Search
103 articles for “Cure”
-
A review - Inhancing the Performance of Self-Curing Concrete Using Polyethylene Glycol as an Internal Curing Agent
Abstract: Abstract—This study examines the use of Polyethylene Glycol (PEG-400) as an internal curing agent in concrete, offering a sustainable alternative to traditional water-curing methods. The research addresses the challenge of water scarcity in the construction industry by introducing a self-curing system capable of retaining internal moisture to support prolonged cement hydration. PEG-400, a water-soluble polymer, was added to concrete mixes at different dosages to assess its influence on hydration, shrinkage …
Published in International Journal of Concrete Technology · Vol. 12, Issue 1, 2026 · pp. 1–6 Read article
-
Effect of Accelerated Curing and Normal Curing Regimes on UFGGBFS-Based Semi-Lightweight Concrete
Abstract: This paper deals with the performance of semi-lightweight concrete (sLWC), prepared by using calcite powder pellets as coarse aggregates which was improved by partial replacement of cement with UFGGBFS (ultrafine ground granulated blast-furnace slag). Cement could be replaced by UFGGBFS as 0%, 5%, 10%, 15%, 20%, 25%, 30%, 35%, 40%, 45%, 50%, 55%, 60%, 65%, and 70% to enhance the strength and durability properties of concrete. High-range water-reducing admixtures (HRWA) …
Published in International Journal of Concrete Technology · Vol. 5, Issue 1, 2019 · pp. 1–7 Read article
-
Self-Curing of Concrete Incorporated with Polyethylene Glycol
Abstract: Concrete is a combined mixture of cement, aggregates and water with or without suitable admixtures. Curing is the process of sustaining the proper moisture content to stimulate optimum cement hydration immediately after placement and to achieve desirable strength and other properties. In conventional curing of concrete, this is achieved by external supply of water after mixing, placing and finishing of concrete. In practice, the conventional type of curing is very …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 1, 2017 · pp. 35–48 Read article
-
Study on Properties of Concrete Cured With Poly Ethylene Glycol-600
Abstract: After water, concrete is the most using material globally. Without concrete, the world is unimaginable. The foundation of civilization is concrete. Coarse aggregate, cement ,fine aggregate and water are the main ingredients in concrete, which requires curing to attain its strength. Concrete must therefore cure for 28 days in order to complete the necessary hydration, desired strength. For the traditional curing processes, a lot of water is needed. This becomes …
Published in International Journal of Concrete Technology · Vol. 8, Issue 2, 2022 · pp. 14–21 Read article
-
Influence of GGBFS Content and Curing Methods on the Compressive Strength of Coconut Shell Concrete: A Mix Design Approach for Sustainable Construction
Abstract: AbstractThis study explores the development of a coconut shell concrete (CSC) mix design using theACI211.298 guidelines, targeting a compressive strength of 20 MPa for structural applications. Dueto the organic and flaky properties of coconut shell (CS), achieving the initial target strength of 40MPa was challenging, necessitating a focus on optimizing mix proportions for a 20 MPa goal. Theresearch investigates three different mixes with varying percentages of ground granulated blastfurnace slag …
Published in International Journal of Structural Engineering and Analysis · Vol. 10, Issue 2, 2024 · pp. 9–14 Read article
-
Experimental Study on the Properties of Self-Curing Concrete
Abstract: This paper highlights the effect of curing agent polyethylene glycol (PEG-400) in the performance of concrete. The chemical agent PEG is used with different percentage; 1%, 2% and 3% to the weight of cement. Super plasticizer named glenium was used to improve the workability of concrete. The property such as compressive strength and split tensile strength of concrete was examined with normal curing and self-curing at 7 days and 28 …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 8–13 Read article
-
Influence of GGBFS on the Mechanical Properties of the Water Cured Fly Ash Aggregate-Based Geopolymer Concrete
Abstract: Abstract Conventional concrete consists of cement, sand as fine aggregate and gravel, limestone or granite in various sizes and shapes as coarse aggregate including with water. In the present work, the feasibility of using industrial inorganic polymeric residues wastes as a total (100%) replacement to the traditionally used normal conventional concrete materials is examined in the preparation of the geopolymer concrete (GPC). In this GPC, the cement is totally replaced …
