Search
136 articles for “L-scan”
-
Tri-Route Orchestration of Sr-Modification, MoldVibration, and T6 Treatment on the Microstructure andPerformance of A356 Alloy
Abstract: This study examines the cascade effects of chemical modification, mechanical mold vibration during solidification, and subsequent T6 heat treatment on the microstructural evolution and multi-property enhancement of A356 Alloy cast via permanent mold casting. Initially Sodium (Na) modifying flux (2– 4 wt%) and Strontium (Sr) elemental modifier (0.01–0.05 wt%) were implemented to refine the morphology of eutectic silicon; Sr addition at an optimal concentration of 0.04 wt.% yielded superior eutectic …
Published in International Journal of Manufacturing and Materials Processing · Vol. 12, Issue 2, 2026 · pp. 13–25 Read article
-
Facile Synthesis and Electrochemical Exploration ofHexagonal Copper Sulfide (CuS) Nanocrystals for EnergyApplications
Abstract: Copper sulfide (CuS) is a promising material for a variety of applications, including solar cells, lithium-ion batteries, sensors, and catalysts. In this current study, a facile technique for the synthesis of CuS nanocrystallites at modrate temperature 160°) without the use of any template or additives was reported. The reaction was carried out in a pressure reactor for 24 hours. he crystalline nature of the synthesized CuS nanocrystallites was confirmed using …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 12, Issue 1, 2026 · pp. 1–8 Read article
-
Zinc oxide/Chitosan biocompatible nanocomposites: Preparation, Characterization and its use in Congo red dye photodegradation
Abstract: Zinc oxide/chitosan biocompatible nanocomposites have been successfully synthesized by co-precipitation method. The samples were characterized by X-ray diffraction (XRD), Scanning electron microscope (SEM), Energy dispersive X ray Flurescence spectroscopy (EDAX) and Fourier transformation infrared spectroscopy (FTIR). The photocatalytic efficiency and photostability of the sample was investigated systematically for Congo red degradation under solar light irradiation. UV-vis Spectroscopy was employed to investigate the optical properties and photocatalysis behavior of the Zinc …
Published in International Journal of Applied Nanotechnology · Vol. 3, Issue 2, 2017 · pp. 27–39 Read article
-
Facile Synthesis and Electrochemical Exploration ofHexagonal Copper Sulfide (CuS) Nanocrystals for Energy Applications
Abstract: Copper sulfide (CuS) is a promising material for a variety of applications, including solar cells, lithium-ion batteries, sensors, and catalysts. In this current study, a facile technique for the synthesis of CuS nanocrystallites at modrate temperature 160°) without the use of any template or additives was reported. The reaction was carried out in a pressure reactor for 24 hours. he crystalline nature of the synthesized CuS nanocrystallites was confirmed using …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 12, Issue 1, 2026 · pp. 1–8 Read article
-
Tibia/Shin Bone Fracture: Its Surgical Management
Abstract: Tibia is also called shin bone. A fracture occurs when there is a disruption in the continuity of a bone. A crack or break in the tibial bone, also called a tibial fracture, is one of the most painful and disrupted conditions of the lower limb. This type of fracture is caused by accidents, falls, collisions, twisting, sports, etc. Pain, bleeding, tissue injury, tingling, and other symptoms are common in …
Published in International Journal of Medical Surgical Nursing · Vol. 7, Issue 1, 2024 · pp. 53–56 Read article
-
Effect of Nanoclay on the Performance of Calotopis Gigantea Fiber Reinforced Thermoplastic Composites at Distinct Temperature
Abstract: Polymer-based nanocomposite is a developing subject that attracts many researchers due to its special qualities and versatility. Because the specific surface areas of nanofillers in nanocomposites are so high, it is much simpler to produce mechanical properties at the interface. Furthermore, a favorable interaction between the nanofillers and polymer matrix may manifest itself even at comparatively lower percentages of loading nanofillers. Thus, a smart, adaptive polymer nanocomposite material with the …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 9, Issue 2, 2023 · pp. 1–9 Read article
-
Green Chemistry Approach for the Preparation of Silver Nanoparticles: A Review
Abstract: The word "nanoparticles" refers to particles within a size range of 10 and 100 nm. Nanotechnology is the topic that is growing the fastest because of its applications in science and technology to produce new at the nanoscale range. Silver is the metal of first preference among the various noble metals. The production of silver nanoparticles can be achieved by different methods such as: chemical method, biological method, green synthesis. …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 9, Issue 1, 2023 · pp. 30–39 Read article
