Search
195 articles for “Compressive strength”
-
Regration Analysis of Compressive Strength of Recycled Aggregate Concrete with Ground Granulated Blast-Furnace Slag and Fly Ash
Abstract: In this research work presents the compressive strength of recycled aggregate concrete (RAC) with recycled coarse aggregate (RCA) that coming from single source and the results of an investigation on the influence of recycled coarse aggregate (RCA) on compressive strength of recycled concrete are accessible. Natural aggregates concrete cubes were cured in normal water for 28-days obtain virgin and RCA. The properties of natural coarse aggregate (NCA) and (RCA) and …
Published in International Journal of Concrete Technology · Vol. 8, Issue 1, 2022 · pp. 9–16 Read article
-
Compressive Strength and Chloride penetration on Semi-Lightweight Concrete Made Up of Artificial Aggregates
Abstract: This paper deals with the properties of semi-Light weight concrete prepared by using Light weight wood ash pellets as coarse aggregates. It can be prepared by varying the cement content from 300 to 450 kg/m3. Optimum design mix can be finalised by studying the engineering properties such as compressive strength, split tensile strength, young’s modulus and rapid chloride penetration test. Various trial mixes have been attempted in the laboratory by …
Published in International Journal of Concrete Technology · Vol. 9, Issue 2, 2023 · pp. 14–25 Read article
-
Mathematical Model to Monitor Concrete Compressive Strength Partially Replaced with Periwinkle and Palm Kernel Shell as Aggregate
Abstract: This research work monitor that application of periwinkle and palm kernel shell as partial replacement for aggregate, the study are carried out applying modeling and simulation techniques, concrete are normally heterogeneous in most cases, but the study try to examine the growth rate of the material on their compressive strength, such process were carried out using these two locally sourced material at different percentage of replacement for aggregate, the study …
Published in International Journal of Construction Engineering and Planning · Vol. 9, Issue 2, 2023 · pp. 6–28 Read article
-
Performance Analysis of High-Volume Fly Ash and Recycled Aggregate in M50 Concrete: Workability and Compressive Strength
Abstract: Abstract This study evaluates the impact of recycled aggregate (RA) and high-volume fly ash (HVFA) on the workability and compressive strength of M50 grade concrete. Slump tests were conducted for various water-cement ratios, using a mix ratio of 1:0.69:2.29 and a high-range water reducer. The compressive strength of concrete mixtures incorporating varying percentages of RA and FA was measured at 7, 28, and 90 days. Results indicate that replacing natural …
Published in International Journal of Concrete Technology · Vol. 10, Issue 2, 2024 · pp. 25–32 Read article
-
Impact of Sugarcane Molasses on Compressive Strength and Workability
Abstract: Molasses used as admixture increase the workability, it is a by-product of sugar industry. In this study, mechanical property such as compressive strength and workability of concrete adding fly ash and sugarcane molasses has been investigated. Adding the molasses in concrete increase the compressive strength, delay the initial and final setting time, reduced the bleeding and segregation of concrete and decrease the W/C ratio. The compressive strength test results showed …
Published in International Journal of Construction Engineering and Planning · Vol. 6, Issue 1, 2020 · pp. 1–5 Read article
-
Optimization of Compressive Strength of Segmental Interlocking Stones
Abstract: The failure of most segmental interlocking stones used as pavement materials is traceable to lack of knowledge of the mix ratios that would optimize the compressive strength of the end products. In this study, the compressive strength was optimized based on Scheffe’s simplex lattice approach. The reliability of model developed was investigated using F-statistic and was found to be adequate. A computer program written in basic language was used to …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 4, Issue 2, 2018 · pp. 1–7 Read article
-
Optimization of Compressive Strength of Snail Shell Ash Blended Cement Concrete
Abstract: In this paper, a mathematical model is developed to optimize the compressive strength and the corresponding values of the mixture proportions of snail shell ash blended cement concrete using Scheffe’s regression method.A computer program written in qbasic language was invoked to quicken the selection of the cheapest mix ratios and the corresponding value of compressive strength of concrete. The mix ratio that optimized the compressive strength was found to be …
