Search
166 articles for “Tensile strength”
-
Organically Modified Peanut Shell Flour-Reinforced Polypropylene Nanocomposites: Effect of Fiber Surface Treatment on Basic Properties
Abstract: Innovative composite ingredients are increasingly being used, particularly in the automotive, aerospace, aviation, and construction industries. Due to the remarkable properties of nanocomposite components, traditional ingredients are being replaced. This study's work focuses on the usage of polypropylene (PP) as polymer matrices and nanoclay and peanut shell flour (PSF) as reinforcing materials. To enhance the mechanical properties of the PP/PSF composites in the present work, PSFs were treated using sodium …
Published in International Journal of Analytical and Applied Chemistry · Vol. 8, Issue 2, 2022 · pp. 19–30 Read article
-
Study of the Effect of Water Retarding Concrete Admixtures on the Properties of Concrete
Abstract: Water retarding concrete admixtures and super plasticizer are extensively utilized to recover the structural and mechanical properties of fresh and hardened concrete. These admixtures are more regularly used in pre-stressed concrete, slim components with overfilled and densely filled reinforcement, beams and slabs pre-cast basics and long slender column. In current decades, marvelous success has been attained in the progression of chemical admixtures for Portland cement. Most efforts have concentrated on …
Published in International Journal of Construction Engineering and Planning · Vol. 4, Issue 1, 2018 · pp. 10–14 Read article
-
Scrap Steel Fiber Reinforce Concrete
Abstract: The research mentioned on this paper turned into finished to look at the feasibility of the usage of metal scrap received from lathe system in fiber bolstered concrete via way of means of checking the compressive strength, and flexural strength of M20 concrete and consequently optimizing the fiber proportions. In this look at, a contrast has been made among undeniable cement concrete and metal scrap fiber bolstered concrete (SSFRC). The …
Published in International Journal of Concrete Technology · Vol. 7, Issue 2, 2021 · pp. 30–38 Read article
-
Fabrication and Study of Natural Plant Fiber Reinforced Polymer Composites
Abstract: Snake grass fiber (sansevieria trifasciata fiber, STF)-strengthened polypropylene (PP) based composites (30 wt% by fiber) was made by hot press technique. STFs were modified by ultraviolet (UV) rays and the composites they produced were evaluated. Optimized STFs were again modified with monomer using UV rays to progress the mechanical features of the composites. Monomer concentration and no. of UV rays were optimized in terms of grafting and mechanical features of …
Published in International Journal of Polymer Science and Engineering · Vol. 7, Issue 1, 2021 · pp. 11–22 Read article
-
Sustainable Cementitious Composites withEpoxy–Alccofine Synergy
Abstract: This research examines the combined influence of epoxy resin and Alccofine when used as partial substitutes for cement in producing sustainable, high-performance concrete. The study aims to improve both strength and durability properties while simultaneously reducing cement usage and its environmental impact. Concrete mixes were prepared with epoxy resin contents of 0%, 5%, and 10% by weight of cement, along with Alccofine replacement levels of 5%, 10%, and 15%. The …
Published in International Journal of Concrete Technology · Vol. 12, Issue 2, 2026 · pp. 1–12 Read article
-
Fresh and Hardened Properties of High Performance Concrete with Weld Slag as Fine Aggregate
Abstract: This research centers on the incorporation of welding slag, the residue remaining after the welding process, as fine aggregates in the production of high-performance concrete with a compressive strength of 70 MPa. The chemical and physical characteristics of welding slag aggregates (WSA), such as chemical compositions, specific gravity, SEM images, XRD, and EDS analysis, were investigated. Additional investigations were carried out by substituting welding slag with standard sand at varying …
Published in International Journal of Construction Engineering and Planning · Vol. 9, Issue 2, 2023 · pp. 29–36 Read article
-
Investigation of strength of concrete by replacement of sand with copper slag and cement with sugarcane bagasse ash
Abstract: This investigational study conducted to observe the potential of Sugarcane Bagasse Ash as a cement replacing material which is similar to that of Portland Pozzolana Cement and Copper slag as a fine aggregate replacement material. Seven different concrete mixes with the Bagasse Ash replacement to the Portland Pozzolana cement and copper slag replacement are (5% + 40%, 10% + 15% , 10% + 25% , 10% + 35% , 10% …
