40–47 Read article
-
Recent Advances in the Development & Application of the High Energy Explosives
Abstract: High energy explosives play a pivotal role in various fields ranging from military applications to industrial uses. Recent advancements in materials science, chemical engineering, and detonation physics have led to significant strides in the development and application of high energy explosives. This paper provides an overview of these recent advances, focusing on key innovations in explosive formulations, manufacturing techniques, and performance optimization. One notable area of progress is the development …
Published in International Journal of Energetic Materials · Vol. 9, Issue 2, 2023 · pp. 18–23 Read article
-
Exploring Alloys: Properties, Applications, and Future Trends
Abstract: Alloys, integral to modern technology and engineering, are combinations of metals with other elements designed to enhance material properties. This exploration delves into the diverse properties, widespread applications, and emerging trends in alloy development. The study examines mechanical properties such as strength, ductility, and corrosion resistance, which are tailored through compositional variations and processing techniques. Applications across various industries—including aerospace, automotive, electronics, and biomedical fields—are highlighted, showcasing the versatility and …
Published in International Journal of Metallurgy and Alloys · Vol. 9, Issue 1, 2023 · pp. 13–19 Read article
-
In-Vitro Evaluation of Control Release of Drug with Carbon Based Nanomaterials
Abstract: Nanomaterials have been introduced as a novel & interesting materials due to their advance properties & their use in nanotechnology applications like nano-sensors, nano-chips, control & targeted drug delivery, diagnosis, gene therapy. These all possibilities are due to their physico-chemical & multifunctional biological characteristics. In medicine, control release of drug is a factor to reduce dosage form in revert reduce side effects. In this work, nanomaterials are using as a …
Published in International journal of Nanobiotechnology · Vol. 1, Issue 1-2, 2015 · pp. 14–18 Read article
-
A Review on Medical Perspective of Nanobiotechnology
Abstract: Nanobiotechnology is the utilization of nanotechnology in natural fields. Nanotechnology is a multidisciplinary field that right now selects methodology, innovation and office accessible in routine and propelled streets of building, material science, science and science. An exhaustive audit of the writing on the standards, constraints, difficulties, enhancements and uses of nanotechnology in therapeutic science was performed. Nanobiotechnology has large number of possibilities for propelling medicinal science in this manner enhancing …
Published in International journal of Nanobiotechnology · Vol. 1, Issue 1-2, 2015 · pp. 19–29 Read article
-
Biosynthesis, characterization of gold nanoparticles using M. indica leaf extractand their anticancer activity
Abstract: The present study involves the novel approach for the synthesis of nanomaterial holds infinite possibilities as nanotechnology has a major impact on medicine and its application. Leaf extract of Mangiferaindicais a very good bioreductant for gold chloride (HAuCl4·4H2O) which leads to the synthesis of gold nanoparticles. Leaf extract of Mangiferaindicawas mixed with gold chloride (HAuCl4·4H2O) and UV-vis spectroscopy was used to detect the synthesis of nanoparticles. TEM and FESEM were …
Published in International journal of Nanobiotechnology · Vol. 2, Issue 2, 2016 · pp. 1–4 Read article