Published in International Journal of Concrete Technology · Vol. 2, Issue 1, 2016 · pp. 54–64 Read article
-
Physical Property of Self-Curing Concrete With Shrinkage Reducing Agent
Abstract: Water is a most widely used material for construction work, it is essential for concreting work or plastering work, etc. Curing is the process for controlling the temperature and consists of moisture movement from and into the concrete and the hydration of the cement and consequently continuous increase in the strength and Curing allows continuous hydration of cement, when curing stops strength increasing of the concrete also stops. The aim …
Published in International Journal of Water Resources Engineering · Vol. 3, Issue 1, 2017 · pp. 29–33 Read article
-
Green Routes for Modification of Cure Characteristics and Mechanical Properties of Rubber Compound
Abstract: Compounding of rubber is very crucial to make the raw rubber suitable for its end use. Term Compounding of rubber refers to the selection and mixing the different ingredients that fulfil the processing, performance, cost requirements of finished rubber products. The compounding ingredients include fillers, reinforcements, plasticizers, curatives, accelerators, stabilizers etc. The curatives play key role in the formation of crosslink or vulcanisation. Since Ionic level (IL) has very low …
Published in International Journal of Green Chemistry · Vol. 3, Issue 1, 2017 · pp. 1–9 Read article
-
EFFECT OF GREEN LIQUID ON CURE CHARACTERISTICS AND PHYSICAL PROPERTIES OF NBR/PVC BLEND
Abstract: Compounding or formulation refers to the addition of certain chemicals to raw rubber in order to obtain the desired properties which are to be prepared by mixing additives to fulfil the processing, performance and economic statistics of rubber products. The common chemicals and for alternation of such properties are cross linking agents, reinforcement agents, antidegradants, plasticizers, curatives and stabilizers. The present communication report synthesis of Ionic Liquid and effect of …
Published in International Journal of Green Chemistry · Vol. 5, Issue 1, 2019 · pp. 1–6 Read article
-
Modeling 28 Days’ Curing Compressive Strength of Concrete Partially Replaced with Palm Kernel Shell as Aggregate Influenced by Porosity
Abstract: Twenty-eight days of curing to determine compressive strength of concrete were carried out throughthe application of modeling and simulation. The development of concrete compressive strength wascarried out by integrating palm kernel shell (PKS) as partial replacement for aggregate. Studies weremonitored to determine its rates of strength development by partially replacing PKS at differentpercentage of 5%, 10%, 15%, 20%, and 25% to determine the optimum compressive strength withinthe applied percentage of …
Published in International Journal of Concrete Technology · Vol. 9, Issue 2, 2023 · pp. 26–40 Read article
-
Prevention is better than cure – Soft drinks
Abstract: Sugar-sweetened beverages (SSBs) margins to levy inspired more to marketing of low sugar drinks. Sports drink margins weight in case of variation in consumptions. Fatigue by dehydration reversed by weight gain keeping drink rate same. Legislation controversies arose from competence of whole energy intake to devaluate soft drink from imbalanced liquid intake fronts. Effects additive from any contamination as well as over dosage of diet drinks produce controversies in calorie. …
Published in International Journal of Chemical Separation Technology · Vol. 5, Issue 2, 2019 · pp. 44–48 Read article
-
Optimizing Characteristics of Ferro-Geopolymer Composites for Structural Applications
Abstract: Abstract This study focuses on developing an optimal mix for geopolymer mortar (GPM) using varying molarities of NaOH solution and different binder-to-aggregate ratios. The primary objective was to determine the mix that yields the highest compressive strength. GPM cubes were prepared and subjected to two curing methods – oven curing and steam curing. Compressive strength tests were conducted at 3, 7, and 28 days. The results show that the compressive …
Published in International Journal of Concrete Technology · Vol. 10, Issue 2, 2024 · pp. 17–22 Read article
-
Mesh to Shrink in Nano Fabricated Compose