Published in International Journal of Concrete Technology · Vol. 5, Issue 1, 2019 · pp. 25–38 Read article
-
Application of Fly Ash and Lime as Partial Replacement of Cement in Concrete
Abstract: Concrete as a construction material plays a significant role in infrastructures development in the world. The main constituents of concrete are cement, fine aggregate, coarse aggregate, and water. Production of cement has been emitting a huge amount of carbon dioxide in the atmosphere. Hence causing environmental pollution. Amount of fly ash generation has been increasing day by day which has also been damaging the environment in the form air, water …
Published in International Journal of Concrete Technology · Vol. 9, Issue 1, 2023 · pp. 41–45 Read article
-
A STYDY ON MECHANICAL PROPERTIES UNDER THE INFLUENCE OF FELDSPAR ACTIVATOR ON GEOPOLYMERIZATION OF REDMUD AND GGBS
Abstract: It is well known fact that the Ordinary Portland Cement (OPC) is most important construction material. Keeping in view the hazardous effects of Portland cement on environment, efforts are being put to reduce use of cement in concrete with its partial or full replacement by various waste materials such as Red mud (RM), Ground Granulated Blas Furnace Slag (GGBFS or GGBS), Flyash, Silica fume etc.. Geopolymer Concrete (GPC) is a …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 5, Issue 1, 2019 · pp. 1–8 Read article
-
Physical Property of Self-Curing Concrete With Shrinkage Reducing Agent
Abstract: Water is a most widely used material for construction work, it is essential for concreting work or plastering work, etc. Curing is the process for controlling the temperature and consists of moisture movement from and into the concrete and the hydration of the cement and consequently continuous increase in the strength and Curing allows continuous hydration of cement, when curing stops strength increasing of the concrete also stops. The aim …
Published in International Journal of Water Resources Engineering · Vol. 3, Issue 1, 2017 · pp. 29–33 Read article
-
Green Adhesive—Using Glyoxalated Lignin and Hydrogenated Resin as Ecologically Safe Wood Adhesive for Interior Plywood
Abstract: Petroleum-based adhesive such as urea formaldehyde and phenol formaldehyde resin dominates adhesive market which releases formaldehyde and VOC to the environment. The purpose of this study is to develop an adhesive based on isocyanate in combination with compounds from renewable sources like lignin, protein and starch. Adhesive formulation was developed by incorporation of hydrogenated resin, corn starch/PVOH emulsion with glyoxalated lignin (GL) and evaluation properties of the adhesive with plywood …
Published in International Journal of Polymer Science and Engineering · Vol. 1, Issue 1-2, 2015 · pp. 23–27 Read article
-
High Strength Concrete (M40) Using Micro Silica and Steel Fiber
Abstract: Abstract: This experimental study examines the combined effects of micro silica (silica fume, SF) as a partial cement replacement and hooked-end steel fibers on the mechanical properties of M40 grade concrete. Concrete mixes were designed as per IS:10262 with a target characteristic compressive strength of 40 MPa. Silica fume was incorporated at 0%, 5%, 10%, and 12% by weight of cement, while steel fibers (aspect ratio ~50) were added at …
Published in International Journal of Construction Engineering and Planning · Vol. 12, Issue 1, 2026 · pp. 53–57 Read article
-
Potential Use of Waste Marble Fine in Concrete
Abstract: In India waste is producing in large amount from cutting and dressing industries of stone. This waste creates the problem for surrounding area as well as human being. Keeping such as issues in mind an experimental work was conducted on concrete by using marble waste (MW). Marble waste (MW) 5%, 10%, 15%, 20% and 25% was added as filler. To examine the fresh properties of concrete slump test of workability …
Published in International Journal of Concrete Technology · Vol. 8, Issue 2, 2022 · pp. 31–38 Read article
-
Mechanical Behavior of Calotropis Gigantea FruitBunch Fiber-Epoxy Composites
Abstract: Global warming solutions in the modern era are centered on substituting environmentally friendly biodegradable materials for fossil fuels to slow down the rate at which they are being depleted. The study literature supports the use of substitute materials for plastics in the creation of composite materials, and this work envisions the use of Calotropis gigantea fruit bunch fiber as one such substitute material. Since Calotropis gigantea fruit bunch fiber is …
