Search
1085 articles for “Samples”
-
Porous Silicon and its Nanoparticles: A Theoretical Study
Abstract: It is very simple and cost consuming technique of fabrication of porous silicon film over silicon substrate and synthesizing the porous silicon and silicon nanoparticles. The etch reactions in RIVPSE process forms the porous structures without need of complex and expensive equipments. The luminescent porous film can be fabricated using this sample technique with any cost effecting methods such as extra energy excitation like plasma or ultraviolet photon and additional …
Published in International Journal of Applied Nanotechnology · Vol. 5, Issue 1, 2019 · pp. 14–18 Read article
-
Impact of Substrate Temperature on Chemically Deposited Cds Thin Films
Abstract: The interest for renewable energy sources are increasing day by day due to the limited availability of fossil fuel. Among all the renewable energy sources solar energy is growing interest due to its easy availability almost among all area of earth where people lives. Solar energy can be used as a source of energy by two ways: Solar Photovoltaic Cell and Solar thermal. Photovoltaic cells are the easiest way for …
Published in International Journal of Energetic Materials · Vol. 1, Issue 1, 2015 · pp. 22–26 Read article
-
Effect of Sulphamic acid on the growth of Glycine single crystals
Abstract: Sulphamic acid added glycine single crystals were grown successfully by slow-evaporation technique.A single crystal with well defined crystal was obtained. The lattice parameters and crystal system of the grown crystals were confirmed by single crystal and powder x-ray diffraction analysis.The functional groups present in the sample were identified by FTIR spectral analysis.The lower cut off wavelength and bandgap energy of the grown crystal was analysed from uv-vis spectral analysis. Keywords: …
Published in International Journal of Energetic Materials · Vol. 5, Issue 1, 2019 · pp. 9–13 Read article
-
2-D ELECTRICAL RESISTIVITY TECHNIQUE FOR GROUNDWATER EXPLORATION IN IKERE – EKITI, NIGERIA
Abstract: The electrical resistivity techniques become one of the most widely used geophysical survey methods. Electrical resistivity method has been applied to various fields like groundwater and subsurface resource exploration. In the past, electrical resistivity was used in engineering, environmental and archaeological purposes. Its reliability depends on the expert interpretation skills of geophysicist. Applicable technique in groundwater exploration like electrical resistivity method which complement with existing conventional method will produce comprehensive …
Published in International Journal of Energetic Materials · Vol. 5, Issue 1, 2019 · pp. 1–8 Read article
-
OPTIMIZING MAGNETIC BEHAVIOR OF NANO-CRYSTALLINE CO2CrAl TYPE HEUSLER ALLOY POWDER USING RESPONSE SURFACE METHODOLOGY
Abstract: In the present work, Co2CrAl heusler alloy powder prepared successfully from premix basic powders of Cobalt (Co), Chromium (Cr) and Aluminium (Al) in stoichiometric of 60Co-26Cr-14Al (weight %) by novelistic mechano-chemical route. Mgnetic properties of mechanically alloyed powders were characterized by vibrating sample magnetometer (VSM). The performed experiment has been designed on the basis of 2 factor 5 level response surface methodology. Experimental results were used to develop a mathematical …
Published in International Journal of Energetic Materials · Vol. 6, Issue 1, 2020 · pp. 7–13 Read article
-
Study on Metal Corrosion in Soil Environment of Edo State in Niger Delta Area, Nigeria
Abstract: Impact of sandy soil obtained in Edo State on metal corrosion was investigated having in mind that corrosion of metal is an issue of concern as well as has been a major problem in various fields of engineering operation, particularly in environment of Niger Delta area of Nigeria. Experimental approaches were conducted to examine metal corrosion in soil of selected environment of Edo State in Niger Delta area of Nigeria. …
Published in International Journal of Energetic Materials · Vol. 6, Issue 2, 2020 · pp. 37–48 Read article
-
Comparative Study of Oil Palm Fibre for Effective Remediation of Crude Oil in a Contaminated Soil
Abstract: Comparative study was conducted on two different oil palm fibre effectiveness on degradation of crude oil contaminated loamy soil. The method of X-ray fluorescence spectrometer (GC) was applied for crude oil analysis as well as the different samples of oil palm fibres, which was classified as Elaeis Guineeensis and Tekena Species was analyzed to determine the possible elements present in the specimen and the result obtained identified, Mg, P, Si, …
