Search
384 articles for “Thermal”
-
Performance Analysis Of A Bio Diesel Fuelled Diesel Engine With The Effect Of Titanium Oxide (TiO2) Coated Piston
Abstract: Biodiesel is one of the best alternative fuel to diesel engine among other sources due to having potential to reduce emissions. Biodiesel is a renewable, biodegradable and environment friendly fuel in nature. The advantages of biodiesel are lower exhaust gas emissions and its biodegradability and renewability compared with petroleum based diesel fuel. The energy of the biodiesel can be released more efficiently with the concept of semi adiabatic (thermal barrier …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 3, Issue 1, 2017 · pp. 58–70 Read article
-
A Review on Cutting Parameter on Micro Drilling Characteristics of Different Steel
Abstract: Related work revealed that a lot of works have been done on the cryogenic turning of various metals. The tool life significantly increases with the introduction of cryogenic and thermal-assisted machining in the turning operations. The reductions in the heat at tool chip interface have significantly affected on the tooled life. Some research gaps in the literature have been found as: Limited research works have been performed on the cryogenic …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 7, Issue 1, 2021 · pp. 31–36 Read article
-
A Study on Machine-Learning-Driven Insight into theThermal Behavior of Polymers and Composite Materials
Abstract: The thermal performance of polymeric and composite systems underpins their suitability for aerospace, electronics, and energy‑storage applications, yet reliable prediction of temperature‑dependent properties remains a formidable challenge. In this work we present a data‑driven framework that harnesses modern machine‑learning (ML) techniques to forecast key thermal metrics – glass‑transition temperature (Tg), melting point (Tm), thermal conductivity (k), and decomposition onset (Td) – from a chemically informed descriptor space. A curated database …
Published in International Journal of Polymer Science and Engineering · Vol. 12, Issue 1, 2026 · pp. 1–11 Read article
-
High-Tech Battery Management Systems with Integrated Battery Electronics
Abstract: “Sophisticated BMSs with onboard battery electronics are a paradigm shift in battery technology, sensitive enough to meet the increasing needs of contemporary applications like electric vehicles, renewable energy storage, and portable devices. This paper discusses the architecture and functional aspects of the integrated systems in optimizing performance, safety, and lifespan through real-time monitoring and control of individual cells. Integrating critical electronics directly onto the battery structure, such systems minimize complexity …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 12, Issue 1, 2026 · pp. 21–28 Read article
-
A Sensor Integrated Tool for Cutting Force Monitoring in Gantry Milling to Improve Flatness and Surface Finish: Review Study
Abstract: AbstractPrecision machining of sector plates plays a vital role in the efficient functioning of Air Pre-Heaters(APH), which are integral components of thermal power plants. These plates are subjected to harshthermal cycles and mechanical loads, making dimensional accuracy critical. For optimal heatexchange performance and mechanical reliability, it is essential to maintain tight manufacturingtolerances – flatness within ±400 microns and thickness up to 13 mm. Deviation from theseparameters can lead to air …
Published in International Journal of Manufacturing and Materials Processing · Vol. 11, Issue 1, 2025 · pp. 25–45 Read article
-
Optimizing Power Output in Solar Chimney Power Plants: Influence of Collector Area and Chimney Height
Abstract: This research paper investigates the crucial factors that determine the power output of solar chimney power plants, specifically the collector area and chimney height. A larger collector area efficiently gathers and heats a larger volume of air, and a steeper chimney height raises pressure differences via the stack effect, resulting in greater power generation. The study explores the significance of heat retention within the collector area, enabling continuous operation, even …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 11, Issue 1, 2025 · pp. 27–36 Read article
-
Novel Process for the Synthesis of Chlorinated Polyvinyl Chloride Using Unsaturated Polyvinyl Chloride Resin
Abstract: The present work is related to the process for the synthesis of a reactor made chlorinated polyvinyl chloride (CPVC) from commercially available thermally treated unsaturated PVC. The synthesis of CPVC is a two-step process. The first step is the controlled thermal treatment of the PVC to generate the unsaturation in the PVC chain. The second step is the chlorination of the thermally treated PVC in presence of an initiator and …