Published in International Journal of Construction Engineering and Planning · Vol. 6, Issue 2, 2020 · pp. 29–37 Read article
-
Modeling 28 Days’ Curing Compressive Strength of Concrete Partially Replaced with Palm Kernel Shell as Aggregate Influenced by Porosity
Abstract: Twenty-eight days of curing to determine compressive strength of concrete were carried out throughthe application of modeling and simulation. The development of concrete compressive strength wascarried out by integrating palm kernel shell (PKS) as partial replacement for aggregate. Studies weremonitored to determine its rates of strength development by partially replacing PKS at differentpercentage of 5%, 10%, 15%, 20%, and 25% to determine the optimum compressive strength withinthe applied percentage of …
Published in International Journal of Concrete Technology · Vol. 9, Issue 2, 2023 · pp. 26–40 Read article
-
Empirical Model Relativity of Flexural and Compressive Strength of Concrete Produced with Foundry Waste Sand as Partial Replacement
Abstract: The evaluation presented in this research is to establish the correlation between compressive strength of concrete and flexural strength of concrete of grade 20 at mix ratio of 1:2:4 produced using foundry waste sand as a partial replacement for river sand at different replacement level of 0%, 5%, 10%, 15%, 20% and 25%. The aimed compressive strength was achieved at 15% replacement and the corresponding flexural strength of 3.14 N/mm2was …
Published in International Journal of Concrete Technology · Vol. 4, Issue 1, 2018 · pp. 5–10 Read article
-
Influence of Recycled Aggregate and Steel Fiber on the Compressive Strength of Concrete: A Comparative Study of NAC and RAC Mixes
Abstract: Abstract This study evaluates the impact of varying proportions of recycled concrete aggregate (RCA) and steel fiber content on the compressive strength of concrete mixes. Five concrete mixes were prepared with different percentages of RCA (0%, 25%, 50%, 75%, and 100%), using a constant water-to-cement ratio (w/c) of 0.55. Additionally, each mix included variations with 1% and 2% steel fiber by volume, corresponding to 78.5 kg/m³ and 157 kg/m³, respectively. …
Published in International Journal of Concrete Technology · Vol. 10, Issue 2, 2024 · pp. 11–16 Read article
-
Prediction of Compressive strength of Periwinkle Shell Aggregate Concrete Using a Quadratic Polynomial Function
Abstract: In this study, a mathematical model is developed to predict the compressive strength of normal concrete made with periwinkle shell as coarse aggregate using a quadratic polynomial function. The response function is expressed as a multivariable function of the proportions of the component materials (water, ordinary Portland cement, sand and periwinkle shell). A total of thirty experimental runs were used to demonstrate the applicability of the mathematical model developed. The …
Published in International Journal of Concrete Technology · Vol. 6, Issue 2, 2020 · pp. 10–21 Read article
-
Enhancing Compressive Strength of Geopolymer Concrete with Micro and Macro Steel Fibers: A Study on Fiber-Reinforced Geopolymers
Abstract: AbstractThis research investigates the impact of micro and macro steel fibers on the compressive strength ofgeopolymer concrete (GPC). The study utilizes locally sourced materials, including river sand,granite aggregates, fly ash, and ground granulated blast furnace slag (GGBS) in a 50:50 ratio asalumino-silicate materials. Sodium hydroxide (NaOH) and sodium silicate (Na₂SiO₃) were employedas activators, with the addition of a superplasticizer (Conplast SP430) to enhance workability. FourGPC mixes were analyzed: GPC without …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 10, Issue 2, 2024 · pp. 15–20 Read article
-
Effect of Fly Ash on Compressive Strength of Mortar and Brick Aggregate Concrete
Abstract: This paper presents tse influence of fly ash on compressive strength of mortar and brick aggregate concrete. A lot of tests were done about strength of fly ash concrete all over the world. In those experiments, stone chips were generally used as coarse aggregate. In this experiment locally available materials such as burnt clay brick chips as coarse aggregate, sand and fly ash available in Bangladesh (Indian fly ash) were …
Published in International Journal of Concrete Technology · Vol. 7, Issue 1, 2021 · pp. 7–23 Read article
-
Mathematical Model for the Predictionof Compressive Strength of High Performance Concrete (HPC) Containing Saw Dust Ash and Superplasticizer
