All articles
7057 articles
-
BER Analysis of Digital Modulation Schemes for OFDM System
Abstract: The growth in the field of communication and the requirement of high-speed and secured data transmission are increasing day by day. Orthogonal frequency-division multiplexing modulation technique is a new technique which supports high-speed data transmission. It is a method of signal modulation that divides a high data rate modulating stream into several slowly modulated narrowband close-spaced subcarriers, and in this way, it is less sensitive to frequency-selective fading. The present …
Published in International Journal of Digital Communication and Analog Signals · Vol. 4, Issue 1, 2018 · pp. 15–23 Read article
-
Analysis and Design of Timber Box Beams Using Vlasov’s Theory
Abstract: ABSTRACT This study was done to derive/obtain the equation of equilibrium of a timber box beam made up of timber (anisotropic material) by using Vlasov’s theory and principle of minimum potential energy. A comparative analysis of the theoretical results obtained was done by the analysis of timber box beams using the development and the experimental results of the same box beams. The results obtained were found to co-relate even when …
Published in International Journal of Construction Engineering and Planning · Vol. 4, Issue 2, 2018 · pp. 8–15 Read article
-
The Role of Off-Site Construction Technology in Building Construction Industry
Abstract: ABSTRACT The purpose of this study is to display the role of off-site method of construction technology. On this research, descriptive case study method was employed. Both primary and secondary data sources were utilized, in which primary data were collected through personal interview, desk study, questionnaires and field observation and secondary data were collected from different documents and sources. The findings showed that, off-site construction has a great role on …
Published in International Journal of Construction Engineering and Planning · Vol. 4, Issue 2, 2018 · pp. 16–21 Read article
-
Enhanced Artificial Senses in Human The Smart Nose
Abstract: Human senses play a prominent role in one's everyday life, and it is the most basic function anyone can have in them. Not just humans but even animals have these sense, in fact we know that some animals like dogs and elephants have better sensing abilities than humans. It would have been fascinating if humans had better sensing abilities than dogs and could have been less dependent on animals in …
Published in International Journal of Microelectronics and Digital integrated circuits · Vol. 4, Issue 1, 2018 · pp. 1–7 Read article
-
Simulation Models for Flexural and Compressive Strength of Concrete Using Waste Glass as Partial Replacement.
Abstract: The research present the usefulness of waste glass in the production of grade 20 concrete using partial replacement levels of 0%, 20%, 40% and 60%, respectively, for coarse glass and fine glass to coarse aggregate and fine sand aggregate. The results obtained indicate that, for the purpose of construction works, 20% replacement should be adopted either for coarse glass or fine glass replacement. Simulation models were established to predict flexural …
Published in International Journal of Construction Engineering and Planning · Vol. 4, Issue 2, 2018 · pp. 1–7 Read article
-
Vernacular Hill Architecture: Sumari, Uttarakhand
Abstract: After the floods on July 2013 in Uttarakhand, the main focus is on sustainable resettlement of flood affected people. In order to propose a comprehensive redevelopment scheme the first step is to comprehend the housing requirements and socio-cultural implications associated to housing. This paper aims to give a better understanding of the prevalent housing tradition in vernacular hill settlement on the basis of a case study. The research examines the …
Published in International Journal of Housing and Human Settlement Planning · Vol. 4, Issue 1, 2018 · pp. 53–58 Read article
-
Graphene Thin Film: Proposing as Active Layer in Solar Cells
Abstract: Solar cells are the need of today’s world due to its different advantages like renewable energy source, no toxic gases produce, i.e. environment friendly, etc. To synthesize and enhance the performance of solar cells, various different technologies are used. Different materials and different structures are used by the researcher to improve the solar cell technology. Research works give more attention towards this, because this technology opens up the new window …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 4, Issue 1, 2018 · pp. 30–45 Read article
-
Design and Fabrication for Power Generation using Maglev Turbine
Abstract: This study represents about the history and global scenario of development of power generation. Indian scenario of power generation explained through tables and graph. Brief discussion about the Maglev turbine. Methodology and selection of turbine also discussed and presents the designs and fabrication of Maglev Turbine which is further used for power generation. In this paper, it is explained that miniature maglev turbine is divided in different sections to understand …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 4, Issue 1, 2018 · pp. 40–52 Read article
-
A Review Study of Steady State Thermal Analysis of Piston by Finite Element Method (FEM)
Abstract: This study explains with the previous literature survey that indicates about the inner combustion engine constituents like piston. The piston transports the energy of the burnt gasses from mechanical energy. The piston translates inside the cylinder liner or sleeve. The present effort is to study about the design of piston petrol engine. Computer aided engineering apparatus allows engineers to improve product and to pretend these designs for residual stress, structural …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 4, Issue 1, 2018 · pp. 34–39 Read article
-
Nanotechnology: An Antidote for Alzheimer's Disease
Abstract: Alzheimer's disease (AD) is a type of dementia that causes problems with memory, thinking and behaviour. Symptoms usually develop slowly and get worse over time, becoming severe enough to interfere with daily tasks. This article describes different stages of AD along with how it is different from other memory loss issues. Every old-age-related memory loss cannot be AD. Nanotechnology is an emerging branch of science which deals with matter at …
Published in International journal of Nanobiotechnology · Vol. 4, Issue 1, 2018 · pp. 19–27 Read article
-
To study the Properties of Bio Synthesized Silver Nanoparticles