-
Sorption of Pb (II), Cd(II) and Zn(II) by synthesized nanocrystalline sodium potassium flurophlogopite (FGP)
Abstract: We have successfully synthesized nanocrystalline sodium potassium fluorophlogopite (FGP) crystals with controlled sizes from ≈ 25 nm to 100nm, using an organic tetrapropylammonium (TPA) hydroxide. We have been successfully synthesized material depends on the source of silicate and hydrothermal crystallization conditions. The synthesized materials were characterized by using different techniques such as X-ray diffraction, Energy Dispersive Analysis, Scanning Electron Microscope, Transmission Electron Microscopy and FTIR analysis. The use of sodium …
Published in International Journal of Composite Materials and Matrices · Vol. 9, Issue 2, 2023 · pp. 41–49 Read article
-
Effect of TiO2 on HER Activity of Electrodeposited Zn–Ni Coatings
Abstract: This paper demonstrates the improved electrocatalytic behavior of Zn–Ni alloy coatings for alkaline hydrogen evolution reaction (HER), due to addition of TiO2 nanoparticles into the bath. Zn–Ni alloy coatings have been electrodeposited galvanostatically on copper, with wide compositional range (2.31–7.91 wt. % of Zn) at different current densities (c.d.) between 2.0 and 5.0 A dm-2. The electrocatalytic behaviors of all coatings have been studied for alkaline HER in 1.0 M …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 3, Issue 1, 2017 Read article
-
Mechanical and Microstructure Properties of Al and SiC Reinforced Aluminum-Based Metal Matrix Composite
Abstract: It is becoming increasingly difficult to design new technical materials that are resistant to wear damage and corrosion degradation in severe service circumstances. Unfortunately, even with crucial passive metals, like Al alloys, there is often a compromise between wear and corrosion resistance. Because of the unfavorable galvanic connection between the precipitates and the matrix, precipitates not only harden the material but also accelerate corrosion. This research established that a supersaturated …
Published in International Journal of Metallurgy and Alloys · Vol. 11, Issue 1, 2025 · pp. 26–43 Read article
-
ENHANCEMENT OF MECHANICAL PROPERTIES OF ALLOY 61S BY REINFORCING NANO COMPOSITES
Abstract: During recent decades, a lot of interest had shown in the materials production with nano sized grains. Especially, the aluminum alloys and its composites are widely used for demanding structural applications due to combination of corrosion resistance, formability, weldability and, mechanical properties. The demand for toughness, higher strength and, strength and weight ratio of aluminum alloys for the structural application is ever growing owing to the increasing importance of achieving …
Published in International Journal of Metallurgy and Alloys · Vol. 5, Issue 2, 2019 · pp. 18–36 Read article
-
Sustainable Cementitious Composites withEpoxy–Alccofine Synergy
Abstract: This research examines the combined influence of epoxy resin and Alccofine when used as partial substitutes for cement in producing sustainable, high-performance concrete. The study aims to improve both strength and durability properties while simultaneously reducing cement usage and its environmental impact. Concrete mixes were prepared with epoxy resin contents of 0%, 5%, and 10% by weight of cement, along with Alccofine replacement levels of 5%, 10%, and 15%. The …
Published in International Journal of Concrete Technology · Vol. 12, Issue 2, 2026 · pp. 1–12 Read article
-
Trichoderma Based Synthesis of Silver Oxide Nanoparticles, Their Characterization and Assessment of Antifungal Activity
Abstract: The fungal spore suspension of Trichoderma harzianum was used for the preparation of AgO nanoparticles. T. harzianum spore suspension acts as reducing and stabilizing agent for the fabrication of nanoparticles. The synthesized nanoparticles were characterized by X-ray diffractometry (XRD), scanning electron microscopy (SEM), energy dispersive X-analysis (EDAX) and transmission electron microscopy (TEM). The AgO nanoparticles were circular in shape with average diameter 10-20 nm. The AgO nanoparticles showed promising antifungal …
Published in International journal of Nanobiotechnology · Vol. 7, Issue 2, 2021 · pp. 19–25 Read article
-
Nanostructured Carbon Aloe vera based DSSC Solar Cell Using Screen Printing Technology
