Search
1085 articles for “Samples”
-
Field Investigation on the Use of Mobile Phone While Driving
Abstract: While talking through mobile phone, drivers are much less aware of what is happening on the road around them; fail to see road signs, maintain proper lane position and steady speed; react more slowly and take longer to brake. Moreover, drivers are more likely to enter unsafe gaps in traffic, feel more stressed and frustrated, and are more likely to tailgate the vehicle in front. This paper demonstrates field investigation …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 1, Issue 2, 2015 · pp. 11–19 Read article
-
Thermal Effects on Elastic and Rigidity Modulus of Flexible Pavement Wearing Course
Abstract: Laboratory investigation of flexible pavement was carried out using asphalt concrete samples to simulate the behaviour of actual field conditions of a flexible pavement. The study was carried out in order to ascertain the changes that will result in the elastic and rigidity (shear) modulus of flexible pavement when subjected to increasing temperature conditions (thermal effect). The study became pertinent because mechanistic design of flexible pavement requires as input the …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 3, Issue 2, 2017 · pp. 1–7 Read article
-
Preliminary Studies on Chemical Characteristics Including Fluoride and Iron Concentration in Ground Waters of Telaiya, Koderma District, Jharkhand, India
Abstract: The problem of high concentration' of various chemical constituents in ground water resources has now become one of the most important health-related geo-environment issues in India. Considering above fact, a preliminary study as chemical characteristics of six groundwater and surface water samples were carried out to assess its suitability for drinking water with reference to Indian Standard Institute and World Health Organization standards and also evaluate the geo-chemical and geological …
Published in International Journal of Water Resources Engineering · Vol. 3, Issue 2, 2017 · pp. 47–52 Read article
-
Variation on Water Quality Parameters Including Trace Elements of Brahmani River over a Stretch of Six Districts in Orissa, India
Abstract: Surface water samples from river Brahmani of Orissa, India were collected from 17 locations of 6 districts all along the northwest and southeast of Orissa in three different phases; winter, pre-monsoon and post-monsoon. The collections were done in the month of January, May and September. Samples were tested for each category, viz. physical, chemical and trace elements and their average values were considered for a more approximate comparison. In each …
Published in International Journal of Water Resources Engineering · Vol. 3, Issue 2, 2017 · pp. 53–61 Read article
-
Water QUALITY ANALYSIS AND REMEDIAL MEASURE FOR NEAR BY VILLAGE WAGHOLI (DOMKHEL VASTI)
Abstract: This paper presents groundwater quality of nearby village Wagholi (Domkhel Vasti). Four different locations were selected for the study and compared. The parameters studied were pH, Turbidity, Chloride Content, Total Hardness. From overall analysis, it was observed that there was a slight fluctuation in the Turbidity, Chloride Content, Total Hardness among the water samples studied. Comparison of the result of the water sample with IS 10500:2012 showed that the certain …
Published in International Journal of Water Resources Engineering · Vol. 6, Issue 2, 2020 · pp. 23–27 Read article
-
An Investigation of Groundwater Quality In The Upper Ponnaiyar Watershed, Tamilnadu
Abstract: The study analyzes groundwater quality in the hard rock terrain of the upper Ponnaiyar watershed using statistical methods and chemical parameters. 27 water samples were collected from bore wells for pre monsoon and post monsoon periods and were tested for various parameters such as Electrical conductivity (EC), pH, Total dissolved solids (TDS), Total Hardness (TH), Sulphate (SO4), Chloride (Cl), Calcium (Ca), Iron (Fe), Fluoride and Manganese (Mn). The Water Quality …
Published in International Journal of Water Resources Engineering · Vol. 9, Issue 2, 2023 Read article
-
A Simple Method for Estimation of Surface Transfer Impedance of Coaxial Cables as Per MIL STD 1377 for EMC Qualification
Abstract: In recent years, electromagnetic compatibility (EMC) problems associated with high frequency and high speed inter connects are becoming of increasing concern. Coaxial cables are a popular form of inter connect between intra- and intersystems and subsystems. Transfer impedance is a measure for assessing the shielding effectiveness of outer shield of a coaxial cable. In this paper, we proposed an easy and inexpensive method for estimating the surface transfer impedance (STI) …