Abstract: Recently colloids silver nanoparticles have attained much attention in global nanotechnology market due to valuable application for catalytic, biomedical, electronics and widely as Antimicrobial agents. In the present work author have synthesized and characterized the Colloids silver nanoparticles with three biosynthesis methods and the detail characterization of particle has been done by UV–Visible spectroscopy, AFM, FTIR, and with DLS techniques. Particles formation was conformed from UV spectra of nanoparticles. Size …
Published in International Journal of Applied Nanotechnology · Vol. 4, Issue 1, 2018 · pp. 34–40 Read article
-
Methodologies and Bioengineering Applications of Microfluidic Laboratory-on-a-Chip Systems
Abstract: Any microchannel has at least one of the height, width, diameter or length having the dimension of less than one millimeter. Microfluidics is the subject dealing with the movements of liquid or gas inside the microchannels. The principles of microfluidics are highly used in the microfluidic lab-on-a-chip systems to achieve the desired operation. In the last few years, the microfabrication methodologies are highly improved to fabricate the microfluidic lab-on-a-chip systems …
Published in International Journal of Embedded Systems and Emerging Technologies · Vol. 4, Issue 1, 2018 · pp. 1–3 Read article
-
An Analysis on the Current Perspective of Urban Design
Abstract: We know that urban design is historically played a major role in development of cities. Urban design, as a presently discipline, is relatively new compared to linked disciplines of architecture, urban planning, and landscape architecture. The close relation of urban design with these allied disciplines has also been the cause for its unclear nature, and its muddled definition. Accordingly, it is appealed here that a reexamination of the definition, status, …
Published in International Journal of Town Planning and Management · Vol. 4, Issue 1, 2018 · pp. 42–48 Read article
-
Modified E and W Shape Antenna Designs to Boost Wireless Signals
Abstract: Research article presents E-shaped antenna in wireless communication. GA Algorithmic procedure has been implemented with enhancement. The Enhanced GA procedure increases bandwidth. Method of Movement (MOM) has been employed on 1.8–2.6 GHz for carrying out optimization. Fuzzy approach has been taken up in recombination of next generation antenna development. GA procedure assist in enhancing design of E shape antenna. A miniature model antenna for frequencies ranging from 1.8 to 2.37 …
Published in International Journal of Microwave Engineering and Technology · Vol. 4, Issue 1, 2018 · pp. 42–47 Read article
-
Denial of Service Attacks in Wireless Networks
Abstract: During the past decade, the speed and reliability of communication over wireless network have been increased severely. One region of great interest in distributed system is wireless network that allows collaboration in real time. Wireless networks allow user to communicate and transfer data with each other without any wired medium between them. Denials of service attacks are really dangerous in wireless systems. This paper provides a survey of these attacks.
Published in International Journal of Broadband Cellular Communication · Vol. 4, Issue 1, 2018 · pp. 34–39 Read article
-
Comparative Study of Machining Parameters on Electrical Discharge Machining of Inconel 718 using Copper and Copper- Tungsten Electrode.
Abstract: The present scenario in all the manufacturing industries is to make a priority list to cope up the challenges imposed by the superior materials like alloys, ceramics and composite materials which have difficulty for machining. In this study, comparison of experimental results which is found by optimization of machining parameters on material removal and tool wear rate along with two different electrodes material such as copper and copper tungsten for …
Published in International Journal of Metallurgy and Alloys · Vol. 4, Issue 1, 2018 · pp. 1–8 Read article
-
A Comparative Study on the Development Milestones and the Health of Toddlers (1–3 Years) in Urban and Rural Community of Ludhiana, Punjab
Abstract: Toddler hood is difficult exiting interesting period of life. Developmental milestone are a set of functional skills or age-specific tasks that most children can do at a certain age range The Study sample was 500 toddlers aged 1–3 year was selected 250 from urban and 250 from almost equal number of male and female toddlers. A modified conceptual frame work of the study was based on the Callista Roy Adaptation …
Published in International Journal of Pediatric Nursing · Vol. 4, Issue 2, 2018 · pp. 1–13 Read article
-
A Review Study on the Development of a City into a Smart City
Abstract: Today’s industrial environments are moving toward automation. This results in improving item quality, accuracy, productivity and to diminish item cost. Error identification of products is an exceptionally troublesome modern process. Persistent manual detection generates consistency issues. The purpose of this project was to design and fabricate a working prototype for an automatic error detector machine. It demonstrates the idea of an ordinary conveyor belt, but with some intelligence. This main …
Published in International Journal of Town Planning and Management · Vol. 4, Issue 1, 2018 · pp. 35–41 Read article
-
Experimental Investigations on a Diesel Engine Fueled with Biodiesel Blends and Diethyl Ether as an Additive
Abstract: Blends of bio-diesel (or diesel) are fueled for engines (diesel) though direct injection by a single cylinder at various (or multiple) propagations. The determination of the emissive power and the performance of the engine is done. The emission of the NOx is considerably high when compared to the diesel fuel operation (considering all the blends). Blends are added with the diethyl-ether at various proportions. Reduction of NOx emission at the …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 4, Issue 1, 2018 · pp. 25–33 Read article
-
Pumping Fluid Using Pendulum Device
Abstract: In this study, we have designed a system for pumping water with minimum head. It wills helpful for deliver water or other fluid. For pumping, we can use hydraulic system and pendulum which is used to power the pumping and suction of the fluid from specific suction head and delivery head. Pendulum will rotate by using tension force of plate fitted at both side of the pendulum, which plate provides …
Published in International Journal of Mechanics and Design · Vol. 4, Issue 1, 2018 · pp. 35–39 Read article