Search
1179 articles for “Production”
-
Study of the Effect of Water Retarding Concrete Admixtures on the Properties of Concrete
Abstract: Water retarding concrete admixtures and super plasticizer are extensively utilized to recover the structural and mechanical properties of fresh and hardened concrete. These admixtures are more regularly used in pre-stressed concrete, slim components with overfilled and densely filled reinforcement, beams and slabs pre-cast basics and long slender column. In current decades, marvelous success has been attained in the progression of chemical admixtures for Portland cement. Most efforts have concentrated on …
Published in International Journal of Construction Engineering and Planning · Vol. 4, Issue 1, 2018 · pp. 10–14 Read article
-
The Role of Off-Site Construction Technology in Building Construction Industry
Abstract: ABSTRACT The purpose of this study is to display the role of off-site method of construction technology. On this research, descriptive case study method was employed. Both primary and secondary data sources were utilized, in which primary data were collected through personal interview, desk study, questionnaires and field observation and secondary data were collected from different documents and sources. The findings showed that, off-site construction has a great role on …
Published in International Journal of Construction Engineering and Planning · Vol. 4, Issue 2, 2018 · pp. 16–21 Read article
-
Simulation Models for Flexural and Compressive Strength of Concrete Using Waste Glass as Partial Replacement.
Abstract: The research present the usefulness of waste glass in the production of grade 20 concrete using partial replacement levels of 0%, 20%, 40% and 60%, respectively, for coarse glass and fine glass to coarse aggregate and fine sand aggregate. The results obtained indicate that, for the purpose of construction works, 20% replacement should be adopted either for coarse glass or fine glass replacement. Simulation models were established to predict flexural …
Published in International Journal of Construction Engineering and Planning · Vol. 4, Issue 2, 2018 · pp. 1–7 Read article
-
Compressive Strength, Water Absorption and Temperature Effects on Partial Replacing Cement with GGBS, Micro Silica and Fly Ash
Abstract: Widespread research work for decades also in development throughout the globe in concrete technology in finding substitute materials which can incompletely change Pozzolonic Portland Cement (PPC) and which can also meet the necessities of the strength and durability performance of industrial by products like micro silica, ground granulated blast furnace slag, fly ash, etc. now termed as complimentary cementations materials (CCM) are quite promising. The increased quest for sustainable and …
Published in International Journal of Construction Engineering and Planning · Vol. 4, Issue 2, 2018 · pp. 30–37 Read article
-
To Study Mechanical Properties of Concrete by Using Industrial Waste Material
Abstract: Concrete is a very important material with cement, water, aggregate and admixture as contents. Due to increasing pollution and demand of concrete, its production should be environmental friendly. In this study, we emphasize on environment friendly concrete. The proportion of silica fume was as follows: add 3%–15% in interval of 3% by weight of cement in concrete and fly ash was add 5%–25% in interval of 5% by total weight …
Published in International Journal of Construction Engineering and Planning · Vol. 5, Issue 1, 2019 · pp. 18–27 Read article
-
Identification of KPIs in Construction Industry: A Review
Abstract: The success of any construction project depends on project performance. Construction industry contains large number of parties, i.e. clients, stakeholders, shareholders, consultants, contractors, regulators and others. The factors that affect the performance of construction projects result in disputes, claims, failures and delays in construction. Through performance measurement, organizations can improve their productivity and also compare it with their competitors, as well as identifying their weakness. The main aim of this …
Published in International Journal of Construction Engineering and Planning · Vol. 5, Issue 1, 2019 · pp. 28–38 Read article
-
Impact of Sugarcane Molasses on Compressive Strength and Workability
Abstract: Molasses used as admixture increase the workability, it is a by-product of sugar industry. In this study, mechanical property such as compressive strength and workability of concrete adding fly ash and sugarcane molasses has been investigated. Adding the molasses in concrete increase the compressive strength, delay the initial and final setting time, reduced the bleeding and segregation of concrete and decrease the W/C ratio. The compressive strength test results showed …
Published in International Journal of Construction Engineering and Planning · Vol. 6, Issue 1, 2020 · pp. 1–5 Read article
-
Awareness of Total Quality Management and Extent Used in Construction Projects
Abstract: Construction industry is a major sector in India with country’s GDP (Gross Domestic Product) of9% (2017) as per world bank. For increasing the share from such sector in this competitive environment TQM can be used as tool of strategy. TQM is a management strategy focusing on the customer satisfaction through continuous improvement of the process and enhancing team work. Here all employees associated with the project are involved to follow …
Published in International Journal of Construction Engineering and Planning · Vol. 6, Issue 2, 2020 · pp. 1–7 Read article
-
Procurement and Deployment of Equipment for Contracts in Civil Engineering Construction
Abstract: Many contracts have suffered a lot of delays and have faced challenges due to procurement-related matters and inadequate manpower to handle equipment for optimal performance. This study was aimed at the procurement of equipment and utilization of machines in civil engineering contracts. Methodology is basically site visitation, literature review and discussion with engineers, experts and workers on site. Parameters are liable for the procurement of materials and utilizing their lead …
Published in International Journal of Construction Engineering and Planning · Vol. 8, Issue 2, 2022 · pp. 29–37 Read article
-
Risk Management in Construction Projects: Consultants’ Perspective
Abstract: Construction projects are among the most vulnerable projects to uncertainty and risks which affect project schedule and increase costs. The issue of risk in construction is a global one, and the Palestinian construction sector is no different. This study aims to identify risk factors in construction projects from consultants’ perspective in Palestine and to prepare risk map for them, then to suggest response for critical ones. A survey using a …