Published in International Journal of Microwave Engineering and Technology · Vol. 2, Issue 1, 2016 · pp. 31–38 Read article
-
A Comprehensive Review of IoT-Enabled RC Boats for Real-Time Water Pollution Monitoring
Abstract: For all people today, drinking water is the most significant and precious resource. Real-time operations present new difficulties for drinking water utilities. Due to factors including dwindling water supplies, population growth, deteriorating infrastructure, etc., this problem developed. Better methods of checking the quality of the water are therefore required. The traditional approach to measuring water quality entails manually collecting water samples at various sites, followed by laboratory analytical procedures to …
Published in International Journal of Microwave Engineering and Technology · Vol. 8, Issue 2, 2022 · pp. 20–27 Read article
-
Zinc oxide/Chitosan biocompatible nanocomposites: Preparation, Characterization and its use in Congo red dye photodegradation
Abstract: Zinc oxide/chitosan biocompatible nanocomposites have been successfully synthesized by co-precipitation method. The samples were characterized by X-ray diffraction (XRD), Scanning electron microscope (SEM), Energy dispersive X ray Flurescence spectroscopy (EDAX) and Fourier transformation infrared spectroscopy (FTIR). The photocatalytic efficiency and photostability of the sample was investigated systematically for Congo red degradation under solar light irradiation. UV-vis Spectroscopy was employed to investigate the optical properties and photocatalysis behavior of the Zinc …
Published in International Journal of Applied Nanotechnology · Vol. 3, Issue 2, 2017 · pp. 27–39 Read article
-
Effect of Calcium doping on Structural and Morphological properties of YBCO Superconductor
Abstract: In this paper, we have reported the effect of Ca doping in YBCO superconductors with an aim of understanding the effect of novel local nano distortions on the superconducting properties of YBCO. Solid state reaction method is used to prepare the samples. X-Ray diffraction pattern shows that the samples are polycrystalline and having orthorhombic structure while Resistivity measurement shows that Tc decreases with increase in Ca-doping.Morphological studies reveals clear evolution …
Published in International Journal of Applied Nanotechnology · Vol. 6, Issue 1, 2020 · pp. 6–10 Read article
-
Effect of Polystyrene Nanoparticles from Recycled Waste Material on the Properties of Asphalt
Abstract: There is growing concern in many parts of the world over the increasing stress placed on the asphaltic material used to pave streets, highways, and runways due to higher traffic volumes and climatic and other environmental factors (e.g., heat, storms, ultraviolet radiation). Adding asphalt modifiers (e.g., polymers) on both the micro and macro scales has improved this material’s physical and rheological properties, but recent research, especially in the field of …
Published in International Journal of Applied Nanotechnology · Vol. 8, Issue 2, 2022 · pp. 37–50 Read article
-
Correlation between full width at half maximum (FWHM) of XRD peak with mechanical properties
Abstract: Full width at half maximum (FWHM) of XRD profiles characterizes different mechanical properties. However, there is no literature available that discusses about the correlation between the FWHM of XRD peaks with mechanical properties (ultimate tensile strength, yield strength, strain hardening coefficient and micro-hardness) upon plastic deformation. Martensitic stainless steel (type 410) and Ferritic stainless steel (type 430) samples were plastically deformed under different strain rate using tensile testing machine. Variation …
Published in International Journal of Metallurgy and Alloys · Vol. 1, Issue 1, 2015 · pp. 15–23 Read article
-
Study of the effect of Silicon oxide nanoparticles in the copper alloy
Abstract: The main objective of this paper is to study the effect of the Silicon oxide nano particles in the copper alloy which is manufactured by using the stir casting process and samples are prepared as per the ASTM standards. These specimens are tested under the mechanical tests. Due to blending of the nanoparticles the properties of copper alloy will be enhanced. so uniform ASTM samples with varying composition of nano …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 2, 2020 · pp. 24–31 Read article
-
Empirical Modelling of Metal Corrosion in Loamy Soil and Saltwater Environment
