Search
168 articles for “surface water”
-
Promoting Sustainable Agricultural Practices to Mitigate Nitrate and Pesticide Contamination in Uttar Pradesh Groundwater
Abstract: Groundwater serves as an indispensable resource for human consumption, agriculture, and industry globally, holding particular significance in India, where it supports over 80% of irrigation in states like Uttar Pradesh. However, the intensification of agricultural practices, characterized by the indiscriminate application of chemical fertilizers and pesticides, has led to widespread contamination of these vital aquifers. This paper undertakes a comprehensive examination of the prevalence, primary sources, and multifaceted impacts of …
Published in International Journal of Agrochemistry · Vol. 11, Issue 2, 2025 · pp. 1–14 Read article
-
Experimental Demonstration on the Recording of Capillary-Filled Microfluidic Devices Fabricated by Polymeric Material
Abstract: In this present experimental work, total 52 individual PMMA microfluidic devices are fabricated by maskless lithography, hot embossing lithography and direct bonding technique in a cleanroom laboratory. The selected working liquids are dyed water, dyed aqueous ethanol and dyed aqueous isopropyl alcohol and are prepared in a materials-science laboratory. Fabricated microfluidic devices are tested by the prepared aqueous working liquids, and each capillary-filled device after the surface-driven microfluidic flow is …
Published in International Journal of Polymer Science and Engineering · Vol. 5, Issue 2, 2019 · pp. 31–41 Read article
-
One-Step Fabrication of Superomniphobic Pvdf-HFPSiO2Membrane for Long-Term CO2 Absorption inMembrane Gas Absorption System
Abstract: Membrane pore wetting is one of the major challenges for membrane gas absorption, especially when low surface tension liquid absorbents such as amine absorbents are utilized. To minimize diffusion resistance across the membrane, maintaining a non-wetted operating mode in membrane gas absorption is crucial. In this study, a superomniphobic polyvinylidene fluoride-cohexafluoropropylene membrane was fabricated by adding silica nanoparticles (SiO2) in an ethanol coagulation bath through non-solvent-induced phase separation. The surface …
Published in International Journal of Composite Materials and Matrices · Vol. 10, Issue 2, 2024 · pp. 35–44 Read article
-
Predicting Water Distribution Pipe Thermal Abnormalities Caused by Wildfire
Abstract: The paper covers the temperature thermal control of the water distribution system by predicting the temperature exceeding the safe level at pipes' locations and shutting off the water access to the main distribution pipe. The advantages of predictive thermal control over setting the maximum allowed temperature are provided. The prediction uses a transient heat conduction model with an error function approximation for arbitrary distance from the surface. It is provided …
Published in International Journal of Environmental Chemistry · Vol. 11, Issue 2, 2025 · pp. 89–97 Read article
-
The Himalaya—A Greatest Architectural Heritage and Tourism Destination of Earth World
Abstract: Mountains cover around 27% of the Earth’s land surface and contribute to the sustenance and well-being of 720 million people living in the mountains and billions more living downstream. In other way, we can say that over half the human population depends on mountains for water, food, and clean energy. The Himalayan region has a very important divine meaning for Hindus as a “sacred space”. For Hindus, it is not …
Published in International Journal of Architectural Heritage · Vol. 1, Issue 2, 2018 · pp. 5–10 Read article
-
Synthesis of mixed metal oxides CuO-SnO, composite nano material for the study ofefficiency of textile fabrics as UV-absorbers
Abstract: In the present study we report the synthesis and characterization of nanosized copper oxide,tin oxide and composite of copper and tin oxide and their application on cotton fabrics forUV shielding. The CuO-SnO nanocomposite material prepared under different temperature90 0 - 150 °C by using water and 1,2-ethanediol as a solvent. Copper oxide, tin oxide andcomposite of copper and tin oxide nanoparticles were then applied to cotton sample to impartsunscreen activity …
Published in International Journal of Composite and Constituent Materials · Vol. 11, Issue 2, 2025 · pp. 1–5 Read article
-
A Review on Superhydrophobic Coating for Personal Protective Equipment in Coronavirus (Covid-19) Pandemic