Published in International Journal of Construction Engineering and Planning · Vol. 8, Issue 2, 2022 · pp. 38–50 Read article
-
Study of Durability Properties of Bagasse Ash Concrete and Its Behaviour when Exposed to Elevated Temperatures
Abstract: The major driver for the economic growth and social progress of any country is its construction sector. In India, it is estimated that construction contributes 8% to 9% to GDP and this share is likely to increase in coming years. High-performance concrete made from ordinary Portland cement (OPC) and various supplementary cementitious materials (SCM) are alarmingly finding their use in construction worldwide. Bagasse ash (BA), one such SCM, the agro-industrial …
Published in International Journal of Construction Engineering and Planning · Vol. 8, Issue 2, 2022 · pp. 51–62 Read article
-
Utilization of Industrial waste in construction Industry – a Review
Abstract: The reuse of industrial wastes will help in solving the environmental pollution issues associated with their disposal, but it will also increase the preservation of natural resources that are reducing rapidly. The major motivation of this project is the increase in waste products and increasing consumption of cement in construction industry. By reducing use of cement cost of construction can be reduced and it also reduces the environmental hazards produced …
Published in International Journal of Construction Engineering and Planning · Vol. 9, Issue 1, 2023 · pp. 57–62 Read article
-
Fresh and Hardened Properties of High Performance Concrete with Weld Slag as Fine Aggregate
Abstract: This research centers on the incorporation of welding slag, the residue remaining after the welding process, as fine aggregates in the production of high-performance concrete with a compressive strength of 70 MPa. The chemical and physical characteristics of welding slag aggregates (WSA), such as chemical compositions, specific gravity, SEM images, XRD, and EDS analysis, were investigated. Additional investigations were carried out by substituting welding slag with standard sand at varying …
Published in International Journal of Construction Engineering and Planning · Vol. 9, Issue 2, 2023 · pp. 29–36 Read article
-
Effect of Replacing Rice Husk Ash with Cement and Granulated Blast Furnace Slag with Fine Aggregates on High Performance Concrete
Abstract: Cement and sand are the basic materials for any concrete construction. Now a day’s due to erosion of rivers and considering environmental issues, there is a scarcity of river sand. Many researchers are finding different materials to replace sand and one of the major materials considered in this study is granulated blast furnace slag (GBFS). In recent times, instead of cement many alternative materials are being used as the binding …
Published in International Journal of Concrete Technology · Vol. 2, Issue 2, 2016 · pp. 30–35 Read article
-
Susceptibility Behaviour of Asphalt Concretes Under Varying Mix Temperature Conditions: Study on Stability and Flow
Abstract: Understanding the behaviour of flexible pavements synonymous with asphalt concretes is one that can be complex due to the make-up of the pavement (asphalt concrete) and the external factors that impedes its performance from production stage to service life. The present study had considered one of the most damaging factors to asphalt concrete – mix temperature; and its effect on some of the mix design properties of asphalt concrete that …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 1–7 Read article
-
Effect of Colloidal Nanosilica on High Strength Rice Husk Ash Concrete
Abstract: Nowadays, supplementary cementitious materials (SCMs) are used in concrete because it reduces CO2 emission during. The husks, which are production of cement, reduces cement contents, improve workability, increase strength and enhance durability. Pozzolanic reaction takes place when siliceous or aluminous material comes in contact with calcium hydroxide in the presence of moisture to form compounds possessing cementitious properties approximately 50 percent cellulose, 30 percent lignin and 20 percent silica, are …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 33–43 Read article
-
A Technical Analysis of Fly Ash Concrete for Compressive Strength
Abstract: Fly ash is a waste produced by thermal power plants and used as a supplementary cementitious material (SCM) in the production of Portland cement concrete. A supplementary cementitious material, when used in combination with Portland cement, pays to the properties of the hardened concrete through hydraulic or pozzolanic activity, or both. At present fly ash, is a big environmental concern and issues. The analysis presented in this paper is carried …
Published in International Journal of Concrete Technology · Vol. 4, Issue 1, 2018 · pp. 21–24 Read article
-
Utilization of Paper Waste in Making of Cement Concrete
Abstract: Cement manufacturing industry is one of the main carbon dioxide constructing sources moreover burning of fossil fuels and deforestation and concrete industry is one of the major consumers of natural virgin materials. India is the country that is facing a severe contest in the disposing the waste in landfills throughout the country. The landfill disposal is resulting in high disposal costs and potential environmental problems. If the current situation continues, …
Published in International Journal of Concrete Technology · Vol. 4, Issue 1, 2018 · pp. 36–41 Read article
-
Utilization of E-Waste in Concrete
Abstract: E-waste or electronic waste is a term used for discarded electronic products that have become unwanted, non-working or outdated, and have basically touched the end of their useful life. The amount of e-waste materials that needs to be disposed off keeps increasing day by day which make e-waste a developing issue posing serious pollution problems to the mankind and the environment, not only in India but also globally. Reusing e-waste …
Published in International Journal of Concrete Technology · Vol. 4, Issue 1, 2018 · pp. 42–49 Read article
-
Aerocon Bricks
Abstract: Various low-cost housing projects are considered by a growing demand chiefly due to urbanisation. The collection of building materials should chance the requirements of local conditions to enhance quality of life for the most needed ones by building new structures and/or by improving existing structures. Various studies showed that a big variety of wall materials have been used in different building systems with traditional and modern construction methods, but only …
Published in International Journal of Concrete Technology · Vol. 4, Issue 2, 2018 · pp. 37–48 Read article