Search
10 articles for “Contact Angle”
-
Wettability of carbon fibers with resin matrices from dynamic contact angle measurements
Abstract: Wettability is the property that quantifies the propensity of a solid surface (carbon fiber) to be covered by a liquid (resin). For a wettable solid, the solid-liquid contact is favoured and as a result the liquid spreads on such surface of the solid. Spreading of the liquid on the solid surface is primarily driven by the adhesive forces between the liquid and the solid, while the inter molecular cohesive forces …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 2, 2025 Read article
-
Electrochemical Etching on Copper Surfaces to Achieve Superhydrophobicity
Abstract: In the present study, an attempt has been made to create superhydrophobicity on copper substrate by etching the surface at different parameters (current density and time). Etching time was varied from 30 to 240 minutes. Untreated copper surface exhibited contact angle of 91.4°. The best etched surface exhibited a maximum contact angle of 142.1° for a current density of 0.01A/cm2 and etching time of 60 minutes. The structure–property relationship of …
Published in International Journal of Manufacturing and Materials Processing · Vol. 5, Issue 1, 2019 · pp. 27–31 Read article
-
A Review on Superhydrophobic Coating for Personal Protective Equipment in Coronavirus (Covid-19) Pandemic
Abstract: Novel coronavirus (COVID-19) infection caused by a newly acquired coronavirus. We have entered the global epidemic. It is important to maintain physical distance to prevent the spread of coronavirus among humans. However, health care workers and other paramedics worked 24 X 7 to rescue patients. While operating, the use of protective equipment is required. The use of protective equipment such as face masks, gloves and aprons is essential to prevent …
Published in International journal of Nanobiotechnology · Vol. 7, Issue 2, 2021 · pp. 10–18 Read article
-
Thermal Management Of Cylindrical Lithium-Ion Battery Using A Wavy Tube
Abstract: To maintain a proper temperature range and eliminate local temperature disparities, thermal management is required for lithium-ion batteries in electric vehicles. A wavy tube is presented for a liquid cooling cylindrical lithium-ion battery module in this research. On the suggested battery module, three-dimensional transient simulations were run, and numerical improvements were made by changing the wavy contact angle of the wavy tube. The heat dissipation efficiency and temperature field homogeneity …
Published in International Journal of Manufacturing and Materials Processing · Vol. 9, Issue 2, 2023 · pp. 10–22 Read article
-
Growth of CNT in a Stainless Steel Surface by Using Gold Nanoparticle as a Catalyst for Corrosion Less Implants
Abstract: Now a day’s maximum implant are failure due to corrosion or infection. And the infection is happened due to growth of Escheria coli, steptococus, miccrobacterium tuberculosis like bacteria. Carbon nanotubes based stainless steel implant may be the promising outcome for corrosion. Carbon nano tubes when irradiate with NIR will heat up to 70oC and it has been demonstrate that folic acid adsorbed on carbon nano tubes allow specific binding to …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 2, Issue 2, 2016 · pp. 1–5 Read article
-
Low temperature plasma treatment of polymeric membranes: a comparative review
Abstract: This paper presents a comparative study of plasma surface modification of various polymeric membranes. Low temperature plasma treatment using pulsed direct current discharge of different gases was employed to enhance hydrophilicity of membranes. Radio frequency discharge of various gases was used to improve surface properties of different polymeric membranes. The enhancement of hydrophilicity of the plasma modified membrane surface was evaluated by measuring the contact angle. The membranes were characterized …
Published in International Journal of Polymer Science and Engineering · Vol. 6, Issue 1, 2020 · pp. 1–19 Read article
-
Morphology and Elemental Composition of Carbon Fibers†
Abstract: Carbon fibers, owing to their unique property of high specific strength, find immense utility in almost all sectors of human activity, ranging from aeronautics, astronautics, geonautics, aquanautics, industry, catalysis, smart materials, defence, and many more. The production, properties, and applications of carbon fibers and related materials are a fertile and fast-growing research area drawing wide attention of researchers worldwide. The key feature of this original research paper is to study …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 1, 2025 Read article
-
One-Step Fabrication of Superomniphobic Pvdf-HFPSiO2Membrane for Long-Term CO2 Absorption inMembrane Gas Absorption System
Abstract: Membrane pore wetting is one of the major challenges for membrane gas absorption, especially when low surface tension liquid absorbents such as amine absorbents are utilized. To minimize diffusion resistance across the membrane, maintaining a non-wetted operating mode in membrane gas absorption is crucial. In this study, a superomniphobic polyvinylidene fluoride-cohexafluoropropylene membrane was fabricated by adding silica nanoparticles (SiO2) in an ethanol coagulation bath through non-solvent-induced phase separation. The surface …
Published in International Journal of Composite Materials and Matrices · Vol. 10, Issue 2, 2024 · pp. 35–44 Read article
-
Facile Fabrication of Durable Superhydrophobic Coatings on SS 304 for biomedical applications
Abstract: A simple and effective method to fabricate durable superhydrophobic coatings by combining shot-blasting and depositing sol-gel nanocomposite coatings on stainless steel SS 304 substrates has been investigated. Shot-blasting was used for two purposes; 1) as a method of physical modification for creating microscale roughness on the substrate and 2) for improving the adhesion of the nanocomposite coatings deposited thereafter. Organic-inorganic hybrid hydrophobic silica sol was synthesized where silica nanoparticles were …
Published in International journal of Nanobiotechnology · Vol. 4, Issue 2, 2018 · pp. 21–34 Read article
-
Analytical Modeling and Simulation of Helical Gear Systems for Improved Load Distribution
Abstract: An analytical modeling and simulation methodology to improving load distribution in helical gear systems is presented in this research study. Fundamental parts of many mechanical systems, helical gears provide the benefits of smooth engagement, lower noise levels, and increased weight bearing capability. However, retaining lifespan and dependability in gear systems requires establishing regular load distribution throughout the gear teeth. This work explores the parameters influencing load distribution and suggests strategies …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 10, Issue 1, 2024 · pp. 1–10 Read article