Abstract: Novel coronavirus (COVID-19) infection caused by a newly acquired coronavirus. We have entered the global epidemic. It is important to maintain physical distance to prevent the spread of coronavirus among humans. However, health care workers and other paramedics worked 24 X 7 to rescue patients. While operating, the use of protective equipment is required. The use of protective equipment such as face masks, gloves and aprons is essential to prevent …
Published in International journal of Nanobiotechnology · Vol. 7, Issue 2, 2021 · pp. 10–18 Read article
-
Organically Modified Peanut Shell Flour-Reinforced Polypropylene Nanocomposites: Effect of Fiber Surface Treatment on Basic Properties
Abstract: Innovative composite ingredients are increasingly being used, particularly in the automotive, aerospace, aviation, and construction industries. Due to the remarkable properties of nanocomposite components, traditional ingredients are being replaced. This study's work focuses on the usage of polypropylene (PP) as polymer matrices and nanoclay and peanut shell flour (PSF) as reinforcing materials. To enhance the mechanical properties of the PP/PSF composites in the present work, PSFs were treated using sodium …
Published in International Journal of Analytical and Applied Chemistry · Vol. 8, Issue 2, 2022 · pp. 19–30 Read article
-
Design and Implementation of Autonomous Robots for Crack Detection in Dam Walls: Analyzing Vision-Based Algorithms and Structural Health Monitoring
Abstract: AbstractThe maintenance of dam walls is critical to ensure structural integrity, safety, and efficient water management. Cracks and other structural deficiencies can lead to severe consequences if left undetected. Traditional inspection methods are labor-intensive, time-consuming, and often hazardous, necessitating the development of autonomous systems for effective monitoring. This study focuses on the design and implementation of autonomous robots equipped for crack detection in dam walls, with an emphasis on vision-based …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 11, Issue 1, 2025 · pp. 14–26 Read article
-
Review on Energy Resources by Hydropower Plant
Abstract: Water falling from a high potential to a low potential generates hydropower, a renewable energy source. The potential energy of falling water is used to power a hydro turbine, which generates hydro energy. The rotor of the electrical generator is linked to this turbine. The water cycle is reliant on the sunlight. Hydro energy is a type of energy that can be used to operate machinery or generate electricity by …
Published in International Journal of Energetic Materials · Vol. 7, Issue 2, 2021 · pp. 19–25 Read article
-
Essential of bearing in materials engineering
Abstract: Essentials of bearing have been to maintain lubricant film to prevent metal to metal contact and hence local welding of two surfaces. Tribological and mechanical properties have improved by powder metallurgy route of bearing fabrications. Alloyed non-ferrous plane bearings have better friction coefficients than pure metals. Betterment has appeared in babbit/ bronze particulate reinforced composites. Ni addition has improved performances of graphite-lead free tin bronze composite layers on surface of …
Published in International Journal of Metallurgy and Alloys · Vol. 5, Issue 2, 2019 · pp. 1–17 Read article
-
Research Insight on Everest Contaminated by Toxic Metals
Abstract: The goal of this investigation of the Everest was to look at follow component fixations and altitudinal patterns in soil and snow. Mount Everest was chosen since its remote area and amazing height disengages it from limited contamination sources. Soil tests were gathered from Mount Everest by different specialists and the examples were broke down for Pb, Zn, Cd, Ni, Cr, Co, Cu, As, Mn, Hg, and V utilizing inductively …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 2, Issue 2, 2016 · pp. 21–23 Read article
-
Enhanced Recovery by Hydrotropes in Oxidized Coal Flotation
Abstract: AbstractSo far flotation proved its best in improving the concentration of low grade fines by recovering the maximum with the use of advanced flotation reagents. In this context we propose the process optimization with the use of hydrotropes as activators in the coal flotation process. It is observed that sodium benzoate a known hydrotrope helped in increasing the recovery of the concentrate percent from 12.8% at plant condition to 31% …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 7, Issue 1, 2021 · pp. 19–23 Read article
-
Optimization Strategies Towards Enhanced Production of Microbial Surfactants for Diverse Industrial Applications: A Futuristic Approach
