Search
1120 articles for “properties”
-
Behavior and Comparison of High Strength Concrete (M45) Using Super Plasticizers (SP 430) As Admixture
Abstract: The Aim of this paper is to study the High Strent gh Concrete of mix design M45 with P.P.C, O.P.C and compare the Mechanical Properties. Admixures have been used for generating High Strength Concrete and optimum dosage. Comparative studies of High Strentgh Concrete using P.P.C, O.P.C and by using 0.5%, and 1% of Super Plasticizer (S.P 430) with O.P.C.
Published in International Journal of Composite and Constituent Materials · Vol. 4, Issue 1, 2018 · pp. 19–23 Read article
-
Mechanical Behavior of AA7075/Glass Fiber Reinforced Polymer Composites
Abstract: This paper reports on the mechanical properties of As-cast and heat-treated AA7075 polymer composites reinforced with glass fibers from 1 to 5 wt%. The polymer composites were fabricated using the Compo casting method, in which short glass fibers were introduced into the vortex created in the molten alloy through an impeller rotated at 500 rpm. The molten mass was thoroughly stirred and poured into permanent molds and squeezed under pressure. …
Published in International Journal of Composite and Constituent Materials · Vol. 6, Issue 2, 2020 · pp. 11–20 Read article
-
Assessment of Polymer Nanocomposite for Packaging Uses and Concerns about Environmental and Health Effects
Abstract: A nanocomposite material is composed of several phases with at least one, two, or three dimensions in the nanoscale range. When material dimensions are lowered to the nanoscale, phase interfaces are created, and they are essential for enhancing the material's characteristics. The surface area to volume ratio of the reinforced material used to create nanocomposites has a direct bearing on how structure and property relate to one another. Due to …
Published in International Journal of Composite and Constituent Materials · Vol. 9, Issue 2, 2023 · pp. 10–36 Read article
-
Mechanical Characteristics of Polypropylene Composites Reinforced with Hybrid Fibers: Fabrication and Evaluation
Abstract: The goal of current research is to replace synthetic materials with natural, biodegradable, and renewable ones. A lot of study is being done on natural fiber composites because of its unique properties and environmental friendliness. Natural fibers are advantageous since they are easily accessible, manageable, and biodegradable. The goal of the current study is to evaluate the changes in the mechanical properties of polypropylene reinforced with chopped pineapple leaf and …
Published in International Journal of Composite Materials and Matrices · Vol. 9, Issue 2, 2023 · pp. 20–31 Read article
-
Green Adhesive—Using Glyoxalated Lignin and Hydrogenated Resin as Ecologically Safe Wood Adhesive for Interior Plywood
Abstract: Petroleum-based adhesive such as urea formaldehyde and phenol formaldehyde resin dominates adhesive market which releases formaldehyde and VOC to the environment. The purpose of this study is to develop an adhesive based on isocyanate in combination with compounds from renewable sources like lignin, protein and starch. Adhesive formulation was developed by incorporation of hydrogenated resin, corn starch/PVOH emulsion with glyoxalated lignin (GL) and evaluation properties of the adhesive with plywood …
Published in International Journal of Polymer Science and Engineering · Vol. 1, Issue 1-2, 2015 · pp. 23–27 Read article
-
Optimization of Process Parameters of GMAW for Penetration, Toughness and Tensile Strength by using Taguchi Method
Abstract: Aluminum and its alloys are having variety of applications in Aircraft, food processing etc. Moreover; the use of Aluminum and its alloys are increasing day by day due to its specific properties, like light weight, high strength, and excellent corrosion resistance. However; the present study is planned to analyze and optimize the aluminum weld joint characteristics like tensile strength, penetration and toughness by using Gas Metal arc welding (GMAW) welding. …
Published in International Journal of Mechanics and Design · Vol. 5, Issue 1, 2019 · pp. 1–9 Read article
-
Effect of Nano-Fillers on the Mechanical and Fracture Behavior of Polymer Composite Matrices: A Review
Abstract: The modification of polymer composite matrices through the incorporation of nano-scale fillers has become a prominent and highly effective strategy for enhancing mechanical performance, stiffness, and fracture resistance. Unlike conventional micro-scale reinforcements, nano-fillers possess exceptionally high surface area–to–volume ratios and unique physicochemical characteristics that significantly influence interfacial phenomena within the polymer matrix. Materials, such as carbon nanotubes (CNTs), graphene nanoplatelets (GNPs), nano-silica, and layered silicate nanoclays, introduce advanced toughening mechanisms …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 1, 2026 · pp. 31–36 Read article
