Search
136 articles for “L-scan”
-
Synthesis of Nano-ZnO by Chemical Method and its Characterization
Abstract: Nanocrystals of ZnO were prepared by chemical method using Zn (II) acetate and potassium hydroxide as the starting materials and methanol as solvent. The material was characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), electron diffraction analysis (EDS), UV-Visible spectroscopy, Dynamic light scatteringanalysis (DLS) and Fourier transform spectroscopy (FTIR) techniques. The results indicated that the obtained ZnO material was in nano-dimension and possessed pure …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 8, Issue 1, 2022 · pp. 13–18 Read article
-
A Comprehensive Characterization of Zinc Chloride: Unveiling its Role as a Hygroscopic Preservative and Drying Agent through Elemental, Structural, and Morphological Analysis
Abstract: This study presents a detailed investigation of Zinc Chloride( )) utilizing the following different analytical techniques, X-ray diffraction(XRD), Electron Dispersive Spectroscope (EDS), Transmission Electron Microscope (TEM), Scanning Electron Microscope (SEM). Zinc Chloride was synthesized using the hydrothermal method. The elemental, structural, morphological, and optical properties of Zinc Chloride ( )) were thoroughly analyzed. The hygroscopic nature and properties of Zinc Chloride upon exposition to air was revealed and its weight/mass …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 9, Issue 2, 2023 · pp. 13–19 Read article
-
Induced codeposition of Ni-W alloy coatings using glycerol as additive and their characterization
Abstract: As a promising coating material to replace hard chromium coating, the development of nickel–tungsten (Ni-W) alloy coatings of good corrosion protection is of great interest in surface coating technology. Further, the effect of plating variables, including additive on the composition of alloys of induced co-deposition is more vagarious than in other types of alloy deposition. In this regard, an alkaline citrate bath has been formulated for electrodeposition of Ni-W alloy …
Published in International Journal of Chemical Engineering and Processing · Vol. 2, Issue 2, 2016 · pp. 1–9 Read article
-
Effect of nano Aluminum on Thermal Behavior and Ignition Characteristics of Al/KClO4 Thermite Composition
Abstract: Ignition experiments of micron size Al/KClO4 (ALCLO) thermite composition was carried out at high heating rate (40°C/min.) using DTA (differential thermal analysis), and it was observed that no ignition took place up to 700°C. Similarly in case of STA (simultaneous thermal analyzer) experiments, no ignition peaks were found up to 1100°C at 20/min. ALCLO when ignited in a bomb calorimeter for heat of combustion output measurement it produced a large …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 5, Issue 2, 2019 · pp. 9–19 Read article
-
Seaweed Mediated Biosynthesis of Silver Nanoparticles Using Gracilaria fergusonii J.Ag. Collected From Hare Island, Thoothukudi in the South East Coast of Tamil Nadu, India
Abstract: In the present study silver nanoparticles were synthesized using the aqueous extract of red seaweed Gracilaria fergusonii J.Ag. as the reducing agent. The formation of silver nanoparticles was confirmed by colour change from light yellow to dark brownish red, UV– visible spectroscopy, FT-IR, X-ray diffraction method (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray microanalysis spectroscopy (EDS). The anoparticles showed an absorbance at 442 nm on UV–visible spectroscopy. The …
Published in International Journal of Plant Biotechnology · Vol. 1, Issue 1-2, 2015 · pp. 50–57 Read article
-
Tailoring Electrolytic Deposition of Zn-Ni Alloys for Superior Corrosion Resistance in Harsh Environments
Abstract: Since Zn–Ni alloy coatings are more resistant to corrosion than pure zinc coatings, they are being researched extensively. In this study, Zn–Ni alloy coatings electrolytically deposited from an acidic sulfate bath are investigated. The study looks into how the microstructure, phase composition, and corrosion resistance of the coatings are affected by deposition factors like pH, current density, and electrolyte composition. X-ray diffraction (XRD), potentiodynamic polarization, and scanning electron microscopy (SEM) …
Published in International Journal of Chemical Engineering and Processing · Vol. 11, Issue 1, 2025 Read article
-
Green approach for the synthesis of Titanium dioxide nano particles and their characterization