Abstract: Today every nation faces vitality emergencies; so, to conquer it, various arrangements are given to advance towards sun-based energy harvesting which is rich and allowed to utilize. The presented study aims to give a simple synthesis technique for mass production of DSSC from working principles to the first commercial use. DSSC converts solar energy into electricity with help of energy harvesting materials like natural dye which makes it more sustainable …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 6, Issue 2, 2020 · pp. 52–59 Read article
-
OPTIMIZATION OF EDM PARAMETERS USING PARTICLE SWARM OPTIMIZATION ALGORITHM
Abstract: Aluminium metal matrix composites are increasing the applications such as automobile industries, aerospace industries ,marine as well as construction. The use of nonconventional machining techniques in shaping aluminum metal matrix composites has generated extensive interest as the manufacturing of complicated contours such as dies. Electrical discharge machining (EDM) tends to be a promising technique for machining metal matrix composites. Hybrid Al6061 composite reinforced with 10% SiC and 4% Graphite particles …
Published in International Journal of Composite and Constituent Materials · Vol. 1, Issue 2, 2015 · pp. 1–9 Read article
-
Studies on the Kinetics of Thermal Decomposition of Copper Oxalate Mixed With Silver Oxalate
Abstract: The coprecipitates, Ag2Cu(C2O4)nH2O of varying composition [Ag = (1 and 2)%], have been synthesized and were characterized by means of IR, XRD, and SEM. The decomposition of the prepared oxalates was monitored by differential scanning calorimetry (DSC) and thermogravimetry (TG). The DSC studies reveal that the decompositions of the mixed oxalates were all complex exothermic processes with resemblance to the exothermic reaction of copper oxalate and ranges from 540 to …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 2, Issue 1, 2016 · pp. 1–11 Read article
-
Physico-Mechanical and Degradation Properties on Agro-Waste Based Polymer Composites Reinforced with Banana Bunch Fiber
Abstract: The usage of banana bunch fibers in polymer composite parts for the automotive, aerospace, and construction industries is growing. As people grow more aware of the danger of synthetic fibers, banana bunch fibers are being used in an increasing variety of sectors. It is important to recognize that humans depend on the Earth for survival, not the other way around. This understanding drives scientists and policymakers to seek alternatives to …
Published in International Journal of Composite and Constituent Materials · Vol. 10, Issue 2, 2024 · pp. 33–43 Read article
-
Characterization of CeO2-NiO Thin Film Produced by Jet Nebuliser Technique
Abstract: CeO2 –NiO composite solution was sprayed as thin films by using JET nebulizer technique at the substrate temperature of 250°C. The film was characterized by X-ray diffractometer and crystallite size, lattice constant, crystallinities, phase transformations were measured. The UV-Vis spectrometer analysis was used to calculate the band gap, absorbance and percentage of transmission of the thin films was reported. The emission and excitation spectra of the sample were reported. The …
Published in International journal of Nanobiotechnology · Vol. 7, Issue 1, 2021 · pp. 1–17 Read article
-
Thermal and structural properties of surface treated ragweed fiber reinforced biodegradable polylactic acid biocomposites
Abstract: Natural fiber-reinforced composites (NFRC) are becoming more popular as technological advance recognizes the need for eco-friendly materials. This work presents Giant ragweed (Ambrosia trifida) as a new composite reinforcement material into polylactic acid (PLA) matrix to form novel natural fiber-reinforced composites. Different types of retting techniques are utilized, and hydrogen peroxide retting is proven to provide the most optimized properties. The fibers are taken through subsequent extraction and grinding processes. …
Published in International Journal of Composite and Constituent Materials · Vol. 8, Issue 2, 2022 · pp. 13–31 Read article
-
Design and Analysis of Metal-Organic Frameworks for Gas Adsorption and Storage
Abstract: Metal-Organic Frameworks (MOFs) represent a class of highly porous materials formed by the coordination of metal ions with organic linkers, exhibiting exceptional potential for gas storage applications due to their high surface area, tunable pore sizes, and structural versatility. The synthesis and characterization of MOFs intended for the effective storage of gases like carbon dioxide, methane, and hydrogen are the main topics of this work. Solvothermal Hectic strategies, including solvothermal, …
Published in International Journal of Metallurgy and Alloys · Vol. 10, Issue 1, 2024 · pp. 25–30 Read article