Published in International Journal of Polymer Science and Engineering · Vol. 11, Issue 1, 2025 · pp. 14–23 Read article
-
Evaluation of the Potential of Fused Silica Material: The Relationship of Temperature, Frequency, and Polarization
Abstract: Fused silica, a high-purity form of silicon dioxide, is widely recognized for its exceptional thermal stability, optical transparency, and low dielectric loss. This study evaluates the potential of fused silica as a material in advanced optical, electronic, and photonic applications by exploring its properties in relation to temperature, frequency, and polarization. Through a comprehensive analysis, we examine the temperature-dependent changes in its thermal and optical properties, including thermal expansion, refractive …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 10, Issue 2, 2024 Read article
-
An Investigation of Properties Nanoparticles Reinforced Thermoplastic Nanocomposites
Abstract: Nanoparticles and nanocomposites find widespread uses in a variety of fields, such as building materials, architecture, optics, food packaging, optoelectronics, semiconductors, medicine, textiles, cosmetics, and catalysis. Compared to their microparticle cousins, polymeric nanocomposites-a unique family of materials-perform better because they blend organic polymers with inorganic nanoparticles. As a result, they ought to improve the domain of engineering applications. Inorganic nanoparticles can significantly alter the properties of a polymer matrix. Flexible …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 10, Issue 2, 2024 · pp. 54–64 Read article
-
Earthen Architecture: Sustainable and Eco-Efficient Construction
Abstract: Sustainable construction or material can be achieved by using the local and natural resources so that it can meet cultural, economic and social needs, but it does not refer to degrade these resources to such extent that they cannot meet these needs in future generations. Earth materials are cheap, abundant, environment friendly and are the extensively used material for construction around the world. The number of ancient earthen building that …
Published in International Journal of Sustainable Building Technology · Vol. 3, Issue 2, 2020 · pp. 20–27 Read article
-
Radiant Cooling System (Energy, Comfort and Cost Assessment)
Abstract: With an objective to provide thermal comfort, a well-planned and efficient HVAC system is of foremost importance. HVAC being the highest contributor of power consumption in the building (40% approximately), there is a need of a system which induce thermal comfort and reduce the power consumption, thereby improving the indoor environmental quality. Radiant system works on the transfer of heat through radiation which provides maximum thermal comfort and reduces the …
Published in International Journal of Architecture and Infrastructure Planning · Vol. 3, Issue 2, 2017 · pp. 14–19 Read article
-
Enhancement of Heat Transfer Coefficient in Shell and Tube Heat Exchanger Using 1-Butyl-3-Methylimidzaolium Bromide
Abstract: Improvement in heat transfer coefficient in heat exchanger plays very important energy saving role in the industries. In this study the effect of ionic liquid on HT coefficient was studied using a lab scale shell and tube heat exchanger (length-39 cm, shell diameter 9 cm, Tube diameter 0.62 cm). Also the effect of cold and hot flow rate on heat transfer coefficient, Effect of mass concentration of ionic liquid was …
Published in International Journal of Chemical Separation Technology · Vol. 2, Issue 1, 2016 · pp. 11–18 Read article
-
Potato Starch-Based Polyethylene Composite: Fabrication and Evaluation
Abstract: This study's objective was to create and evaluate a biodegradable polymer composite consisting of potato starch (PS) and low-density polyethylene (LDPE). The effects of changing the PS content (10– 40 wt%) on the mechanical (elongation at break and tensile modulus), thermal (heat conductivity), and biodegradability characteristics of the polymer composite were examined. Next, it was examined how the cross-linking agent influenced the polymer composite's mechanical and thermal properties. The melt …
Published in International Journal of Chemical Separation Technology · Vol. 8, Issue 2, 2022 · pp. 32–44 Read article
-
Design and Performance Evaluation of an Existing Cooling Tower in Port Harcourt Refinery