Abstract: The ecofriendly and sustainable method of green synthesis of nanoparticles gained a lot of popularity these days. Azadirachta indica (neem) leaves are used in this study to identify the eco friendly synthesis of titanium dioxide nanoparticles (TiO 2 NPs). TiO 2 NPs can be easily and sustainably synthesized from titanium precursors using neem leaves having bioactive compounds. Green production of TiO 2 NPs is facilitated by the stabilizing and capping …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 11, Issue 1, 2026 · pp. 50–58 Read article
-
Potato Starch-Based Composites for Industrial Application
Abstract: Plastic has become an essential element in our daily life. Plastics derived from polyolefins such as polyethylene are currently used in plastic film for food wrapping, garbage bags, mulching, compost bags, and many more. These plastics are typically inactive and resistant to microbial attack and hence they remain in nature for a long time without any deformation and has a harmful effect on atmosphere. Biodegradable plastics can help solve this …
Published in International Journal of Composite and Constituent Materials · Vol. 8, Issue 2, 2022 · pp. 1–12 Read article
-
Effect of Cutting Parameters in Hard Turning on Chip Formation and Machined Surface
Abstract: Cost effectiveness, increasing demand, high production rates and reliability of the product have increased the potential of industrial application of hard turning technology during the past few years. Grinding operation for hard steel component reduces the machining sequence, the machining time and the specific cutting energy. Hard turning also shows effects like generation of high temperature, the formation of saw toothed chips. In this thesis, experimental investigation is conducted in …
Published in International Journal of Manufacturing and Materials Processing · Vol. 2, Issue 1, 2016 · pp. 28–47 Read article
-
Synthesis and Characterization of Magnetite-Pectin-Alginate Hybrid and Bionanocomposite
Abstract: It is a one pot synthesis of hybrid bionanocomposite comprising of inorganic magnetite with stabilizer biopolymer pectin and alginate in co-precipitation method using sodium hydroxide and ammonium hydroxide as precipitating agents. A lot of comparison and investigation has been done in particle size of nanocomposite by changing the stoichiometric ratio of both magnetite and biopolymer concentration and drying condition of composite. The nanocomposite has been characterized using infrared spectroscopy (FTIR), …
Published in International Journal of Applied Nanotechnology · Vol. 3, Issue 1, 2017 · pp. 18–22 Read article
-
International Journal of Manufacturing and Materials Processing
Abstract: Friction and wear resistance were studied on SiC-based novel ceramic composite for applications in advanced automotive braking systems. In the present work, SiC-based ceramic composite was prepared by solid-state reaction synthesis route using a fine powder of precursors. The product was investigated for wear rate under different load conditions in the range from 10N to 70N and speed conditions in the range from 0.13 m/s to 0.52 m/s. The present …
Published in International Journal of Manufacturing and Materials Processing · Vol. 7, Issue 1, 2021 · pp. 14–24 Read article
-
Bluetooth Technology for Detecting the Quality of Water
Abstract: Water quality monitoring system can measure various parameters of water quality, such as temperature, pH, conductivity and the turbidity. These parameters are used to detect water contaminants. The traditional technique of scanning the water high-quality is to accumulate tests of water manually and transport to the lab to check and examine. This approach is time consuming, wastage of man energy and no longer most economical. The water quality measuring gadget …
Published in International Journal of Digital Communication and Analog Signals · Vol. 6, Issue 1, 2020 Read article
-
Green Synthesis of Silver Nanoparticles using Aqueous Leaf Extract of Artabotrys odoratissimus R.Br.
Abstract: In the present study silver nanoparticles were synthesized using the aqueous leaf extract of Artabotrys odoratissimus R.Br. as the reducing agent. The formation of silver nanoparticles was confirmed by colour change from light yellow to dark brownish red, UV-Visible Spectroscopy, FTIR, X-Ray Diffraction Method (XRD), Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray microanalysis spectroscopy (EDS). The nanoparticles showed an absorbance at 475.5nm on UV-Visible spectroscopy. Fourier Transform Infra-Red (FTIR) …
Published in International Journal of Applied Nanotechnology · Vol. 4, Issue 1, 2018 · pp. 5–11 Read article
-
Biosynthesis of silver nanoparticles using aqueous leaf extract of Muntingia calabura Linn.