Published in International Journal of Composite Materials and Matrices · Vol. 10, Issue 2, 2024 · pp. 45–58 Read article
-
Mechanical and Microstructure Properties of Al and SiC Reinforced Aluminum-Based Metal Matrix Composite
Abstract: It is becoming increasingly difficult to design new technical materials that are resistant to wear damage and corrosion degradation in severe service circumstances. Unfortunately, even with crucial passive metals, like Al alloys, there is often a compromise between wear and corrosion resistance. Because of the unfavorable galvanic connection between the precipitates and the matrix, precipitates not only harden the material but also accelerate corrosion. This research established that a supersaturated …
Published in International Journal of Metallurgy and Alloys · Vol. 11, Issue 1, 2025 · pp. 26–43 Read article
-
Review of Partial Replacement of Cement with Metakaolin and Utilization of M-Sand, Alongside Addition of Steel Fiber, in the Construction Industry
Abstract: In this contemporary context, demands placed on concrete have escalated significantly. Variousessential properties of concrete such as strength, durability, workability, and expected service liferequire enhancement. This work focuses on investigating the strength properties of concrete throughdifferent substitutions of cement with metakaolin (MK), manufactured sand (M-sand), and steel fiber.Tests were conducted in accordance with Bureau of Indian Standards guidelines to assess thesuitability of MK as a cement replacement. Steel fiber was …
Published in International Journal of Construction Engineering and Planning · Vol. 10, Issue 1, 2024 · pp. 26–30 Read article
-
Innovative Concrete Composites: Assessing Mechanical Strength with Fly Ash, Glass, and Granite Waste Incorporation
Abstract: Waste management poses a significant challenge for countries in both current and future contexts. The generation of solid waste from various industries, such as stone, glass, coal, and tires, constitutes a major issue in India, leading to significant environmental and health concerns for the surrounding population. This study addresses these challenges by exploring the utilization of waste granite and glass powder as materials to replace sand and cement, respectively, with …
Published in International Journal of Construction Engineering and Planning · Vol. 9, Issue 2, 2023 · pp. 37–45 Read article
-
Effect of Colloidal Nanosilica on High Strength Rice Husk Ash Concrete
Abstract: Nowadays, supplementary cementitious materials (SCMs) are used in concrete because it reduces CO2 emission during. The husks, which are production of cement, reduces cement contents, improve workability, increase strength and enhance durability. Pozzolanic reaction takes place when siliceous or aluminous material comes in contact with calcium hydroxide in the presence of moisture to form compounds possessing cementitious properties approximately 50 percent cellulose, 30 percent lignin and 20 percent silica, are …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 33–43 Read article
-
Compressive Behaviour of Lightweight Aggregate Concrete by Blending LECA
Abstract: Present work deals with the lightweight aggregate concrete (LWAC) by using Lightweight Expanded Clay Aggregate (LECA) as lightweight aggregate, LECA is used as replacement to the natural coarse aggregate in the concrete, in this experimental work percentage of lightweight aggregates are varied to study the change in the properties of concrete made by blending LECA. LECA content was varied from 20% to 100% at an increment of 20%. Total 6 …
Published in International Journal of Concrete Technology · Vol. 5, Issue 2, 2019 · pp. 10–15 Read article
-
Experimental Study on Partially Replacement of Fine Aggregate & Coarse aggregate by Waste Marble with addition of S-Fiber
Abstract: Today’s world is a concrete jungle. With the ever increasing population of the world, in general and the developing countries there is the tremendous pressure on the Civil Engineer to develop a cost effective as well as ecofriendly structure to fulfill the need of the human being. Concrete is a heterogeneous mixture of binding material (cement or lime), coarse aggregates, fine aggregates (sand) and water. Fine and coarse aggregates are …
Published in International Journal of Concrete Technology · Vol. 5, Issue 2, 2019 · pp. 1–9 Read article