Published in International Journal of Energetic Materials · Vol. 6, Issue 2, 2020 · pp. 25–30 Read article
-
Investigation of the Optical-Electrical Properties of Simonkolleite and ZnO: Synergism and Nano/Microcrystals
Abstract: This study aimed to investigate the optical-electrical properties of simonkolleite (SM) and zinc oxide (ZnO), focusing on ZnO's nano/micro size and the synergistic effects between SM and ZnO. The synthesis of SM nanocrystals (NCs) was successfully achieved, and thermal annealing temperature was used to manipulate the formation of SM/ZnO nanocomposites ranging from NCs to microcrystals of ZnO. Structural and morphological properties were characterized using X-ray diffraction (XRD),Fourier transforms infrared (FT-IR), …
Published in International Journal of Energetic Materials · Vol. 8, Issue 2, 2022 · pp. 18–30 Read article
-
Optimization Process Parameters of Manganese Phosphate coating developed on En-19 Steels by Statistical Design of Experiment
Abstract: Phosphating is a chemical conversion process in which constituents of a metal surface with a view to produce thin adherent protective coating of insoluble crystalline phosphate by reaction with phosphoric acid solution. This conversion coating should have strong interfacial adhesion and porous enough. The growth of phosphate coating is influenced by method of cleaning of metal surface to be treated before treatment, use of surface activating rinses and acid or …
Published in International Journal of Metallurgy and Alloys · Vol. 2, Issue 2, 2016 · pp. 6–12 Read article
-
Role and Applications of Alloys in Everyday Life
Abstract: An alloy is a mixture of metals or a mixture of a metal and another element. Alloys are defined by a metallic bonding character. An alloy may be a solid solution of metal elements (a single phase) or a mixture of metallic phases (two or more solutions). Melting point: Put the alloy, a piece of tin and a piece of lead into a sand tray. All three samples should be …
Published in International Journal of Metallurgy and Alloys · Vol. 3, Issue 1, 2017 · pp. 17–23 Read article
-
Effect of Ge and Pb Impurities on the Optical Properties of Amorphous (Sb2Se3)90Sn10 Thin Films
Abstract: The as prepared samples of [(Sb2Se3)90Sn10]95 M5 [M = Ge, Pb] chalcogenide system were amorphous as evidenced by X-ray diffraction studies. The optical band gap has been estimated with the help of Taucs relation for the as-deposited [(Sb2Se3)90Sn10]95M5 thin films. It is observed that the optical band gap increase with increase in the Ge and Pb content, which may be due to decrease in the density of defect states. This …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 1, 2020 · pp. 7–14 Read article
-
Effect of Indigenous Micros on Metal Corrosion in Different Water Environment
Abstract: The research on the effect of indigenous micros on metal corrosion in different water environment in life sciences and other fields as well as their significance was investigated. Mild Steel is one of the construction materials used in the industries. It has a young modulus of 200GNm-2. This paper focuses on the experimental study for the effect of indigenous micros on metals in different water environment and also of the …
Published in International Journal of Metallurgy and Alloys · Vol. 7, Issue 2, 2021 · pp. 1–10 Read article
-
Modern Material Concept to Produce Low-Loss Non- Oriented Electric Alloys
Abstract: The production of energy-efficient materials is an essential aspect of modern society, with efforts focused on reducing energy loss and conserving resources. A key element in the creation of energy-efficient electrical equipment, such as transformers, generators, and motors, is low-loss non-oriented electrical steel. In this regard, material design is a promising approach to improve the properties of non-oriented electrical steel. This paper presents an overview of material design for low-loss …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 2, 2022 · pp. 37–42 Read article
-
Recycling Multilayer Materials: Discovering Mechanical Parameters for Engineering Applications
Abstract: Multilayer materials have been widely used in various applications such as packaging, electronics, and construction industries. However, the disposal of these materials is becoming a significant environmental concern due to their non-biodegradable nature. Therefore, the recycling of multilayer materials has become an essential aspect of sustainable waste management. The mechanical characteristics of materials recycled from multilayer products were examined in this study. The focus was on determining the impact of …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 2, 2022 · pp. 43–47 Read article
