Search
458 articles for “concentration”
-
Expedition to Nanosynthesis: A Review
Abstract: Semiconducting metal oxide (like SnO2, ZnO, Ga2O3, Co3O4,TiO2, WO3, etc.) based gas sensors are widely used for the detection of the gases like H2, CO, Nox, CH4 and other hydrocarbons due to its smaller particle size as well as higher surface to volume ratio. Presently several nanoforms of metal oxides like rods, combs, rings, springs, wires, belts, propellers are becoming popular in the field of optoelectronics, ultra-sensitive nanosized gas sensors, …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 2, Issue 1, 2016 · pp. 1–23 Read article
-
Synthesis of 2-(2,3-dichlorophenyl)-5-(substituted)-1,3,4-Oxadiazole Microcrystals by Solvothermal Method and Assessment of in vitroAntibacterial with Docking and in vivo Larvicidal Efficiency with Comprehensive Toxicological Studies
Abstract: 2,5-Disubstituted 1,3,4-oxadiazole compounds are among the most beneficial organic molecules of biological importance. In the current research, a new series of 2-(2,3-dichlorophenyl)-5-(substituted)-1,3,4-oxadiazole compounds have been synthesized solvothermally from derivatives of2,3-dichloro-N'-(substituted)benzohydrazide and Chloramine-T as an oxidizing agent using autoclave with good yield. The obtained products are micro-sized (5µm–20µm) crystals confirmed through SEM. The structures of synthesized compounds were confirmed through IR, 1H-NMR, 13C-NMR, mass Spectroscopy, Elementary analysis. Molecular docking study shows …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 6, Issue 1, 2020 · pp. 29–44 Read article
-
Effect of Compatibilizers on Polypropylene-Based Peanut Shell Flour Composites Reinforced with Nanoclay
Abstract: The improvement of innovative ingredients is on the rise, especially in the automobile, aerospace, aviation, and construction industries. Conventional ingredients are being substituted with nanocomposite ingredients due to their excellent features. In this study, various composites based on polypropylene (PP), peanut shell flour (50 wt% PSF), and nanoclay (Cloisite 30B) were manufactured by melt mixing process followed by injection molded in the presence of maleated PP (PPM) and maleated styrene …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 8, Issue 2, 2022 · pp. 1–13 Read article
-
Effect of Nanoclay on the Performance of Calotopis Gigantea Fiber Reinforced Thermoplastic Composites at Distinct Temperature
Abstract: Polymer-based nanocomposite is a developing subject that attracts many researchers due to its special qualities and versatility. Because the specific surface areas of nanofillers in nanocomposites are so high, it is much simpler to produce mechanical properties at the interface. Furthermore, a favorable interaction between the nanofillers and polymer matrix may manifest itself even at comparatively lower percentages of loading nanofillers. Thus, a smart, adaptive polymer nanocomposite material with the …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 9, Issue 2, 2023 · pp. 1–9 Read article
-
Solution to the Arsenic Problem in West Bengal: Exploring Some Non-Conventional Ways
Abstract: Some districts of West Bengal have severe arsenic contamination of soil and groundwater. The clinical manifestations of arsenic toxicity include severe skin lesions; diseases of respiratory, cardiovascular, excretory system, hepatological, haematological and neurological disorders; and even death. We have isolated arsenic-resistant bacteria which have the adaptability to survive in high arsenic concentration, accumulate arsenic and convert it to its less toxic form. Therefore, we propose bioremediation as a cost-effective and …
Published in International Journal of Composite and Constituent Materials · Vol. 4, Issue 1, 2018 · pp. 1–4 Read article
-
Corrosion Inhibition Studies of Triazinedithiol Inhibitors for Mild Steel in an Acid Chloride Solution
Abstract: Two environmental pleasant triazine dithiol inhibitors 6-diallylamino-1,3,5-triazine-2,4-dithiol monosodium (DAN)and 6-dibutylamino-1,3,5-triazine-2,4-dithiol monosodium (DBN) was synthesized and their corrosion inhibition for slight metallic in a 1 M HCl solution turned into studied the usage of weight reduction methods, electrochemical measurements, and scanning electron microscopy (SEM) techniques. The inhibition efficiency of both DAN and DBN improved with increases in inhibitor concentration but decreased with increases in temperature. Results from potentiodynamic polarization and EIS …
Published in International Journal of Composite and Constituent Materials · Vol. 6, Issue 2, 2020 · pp. 1–10 Read article
-
Evaluation of Antimicrobial Efficacy of Photogenic Iron Nanoparticles Against Xanthomonas campestris