Abstract: Chemical or synthetic surfactants being employed in numerous industries pose significant environmental hazards due to their persistence in the environment and potential toxicity to aquatic life. Biosurfactants are low-molecular-weight surface-active compounds that offer a promising alternative to surfactants owing to their less toxicity, biodegradability and biocompatibility nature. They are derived from a variety of natural sources, including bacteria, fungi, and plants. In recent years, there has been a surge in …
Published in International Journal of Industrial Biotechnology and Biomaterials · Vol. 10, Issue 1, 2024 · pp. 11–22 Read article
-
Nanoscale Metal Oxide Improvement for Photoelectrochemical Water Splitting and Hydrogen Generation
Abstract: The global pursuit of clean and renewable energy has spotlighted hydrogen as a sustainable fuel, particularly when generated through environmentally friendly methods. Among these, photoelectrochemical (PEC) water splitting stands out as a direct and solar-powered approach to hydrogen (H₂) production. Unlike conventional techniques that rely heavily on fossil fuels, PEC systems utilize semiconductor materials to absorb sunlight and catalyze the splitting of water into hydrogen and oxygen, without releasing harmful …
Published in International Journal of Applied Nanotechnology · Vol. 11, Issue 2, 2025 Read article
-
Short Experimental Report on the Passive Microfluidic Flow in Fluid Mechanics
Abstract: In this work related to experiments, two individual polymethylmethacrylate (PMMA) based microfluidic devices (microchannel bends) are fabricated by the following techniques: (a) maskless lithography, (b) hot embossing lithography, and (c) direct bonding technique. Dyed water is chosen as working liquid in this particular work. The CMOS camera is used to capture each passive microfluidic flow of dyed water in the fabricated devices. The effects of channel aspect ratio and centrifugal …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 7, Issue 2, 2021 · pp. 32–37 Read article
-
Nanotechnology in Pesticide Management: A Revolutionary Approach in Plant Protection
Abstract: Large extents of Pesticides are lost in huge quantities owing to photo degradation, rain wash out and by other means after application over the target. This will not only result in loss of pesticides form the applied target as well as environmental pollution apart from loss / reduction in effectiveness. If they are formulated using carriers, their efficacy can be sustained for longer period of time.The potential applications of “Nanotechnology” …
Published in International Journal of Agrochemistry · Vol. 1, Issue 1, 2015 · pp. 1–5 Read article
-
An Energetic Materials for Sustainable Solutions
Abstract: Nanomaterials are typically described as engineered substances possessing at least one dimension between 1 and 100 nm. Materials at the nanoscale display distinctive or enhanced characteristics, such as increased chemical reactivity, superior sensing performance, and improved mechanical properties. Nanotechnology provides a straightforward, rapid, clean, and cost-effective approach for synthesizing a wide range of organic compounds, encouraging many researchers to transition from conventional synthetic techniques. This article aims to highlight the …
Published in International Journal of Energetic Materials · Vol. 12, Issue 1, 2026 · pp. 7–12 Read article
-
Colloidal Gold Nanoparticles for Biomedical Applications
Abstract: The main problem of drug-based therapy is that the introduced compound is not located in the target area and it is widely dispersed. Colloidal nanoparticle-based treatment can benefit the situation. The human body can concentrate inert nanoparticle by passive targeting. The therapeutic delivery system can be promoted using the surface of gold nanoparticle so that it only targets the specific issues by active targeting. In passive targeting colloidal GNPs can …
Published in International journal of Nanobiotechnology · Vol. 4, Issue 1, 2018 · pp. 16–18 Read article
-
Study on Mechanical and Physical Properties of Wood-Plastic Nanocomposites after Fiber Surface Treatment
Abstract: Numerous composites based on high-density polyethylene (HDPE), wood flour (WF), and nanoclay (Cloisite 30B) were prepared by melt compounding followed by injection mold. This paper aims to evaluate the feasibility of using HDPE and underutilized WF as a material for the development of woodplastic composites, as well as the strengthening effect of nanoclay on them. To develop the poor interfacial interaction between the hydrophilic WF and hydrophobic HDPE matrix, as …
Published in International Journal of Chemical Engineering and Processing · Vol. 8, Issue 2, 2022 · pp. 43–53 Read article