Abstract: The present study was focused to synthesis silver nanoparticles using the aqueous leaf extract of Muntingia calabura L. as the reducing agent. The formation of silver nanoparticles was confirmed by colour change from light yellow to dark brownish red, UV-Visible Spectroscopy, FT-IR, X-Ray Diffraction Method (XRD), Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray microanalysis spectroscopy (EDS). The nanoparticles showed an absorbance at 443nm on UV-Visible spectroscopy. The presence of …
Published in International journal of Nanobiotechnology · Vol. 4, Issue 1, 2018 · pp. 9–15 Read article
-
Amorphous Carbon Nanotube-MoS2 Nanohybrids : A New Future Material in the Application of Battery, Supercapacitor and Field-emission Display Devices
Abstract: The discovery of graphene make the researcher interested towards the other two-dimensional material which has quite similar properties like graphene. Among them, MoS2 nanosheets has extraordinary optoelectronic and physical properties. It has several applications in developing battery, sensor, optoelectronic device etc. On the other hand, amorphous carbon nanotube can be synthesized by using a low temperature chemical process. Due to the easy processing of amorphous carbon nanotube (ACNT), good optoelectronic …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 5, Issue 2, 2019 · pp. 36–45 Read article
-
A Study on Mechanical Properties and Fracture Behavior of Chopped Fiber Reinforced Self-Compacting Concrete
Abstract: The development of self-compacting concrete (SCC) is innovatory landmark in the history of construction industry resulting in predominant usage of SCC worldwide nowadays. It has many advantages over normal concrete in terms of enhancement in productivity, reduction in labor and overall cost, excellent finished product with excellent mechanical response and durability. Further, incorporation of fibers enhances its properties specially related to post crack behavior of SCC. Hence, the aim of …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 1, 2017 · pp. 90–122 Read article
-
Brain Tumor Detection using Machine Learning Methods-KNN, SVM, DT, RF
Abstract: Brain tumor is a major contributor to illness and death worldwide, and timely diagnosis is essential for successful treatment and improved outcomes Recent research has looked into the possibility of machine learning algorithms for detecting and classifying brain tumours in medical pictures. In this study, four commonly used machine learning algorithms (K-Nearest Neighbours, Decision Trees, Support Vector Machines, and Random Forests) were evaluated for their effectiveness in brain tumor detection. …
Published in International Journal of Chemical Engineering and Processing · Vol. 9, Issue 2, 2023 · pp. 48–59 Read article
-
Three Dimensional (3D) Structure and Morphology ofCarbon Fibers from X-Ray Microscopy (XRM) Analysis†
Abstract: X-ray microscopy is an elegant chemical imaging technique that bridges the gap between lightmicroscopy and electron microscopy. Vital information on the chemical state (valency, surfacefunctionality), chemical composition, three-dimensional (3D) chemical structure (order, disorder,rupture), and chemical imaging can be obtained from X-ray microscopy. In the current originalresearch article, X-ray microscopy is used as a characterization tool to examine the microstructuralfeatures of commercial carbon fibers. Pitch-based (NX100) and polyacrylonitrile (PAN)-based(T700SC) CFs chosen …
Published in International Journal of Composite Materials and Matrices · Vol. 10, Issue 2, 2024 · pp. 23–32 Read article
-
A Study on Raspberry Pi Method for Examining Personal Cloud Storage
Abstract: The guide explains ways to set up a personal cloud storage using a Raspberry Pi rather than using storage facilities from other companies like Dropbox, Google Drive, iCloud, and so on. In this dynamic environment and ever-changing technologies, security of our data is utmost important as well as the storage we need to store data and have control over our data. We focus on the matters mentioned above. The fact …
Published in International Journal of Distributed Computing and Technology · Vol. 9, Issue 1, 2023 · pp. 26–35 Read article
-
Reflection of Modern Style in Residential Interiors
Abstract: Reflection of Modern Style in Residential interiors design is a synthesis of art, architecture, design, lifestyle and society. The advantages of the Bauhaus design school are the developer of modern style in interior design. Modern interior design trends include Scandinavia and minimalism, industrialism and industrial design. It focuses on simplicity, functionality and comfort. In addition, the visual effects created by different object textures and texture variations help achieve an even …
Published in International Journal of Architecture and Infrastructure Planning · Vol. 9, Issue 1, 2023 · pp. 48–62 Read article