-
Characterization of CeO2-NiO Thin Film Produced by Jet Nebuliser Technique
Abstract: CeO2 –NiO composite solution was sprayed as thin films by using JET nebulizer technique at the substrate temperature of 250°C. The film was characterized by X-ray diffractometer and crystallite size, lattice constant, crystallinities, phase transformations were measured. The UV-Vis spectrometer analysis was used to calculate the band gap, absorbance and percentage of transmission of the thin films was reported. The emission and excitation spectra of the sample were reported. The …
Published in International journal of Nanobiotechnology · Vol. 7, Issue 1, 2021 · pp. 1–17 Read article
-
Study the properties of spin-coated Co-doped ZnO (CZO) thin Film
Abstract: Co doped ZnO (COZ) nanoparticles were prepared by spray pyrolysis technique followed by annealing at three different temperatures. XRD, UV- Vis spectroscopy, Photoluminescence (PL) studies, Scanning electron microscopy (SE), and vibrating sample magnetometry (VSM) studies were made to analyze the structural, optical and magnetic properties. XRD pattern confirmed the improved crystallinity after annealing and the formation of hematite phase. A UV-visible spectrum indicates that the nanoparticles exhibit the blue shifting …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 3, Issue 2, 2017 · pp. 26–35 Read article
-
Synthesis, characterization, antibacterial activity and in-vitro cytotoxicity of Dy and Fe doped hydroxyapatite nanomaterials
Abstract: Dy- and Fe-doped hydroxyapatite (HAp) was synthesized by the facile aqueous precipitation method. The samples were characterized by using powder X-ray diffraction, Fourier transform infrared spectroscopy and transmission electron microscopy. In this work, the antibacterial activities of Dy- and Fe-doped HAp were tested against gram-positive (Staphylococcus aureus, Bacillus subtilis) and gram-negative (Escherichia coli, Klebsiella pneumoniae and Pseudomonas putida) bacteria by agar diffusion test. It was found that Dy(5)-and Fe(5)-doped HAp …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 4, Issue 1, 2018 · pp. 46–54 Read article
-
Amorphous Carbon Nanotube-MoS2 Nanohybrids : A New Future Material in the Application of Battery, Supercapacitor and Field-emission Display Devices
Abstract: The discovery of graphene make the researcher interested towards the other two-dimensional material which has quite similar properties like graphene. Among them, MoS2 nanosheets has extraordinary optoelectronic and physical properties. It has several applications in developing battery, sensor, optoelectronic device etc. On the other hand, amorphous carbon nanotube can be synthesized by using a low temperature chemical process. Due to the easy processing of amorphous carbon nanotube (ACNT), good optoelectronic …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 5, Issue 2, 2019 · pp. 36–45 Read article
-
Effect of Compatibilizers on Polypropylene-Based Peanut Shell Flour Composites Reinforced with Nanoclay
Abstract: The improvement of innovative ingredients is on the rise, especially in the automobile, aerospace, aviation, and construction industries. Conventional ingredients are being substituted with nanocomposite ingredients due to their excellent features. In this study, various composites based on polypropylene (PP), peanut shell flour (50 wt% PSF), and nanoclay (Cloisite 30B) were manufactured by melt mixing process followed by injection molded in the presence of maleated PP (PPM) and maleated styrene …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 8, Issue 2, 2022 · pp. 1–13 Read article
-
Comparative study of the Magnetoelectric Properties in Core-Shell Nanocomposites as well as mixture of CoFe2O4:BaTiO3
Abstract: Nanostructures of multiferroic materials have been drawing increasing curiosity due to the boosted magnetoelectric coupling and potential for succeeding generation multifunctional devices. Composites of ferroelectric and magnetostrictive materials indicate more magnetoelectric coupling than single phase materials. Core-shell CoFe2O4:BaTiO3 nanocomposites (1:1 weight ratio) and a mixture of both of them have been produced by a combination of hydrothermal and sol gel techniques. X ray diffraction analysis endorses the presence of both …
Published in International Journal of Composite and Constituent Materials · Vol. 1, Issue 1, 2015 · pp. 1–6 Read article