Abstract: This study investigates the antimicrobial efficacy of photogenic iron nanoparticles (FeNPs) against Xanthomonas campestris, a notorious plant pathogen causing bacterial spot disease in various crops. The synthesis of FeNPs was achieved through a facile and eco-friendly green synthesis approach, utilizing a plant extract as a reducing and capping agent. The resulting photogenic FeNPs were characterized using various analytical techniques, confirming their size, morphology, and composition. The antimicrobial activity of the …
Published in International Journal of Composite and Constituent Materials · Vol. 9, Issue 2, 2023 · pp. 37–54 Read article
-
Effect of Some Physical Properties on the Swelling Behaviour of Biomass Membranes
Abstract: The membranes of Detarium microcarpum seeds (DMS) and Alfzelia africana seeds (AAS) were developed. The water uptake capacities for DMS and AAS were found to be 500% and 390% respectively. The percentage of water uptake by Detarium microcarpum membrane and Alfzelia africana membrane, both increased with increased in the concentration of DMS and AAS as well as pH. The effect of contact time on water uptake showed that the water …
Published in International Journal of Composite Materials and Matrices · Vol. 2, Issue 2, 2016 · pp. 8–15 Read article
-
Compatibilizing Effect of Modified Polypropylene on the Properties of Polypropylene/Organically Modified Layered Silicate Nanocomposites
Abstract: In the present research paper, a series of polypropylene (PP) nanocomposites containing 3, 5, and 7 wt% of an organically modified layered silicate (OM) were prepared via direct melt mixing in the presence of maleic anhydride grafted polypropylene (indicated as PP-g-MA, PPMA), and hexamethylenediamine-modified maleic anhydride grafted polypropylene (marked as PP-g-HMDA, PPHMDA) as compatibilizing agent at concentration of 10 wt%. Subsequently the influences of the compatibilizer on the morphological, mechanical, …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 1, 2021 · pp. 8–19 Read article
-
Kinetic Modeling and Thermodynamic Study of the Simultaneous Adsorption of Polycyclic Aromatic Hydrocarbons (PAHs) Onto Organomontmorillonite in Aqueous Medium
Abstract: Water is a vital source of human life, but it has frequently been polluted by mono and polycyclic aromatic hydrocarbons, usually from petrochemicals in petroleum industrial effluents as well as other anthropogenic activities. This study investigate the potential of montmorillonite intercalated HDTMAand TMPA cations for effective removal of five (5) different polycyclic aromatic hydrocarbons (PAH) namely: naphthalene, anthracene, chrysene,benzo(a)pyrene and benzo(g,h,i) perylene in aqueous medium. To research PAH adsorption behaviour …
Published in International Journal of Composite Materials and Matrices · Vol. 8, Issue 1, 2022 · pp. 28–38 Read article
-
Sorption of Pb (II), Cd(II) and Zn(II) by synthesized nanocrystalline sodium potassium flurophlogopite (FGP)
Abstract: We have successfully synthesized nanocrystalline sodium potassium fluorophlogopite (FGP) crystals with controlled sizes from ≈ 25 nm to 100nm, using an organic tetrapropylammonium (TPA) hydroxide. We have been successfully synthesized material depends on the source of silicate and hydrothermal crystallization conditions. The synthesized materials were characterized by using different techniques such as X-ray diffraction, Energy Dispersive Analysis, Scanning Electron Microscope, Transmission Electron Microscopy and FTIR analysis. The use of sodium …
Published in International Journal of Composite Materials and Matrices · Vol. 9, Issue 2, 2023 · pp. 41–49 Read article
-
Drag Reduction Annular Flow with Poly Acryl Amide Additive
Abstract: Drag reduction studies have been showed in annular flow with polyacrylamide additive. The percentage drag reduction in annular pipe flow ranges between 85–98% as the diameter increased from 0.02 to 0.033 m. The percentage drag decrease of 89 to 98% is detected as the polyacrylamide concentration is varied from 50 to 200 ppm. The correlation for drag reduction and Reynolds number is presented here under DR = 2.06Re-0.037. Keywords: Drag …
Published in International Journal of Polymer Science and Engineering · Vol. 1, Issue 1-2, 2015 · pp. 1–10 Read article
-
Enhancement of Fire Retardancy Properties of Plywood by Incorporating Silicate, Phosphate and Boron Compounds as Additives in PMUF Resin
Abstract: Wood is one of the supreme sustainable, naturally growing materials that consist principally of combustible organic carbon compounds. Since plywood are widely used now a day especially in buildings, furniture and cabinets. Since the demand of plywood with fire retardancy properties has been increasing over last years, the objective of this study is to improve the fire retardancy of Wood Panel Products by adding Tricresyl phosphate, Di-Sodiumocta Borate and Sodium …
Published in International Journal of Polymer Science and Engineering · Vol. 1, Issue 1-2, 2015 · pp. 11–15 Read article
-