-
A Comprehensive Review of Metal Matrix Composites (MMCs)
Abstract: Abstract Metal Matrix Composites (MMCs) combine metallic matrices with reinforcing phases (ceramics, intermetallics, fibers, or particles) to achieve superior mechanical, thermal, and tribological properties compared with monolithic metals. This review surveys fabrication routes, reinforcement types, microstructural characteristics, mechanical and tribological behavior, machining challenges, applications across aerospace, automotive, electronics, and future directions including additive manufacturing, in-situ MMCs, and data-driven materials design. Critical challenges such as interface control, scalability, cost, and machinability …
Published in International Journal of Manufacturing and Materials Processing · Vol. 11, Issue 2, 2025 · pp. 1–5 Read article
-
Implications of Asphalt Plant Discharge Water on Agromorphological Parameters and Photosynthetic Processes of Edible Vegetables
Abstract: Untreated industrial waste discharges emitted into the environment have a negative impact on all components of the ecosystem, especially the soil properties. The aim of the study is to evaluate the effects of heavy metal concentrations present in asphalt plant discharges on the soil properties, photosynthetic activities and agromorphology of the vegetable plants. Soil samples used for the experiment were collected from Federal University of Technology Owerri Botanical Garden. The …
Published in International Journal of Agrochemistry · Vol. 11, Issue 2, 2025 Read article
-
Review Article: Butyl and Halo-Butyl Rubbers
Abstract: Butyl and halo butyl rubbers are key raw materials for various industries due to their exceptional properties, like permeability to gases, high chemical resistance, and durability. Butyl rubber (IIR) is composed of isobutylene with small amounts of isoprene, offering a low permeability to gases, making it ideal for applications in the automotive, medical, and consumer goods. Butyl Rubber is non-polar nature and possess excellent insulation properties which further enhance its …
Published in International Journal of Polymer Science and Engineering · Vol. 11, Issue 2, 2025 Read article
-
Pteridophytes as a Source of Traditional Medicine and Environmental Remediation: A Comprehensive Review
Abstract: The Himalayas, one of the worlds’ most important biodiversity hotspots, contribute substantially to the vegetational resources of the Indian subcontinent, with the Garhwal Himalaya standing out for its rich and diverse flora. Among the plant species in this region, pteridophytes, particularly ferns, hold notable economic and medicinal value. These plants have long been integral to traditional medicine systems, such as Ayurveda, and their therapeutic properties have been passed down through …
Published in International Journal of Plant Biotechnology · Vol. 10, Issue 2, 2024 · pp. 33–36 Read article
-
Sustainable Labware Solutions: A Study of Biodegradable Modified Polypropylene for Sterilization‑Resistance
Abstract: This study investigated the impact of incorporating a 1‑3% by weight of biodegradable additive into polypropylene (PP) using twin‑screw extrusion, followed by injection molding to prepare test specimens. The effects of the additive on the rheological, thermal, mechanical, and optical properties of PP were investigated, along with the impact of two common sterilization methods: autoclave (121°C, 15 min, 0.11 MPa) and electron beam (E-Beam, 50 kGy) irradiation. The results showed …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 1, 2025 Read article
-
Synthesis of Brominated Poly (Isobutylene-co-Isoprene) Based Ionomers and Its Applications
Abstract: Reactive bromobutyl rubber and its modification have been studied in detail. These reactive bromobutyl rubber was converted to ammonium and phosphonium functionalized bromobutyl rubber using triphenyl phosphine (PPh3) and 4-Dimethylaminopyridine (4-DMAP). Mechanical properties of synthesized ionomers are found comparative with butyl rubber. Pharma stopper was made from synthesized phosphonium ionomer that may be useful for pharma industries due to its self-healing characteristics which can help to preserve the properties of …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 1, 2025 · pp. 47–55 Read article
-
Influence of Surface Treatments on the Adhesion of Plant Fibers to Epoxy Resin