Abstract: This article is study about shrink of polymer originated composes. Aim has been inclusive from nano- based fillers on hybridized consequence from polymeric effects. Otherwise, descriptive issues have ever arose to link accession to repair dental simulated perversions. Nanotechnology in material formulation has been production of functional structures in range of 0.1 to 100 nm. Advantages of these composites have inherent shrinkage of cure mode in accordance to monomers said …
Published in International Journal of Applied Nanotechnology · Vol. 7, Issue 2, 2021 · pp. 1–12 Read article
-
Analysis of Mechanical Attributes of Nano clay Reinforced Polymer Composites
Abstract: Composite material provide a Higher and unique mechanical and physical attributes because of its combines the most unique attributes of its composition while underlying their least advantageous attributes . Composites have been widely used in various application starting from aerospace , Manufacturing plants , Electrical equipment's , Marine , Automotive ,Civil Infrastructure , Corrosive Environment’s ,Whereas the Epoxy which are the cured components of two chemical functional group namely polyepoxides …
Published in International Journal of Manufacturing and Materials Processing · Vol. 7, Issue 1, 2021 Read article
-
Enhancing Geopolymer Concrete Properties Through Processed Fly Ash and Alccofine Integration
Abstract: Abstract Geopolymer concrete (GPC) is gaining attention as a sustainable alternative to ordinary Portland cement (OPC) due to its potential to reduce the environmental impact of cement production, which accounts for roughly 7% of global CO2 emissions. This study investigates the use of processed fly ash and alccofine as key ingredients in GPC to improve its workability and compressive strength. Experimental tests were conducted to evaluate the effects of different …
Published in International Journal of Construction Engineering and Planning · Vol. 10, Issue 2, 2024 · pp. 1–8 Read article
-
Experimental Study of Mechanical Properties Geopolymer Concrete.
Abstract: This experimental study aimed to define the parameters for optimum mix design of geopolymer concrete made by partial replacement of cement. The geopolymer concrete is nothing but the formation of fly ash and alkali activators. Fly ash is the waste product from the thermal power station and may use as the pozzolanic material. But, only fly ash is may not the only replacement for the cement, for the more binding …
Published in International Journal of Concrete Technology · Vol. 5, Issue 2, 2019 · pp. 16–22 Read article
-
Properties of Bentonite Stabilised with Fluorogypsum
Abstract: This paper presents the properties of the bentonite stabilised with fluorogypsum. For this purpose, commercially available bentonite and fluorogypsum were used in this investigation. The fluorogypsum content and the curing period were varied from 0% to 10 % and 0 to 28 days respectively. Compaction tests results reveal that the maximum dry unit weight increases and optimum moisture content decreases with the increase in the fluorogypsum content to the bentonite. …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 6, Issue 1, 2020 · pp. 43–53 Read article
-
Sugar Powder Impact on Strength of Concrete
Abstract: Abstract This experimental study examines the effect of adding sugar powder to concrete on its compressive strength. The research explores how sugar powder, when used as an additive in concrete mixtures, alters the concrete’s structural performance, particularly in terms of its ability to resist compressive forces. Through systematic testing and analysis, the study aims to determine the extent to which sugar powder can influence the strength and durability of concrete, …
Published in International Journal of Concrete Technology · Vol. 11, Issue 1, 2025 · pp. 15–21 Read article
-
Indian Green Flora-“Ramban” to Asthma
Abstract: Some Population India and in world is affected by Bronchoconstriction and asthma. There is one of the severe disorder to which emergency medicine should be availablE. There are allopathic, Ayurvedic, siddha, Unani and Homeopathic medicine are available certain restriction are made with the use of such bronchodilator. If the population of such disease is not cure by proper medicament then it may cause unhealthy and disturbed economic condition to individual, …
Published in International Journal of Green Chemistry · Vol. 9, Issue 2, 2023 · pp. 15–25 Read article