Abstract: This paper examined the prediction of compressive strength of High Performance Concrete (HPC) containing Saw Dust Ash (SDA) and Conplast SP 430 (superplasticizer), using Osadebe’s regression theory.The model developed was tested for adequacy at 95 % level of confidence using F-Statistic and was found to be reliable. A computer program written in visual basic 6.0 based on the model formulated was invoked for quick prediction of the mix ratios corresponding …
Published in International Journal of Construction Engineering and Planning · Vol. 6, Issue 2, 2020 · pp. 15–28 Read article
-
Influence of GGBFS Content and Curing Methods on the Compressive Strength of Coconut Shell Concrete: A Mix Design Approach for Sustainable Construction
Abstract: AbstractThis study explores the development of a coconut shell concrete (CSC) mix design using theACI211.298 guidelines, targeting a compressive strength of 20 MPa for structural applications. Dueto the organic and flaky properties of coconut shell (CS), achieving the initial target strength of 40MPa was challenging, necessitating a focus on optimizing mix proportions for a 20 MPa goal. Theresearch investigates three different mixes with varying percentages of ground granulated blastfurnace slag …
Published in International Journal of Structural Engineering and Analysis · Vol. 10, Issue 2, 2024 · pp. 9–14 Read article
-
PREDICTION OF RECYCLED CONCRETE AGGREGATE SELF COMPACTING CONCRETE COMPRESSIVE STRENGTH USING MATHEMATICAL MODEL
Abstract: Sustainable Development aims at improving the standard of life without compromising the environmental qualities and for future needs. These objectives can be achieved through recycling of construction/demolished waste. In Past, land filling of Construction and Demolished waste materials was the general solution. As raw Construction Material Charges have risen dramatically, we have to look for alternative solutions and methods, such as recycling of demolished waste. Recycled Aggregate Concrete not only …
Published in International Journal of Structural Engineering and Analysis · Vol. 5, Issue 2, 2019 · pp. 34–43 Read article
-
Plastics Compressive Strength Testing
Abstract: Compression test is a mechanical test that determines how much compressive force a material to resist before cracking. A gradually applied load compresses the test item, which is commonly in the shape of a square, pyramid, or cylinder, between the platens of a compression-testing machine. Many ductile metals, such as mild steel, have extremely high compression strength, yet measuring them is challenging. Whenever a load is given to a ductile …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 2, 2021 · pp. 46–50 Read article
-
Simulation Models for Flexural and Compressive Strength of Concrete Using Waste Glass as Partial Replacement.
Abstract: The research present the usefulness of waste glass in the production of grade 20 concrete using partial replacement levels of 0%, 20%, 40% and 60%, respectively, for coarse glass and fine glass to coarse aggregate and fine sand aggregate. The results obtained indicate that, for the purpose of construction works, 20% replacement should be adopted either for coarse glass or fine glass replacement. Simulation models were established to predict flexural …
Published in International Journal of Construction Engineering and Planning · Vol. 4, Issue 2, 2018 · pp. 1–7 Read article
-
Assessment of M30 Concrete Compressive Strength Using Digital Rebound Hammer and Destructive Testing
Abstract: Abstract The assessment of in-situ concrete strength using non-destructive testing (NDT) techniques hasbecome increasingly important for quality assurance, structural evaluation, and conditionassessment of concrete infrastructure. Among the available NDT methods, the digital reboundhammer offers a rapid, economical, and non-destructive means of estimating concretecompressive strength. This study experimentally investigates the correlation between reboundnumbers obtained from a digital rebound hammer and the compressive strength of M30 gradeconcrete determined using a Compression Testing …
Published in International Journal of Structural Engineering and Analysis · Vol. 12, Issue 2, 2026 Read article
-
Prediction of Compressive Strength of Concrete with Decision Trees
Abstract: In the past few researchers predicted the compressive strength of concrete from its ingredients employing data driven technique like artificial neural network (ANN) and Decision Tree (DT). For Indian concrete records, only one study was available which had employed ANN for prediction. Evaluation of different performance metrics indicated that there was scope of improvement in the prediction performance. In this paper experimental data from the literature was utilized for development …
Published in International Journal of Concrete Technology · Vol. 2, Issue 1, 2016 · pp. 19–29 Read article