Abstract: Because of their primary benefits, moderate strength and stiffness, low cost, and the fact that they are a renewable, biodegradable, and environmentally safe material, natural fibers are seen to have potential use as reinforcing agents in polymer composite materials. Since they are inherently hydrophilic, moisture can easily build up on them, weakening or plasticizing the fibers’ adhesion to the surrounding matrix and affecting the performance of composite materials used in …
Published in International Journal of Agrochemistry · Vol. 11, Issue 1, 2025 · pp. 12–24 Read article
-
Evaluation of the Potential of Fused Silica Material: The Relationship of Temperature, Frequency, and Polarization
Abstract: Fused silica, a high-purity form of silicon dioxide, is widely recognized for its exceptional thermal stability, optical transparency, and low dielectric loss. This study evaluates the potential of fused silica as a material in advanced optical, electronic, and photonic applications by exploring its properties in relation to temperature, frequency, and polarization. Through a comprehensive analysis, we examine the temperature-dependent changes in its thermal and optical properties, including thermal expansion, refractive …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 10, Issue 2, 2024 Read article
-
Surface Modification and Performance Evaluation of Biologically Degummed Lady’s Finger Bast Fibers
Abstract: This research aims to investigate the physicomechanical characteristics of biologically degummed lady’s finger bast fiber (LFF) and to walk through the entire process of turning LFF into a commercial cellulosic fiber that can be used globally in a variety of textile applications, including carpets, oil and liquid absorption, packaging, basic textile products, coarse ornamental textile products, geo-textiles, and reinforcements in polymer matrix composites. This article describes the application of different …
Published in International Journal of Composite and Constituent Materials · Vol. 11, Issue 1, 2025 · pp. 21–34 Read article
-
A Review on Steel Metallurgy
Abstract: Steel is mostly manufactured in the manufacturing industries and it is nearly ninety percent due to its extremely higher strength and high toughness. This review paper discusses on the classification of steels, steel as a potential engineering material, mechanical properties and fabrication properties of steels. It also explains on its applications, low alloy steels groups and its properties. This review article also discusses on special steels like micro alloyed steels, …
Published in International Journal of Manufacturing and Materials Processing · Vol. 10, Issue 1, 2024 · pp. 1–6 Read article
-
Prediction of Shear Strength Parameters Using Multiple Regression Analysis
Abstract: Shear strength is a principal engineering property of soil. It controls the stability of a soil mass under structural loads and is used in design of foundation. In this study, a survey was carried out in and around the Bhauti region of Kanpur district, Uttar Pradesh and accordingly nine sampling locations was identified. All the samples were collected from a depth of 50 cm and analyzed for different geotechnical properties …
Published in International Journal of Landscape Planning and Architecture · Vol. 5, Issue 2, 2019 · pp. 26–39 Read article
-
Novel Ionic Liquids Supported Membranes: A Review
Abstract: In this work, a supported ionic liquid membrane (SILM) can be prepared by impregnating different types of polymers with suitable novel phosphonium-based ionic liquids (ILs). ILs have reached an enormous interest as CO2 solvents and other engineering applications due to their unique properties such as negligible vapour pressure and selectivity, making them very attractive in order to obtain stable supported liquid membranes. This work can appraise the preparation and use …
Published in International Journal of Chemical Separation Technology · Vol. 2, Issue 2, 2016 · pp. 15–23 Read article
-
Potato Starch-Based Polyethylene Composite: Fabrication and Evaluation
Abstract: This study's objective was to create and evaluate a biodegradable polymer composite consisting of potato starch (PS) and low-density polyethylene (LDPE). The effects of changing the PS content (10– 40 wt%) on the mechanical (elongation at break and tensile modulus), thermal (heat conductivity), and biodegradability characteristics of the polymer composite were examined. Next, it was examined how the cross-linking agent influenced the polymer composite's mechanical and thermal properties. The melt …
Published in International Journal of Chemical Separation Technology · Vol. 8, Issue 2, 2022 · pp. 32–44 Read article