Green Adhesive—Using Glyoxalated Lignin and Hydrogenated Resin as Ecologically Safe Wood Adhesive for Interior Plywood
Abstract: Petroleum-based adhesive such as urea formaldehyde and phenol formaldehyde resin dominates adhesive market which releases formaldehyde and VOC to the environment. The purpose of this study is to develop an adhesive based on isocyanate in combination with compounds from renewable sources like lignin, protein and starch. Adhesive formulation was developed by incorporation of hydrogenated resin, corn starch/PVOH emulsion with glyoxalated lignin (GL) and evaluation properties of the adhesive with plywood …
Published in International Journal of Polymer Science and Engineering · Vol. 1, Issue 1-2, 2015 · pp. 23–27 Read article
-
A Detailed Lumped Model for Vinyl Acetate Emulsion Polymerization
Abstract: Abstract A mathematical model was developed to simulate emulsion polymerization of vinyl acetate monomer in isothermal, batch and semi-batch reactors. The recipe components included monomer (vinyl acetate), initiator (potassium persulfate), surfactant (sodium dodecyl sulfate) and water as the dispersion medium. The two important phenomena, particle nucleation and particle growth, were modeled in adequate detail. The mechanistic details included: particle formation via micellar nucleation; coupling of the radical concentration in the …
Published in International Journal of Polymer Science and Engineering · Vol. 5, Issue 1, 2019 · pp. 1–12 Read article
-
SYNTHESIS, CHARACTERIZATION AND STUDY OF PHOTOCATALYTIC ACTIVITY OF PVA CAPPED ZINC INDIUM SELENIDE NANOPARTICLES UNDER UV LIGHT IRRADIATION USING METHYL RED DYE
Abstract: In this work, we report the structural morphology, optical properties and photocatalytic activity of polymer capped zinc indium selenide nanoparticles, which have been synthesized by solvothermal method. PVA is acted as capping agent. The PVA capped zinc indium selenide nanoparticles were characterized using XRD, SEM with EDAX, AFM, TEM and UV-Vis absorption spectroscopy. The structural properties of PVA capped zinc indium selenide nanoparticles have been characterized by X-ray diffraction (XRD) …
Published in International Journal of Polymer Science and Engineering · Vol. 5, Issue 1, 2019 · pp. 41–51 Read article
-
Viscoelastic Properties of Polymer Nanocomposites with Polydispersity in Nanoparticle Sizes
Abstract: The viscoelastic properties of polymer nanocomposites are investigated as a function of the size distribution of nanoparticles, the nature of interactions and results are compared with the pure polymer melt. We modeled our PNCs with two sizes of nanoparticles and polymer blends and four different cases with different polymer-nanoparticle and nanoparticle-nanoparticle non-bonded interactions. We have observed the enhancement in properties is not only due to the addition of nanoparticles but …
Published in International Journal of Polymer Science and Engineering · Vol. 5, Issue 2, 2019 · pp. 42–52 Read article
-
Review on Effect of Exhaust Gas Recirculation (EGR) on Performance of Compression Ignition (CI) Engine and Homogeneous Charge Compression Ignition (HCCI) Engine
Abstract: Energy conservation is a trending topic in the world. But only saving energy is not the primary aim, there is a need for clean and efficient source of energy to reduce the pollution. Compression ignition engine is the preferred prime movers due to excellent drivability and higher thermal efficiency. Even though it has many advantages, it also has major drawbacks as it produces higher level of NOx and smoke emissions …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 5, Issue 2, 2019 · pp. 11–20 Read article
-
Identification of significant parameters for the production of Jatropha biodiesel using preliminary experimentation
Abstract: The current research work is on Jatropha biodiesel for finding the significant parameters in optimum biodiesel yield. The one factor at a time approach is applied in the esterification. The trans-esterification reaction is used by mixing of Jatropha oil and ethanol in the presence of catalyst KOH. After some time two products are formed a Jatropha biodiesel and a glycerin. The density of glycerin is more as compared to biodiesel. …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 9, Issue 1, 2023 · pp. 1–7 Read article
-
Enhancement in Fuel Efficiency with Magnetised Nano Ferro Particles in Internal Combustion Engines
Abstract: The purpose of the research is to reduce the fuel consumption and increase the material life of an IC engine. The performance of an internal combustion engine can be evaluated in terms of fuel consumption by addition of nano sized ferro particles into cooling water system at varying percentage and magnetizing it with varying magnetic intensity. The experiment was undertaken in a 796 cc, 3 Cylinder petrol engine with a …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 9, Issue 1, 2023 · pp. 40–46 Read article