Abstract: The need for efficient and effective waste heat removal systems forms the basis of this research which is the Design and Performance Evaluation of an Existing Cooling Tower in Port Harcourt Refinery. The design performance equation models were developed by the application of the principle of conservation of mass and energy and also from standard correlations from literatures. The input parameters for the solution of the design performance equations were …
Published in International Journal of Environmental Chemistry · Vol. 6, Issue 1, 2020 · pp. 30–41 Read article
-
Concentrating cylindrical-parabolic solar collectors with thermo-electric generators for electricity production – viability assessment in India
Abstract: The use of concentrating solar collectors for converting solar insolation into thermal energy, followed by conversion of thermal energy to electricity via low to medium temperature thermoelectric generators at a particular location in India has been explored in this work. This may be considered a different route to obtaining solar heat and electricity apart from the more usual and direct solar photovoltaic conversion. Even though such a scheme may not …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 5, Issue 2, 2019 · pp. 6–17 Read article
-
Partial Discharge Measurements on High Voltage XLPE Power Cable
Abstract: This article presents the analysis of partial discharge measurement techniques on high voltage XLPE cables. It covers the basics of partial discharge, different types of partial discharges, measurement techniques and experimental analysis under different conditions. To evaluate the degradation of a cable and condition of its insulation, an 11 kV cable sample is selected for the experimental test set up for PD detection and the results are demonstrated under various …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 4, Issue 1, 2018 · pp. 9–16 Read article
-
Hydrogen Peroxide Decomposition to Water: A Review Process
Abstract: The term "thermal" refers to the presence of heat. Breaking down is the action of decomposing. If a materials temperature is raised, it goes through a chemical process called thermal breakdown. At high temperatures, thermal breakdown processes occur. Before breaking into the products, the reactants absorb a lot of energy. The reactant is the beginning chemical. It decomposes to simpler entities, that might be either elements or compounds. Hydrogen peroxide …
Published in International Journal of Energetic Materials · Vol. 8, Issue 1, 2022 · pp. 17–20 Read article
-
Organic Compound 5-(4-methoxybenzyl)-N-phenyl-1,3,4-thiadiazol-2-amine and NiS filler used to Mitigation the Corrosion of Mild steel and in Marine Atmosphere
Abstract: The concentration of chloride ions is higher in marine atmosphere. The bulk amount of mild steel uses in sea weather for different works. This metal is very sensitive in chloride ions. It produces hostile environment for mild steel. Chloride ions develop corrosion cell on the surface of mild steel and it changes their external and internal morphology as well as physical, chemical and mechanical properties. Mild steel exhibits corrosion reaction …
Published in International Journal of Metallurgy and Alloys · Vol. 5, Issue 2, 2019 · pp. 56–64 Read article
-
Synthesis and Characterization of Poly(etherdiphenylene terephthalamide)-Metal Complexes in Heterogeneous Medium
Abstract: Condensation of terephthalic acid and 4,4ʹ-diaminodiphenyl ether resulted in aminoterminated oligomeric poly(etherdiphenylene terephthalamide) (PODTA) using phosphorylation technique. Schiff base complexes of this polyamide were synthesized with salicylaldehyde and 2-hydroxy-1-naphthaldehyde complexes of Co(II),Ni(II) and Cu(II). All the synthesized polyamide as well as Schiff’s base complexes were characterized by elemental analysis, IR spectroscopy and magnetic susceptibility measurements. Thermal stabilities of ligand and its various complexes were compared by thermogravimetric analysis. While, Co(II) …
Published in International Journal of Polymer Science and Engineering · Vol. 2, Issue 1, 2016 · pp. 13–19 Read article
-
Modification of Poly Vinyl alcohol by Grafting and Appropriate Blending for Higher Stability and Biomedical field Application
Abstract: PVA is a one of the most important vinyl polymer which is widely used in industrial applications. PVA polymer has excellent adhesive property, solubility in water and it is biodegradable. But when it is modified by appropriate crosslinking or grafting or blending techniques then its physical as well as stability is altered. When polymer is modified by blending with other materials then its degradability decreases but thermal stability increases. In …
Published in International Journal of Polymer Science and Engineering · Vol. 7, Issue 2, 2021 · pp. 27–33 Read article