Abstract: The corrosion rate of metal in loamy soil and saltwater environment was monitored, predicted, and simulated using empirical modeling. The metal under investigation is carbon steel, which is found in a loamy soil and saltwater environments. The carbon steel sample immersed in a saltwater medium exhibited a higher corrosion rate compared to the loamy soil sample. The rise in corrosion of carbon steel can be attributed to the physiochemical characteristics …
Published in International Journal of Metallurgy and Alloys · Vol. 9, Issue 1, 2023 · pp. 20–34 Read article
-
Facile Fabrication of Durable Superhydrophobic Coatings on SS 304 for biomedical applications
Abstract: A simple and effective method to fabricate durable superhydrophobic coatings by combining shot-blasting and depositing sol-gel nanocomposite coatings on stainless steel SS 304 substrates has been investigated. Shot-blasting was used for two purposes; 1) as a method of physical modification for creating microscale roughness on the substrate and 2) for improving the adhesion of the nanocomposite coatings deposited thereafter. Organic-inorganic hybrid hydrophobic silica sol was synthesized where silica nanoparticles were …
Published in International journal of Nanobiotechnology · Vol. 4, Issue 2, 2018 · pp. 21–34 Read article
-
Synthesis and Characterization of Cesium Intercalated Graphene Thin Film
Abstract: Graphene Oxide (GO) becomes promising two-Dimensional (2D) material in optoelectronics due to its sparkling properties. In preparation step we used Carboxylation of graphene and vacuum filtration to create the free standing thin film of cesium (Cs) intercalated GO. In this work we have synthesized cesium (Cs) intercalated GO thin films at different concentration (0.03, 0.05, 0.1 mol %) by using vacuum filtration method. The functional group present in synthesized thin …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 4, Issue 1, 2018 · pp. 8–16 Read article
-
Structural and Optical Study of CdSe Q-dots
Abstract: In this paper we have report the properties of CdSe Q-dots. Calculations of different parameters for different sizes of CdSe Q-dots are presented. The XRD analysis used to find the composition, crystal structure and crystallite size. Scherrer equation is used to calculate the Nano crystallite size. XRD analysis reveals that the CdSe QD crystallite sizes in the sample are 3.26 nm, 3.72 nm, and 3.20 nm by applying the appropriate …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 8, Issue 1, 2022 · pp. 25–30 Read article
-
Fabrication and characterization of Aluminum-Granite-Graphite Metal Matrix Composite
Abstract: Moving machine elements are constantly subjected to wear and tear. Machine life can be improved by using hard and wear resistant materials. Most of machine elements are made of metals or alloys. These materials alone cannot meet the requirements of design of long-life machines. Naturally occurring hard materials lack the strength to withstand the machine loads. Composite materials provide the solution to such requirements. Based on requirement, a composite material …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 2, 2020 · pp. 20–30 Read article
-
Demonstration of Adsorbent Morphology of Different Particle Size for Petroleum Hydrocarbon Treatment in Packed Bed
Abstract: The choice of plantain stem, banana stem and palm oil fibre prepared for treatment of water medium polluted with petroleum hydrocarbon was monitored in a packed bed unit. The raw materials (plantain and banana stem as well as palm oil fibre) were room and sun dried and processed to obtained different particle size of 50, 150 µm and 200 µm. The raw material after processed was used as an adsorbent …
Published in International Journal of Composite Materials and Matrices · Vol. 9, Issue 2, 2023 · pp. 13–19 Read article
-
Study of Dynamic Mechanical and Thermal Properties of Poly(Ether Ether Ketone) Carbon Nanotubes
Abstract: The effect of polyetherimide (PEI) as a compatibilizing agent on the morphology, thermal, electrical and dynamic-mechanical properties of poly(ether ether ketone) (PEEK)/single-walled carbon nanotube (SWCNT) nanocomposites, has been investigated for different CNT loadings. After a pre-processing step based on ball milling and premixing under mechanical treatments in ethanol, the samples were prepared by melt extrusion. A more homogeneous distribution of the CNTs throughout the matrix is found for composites containing …
Published in International Journal of Polymer Science and Engineering · Vol. 3, Issue 1, 2017 · pp. 1–21 Read article