Search
152 articles for “bio-composites”
-
Production of Composite Biodiesel from Pongamia & Simarouba oil and Comparison of Performance of Composite Biodiesel with Diesel
Abstract: Pongamia oil and simarouba oil are mixed in equal volume to prepare the composite oil. The composite oil is processed through two stage transesterification process to produce composite biodiesel. The composite biodiesel blends are prepared by mixing neat biodiesel with diesel by 5%, 10% and 20% volume respectively. The engine control factors viz., injection pressure, injection timing and fuel preheating temperature are considered for evaluating the performance of composite biodiesel …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 9, Issue 2, 2023 · pp. 1–9 Read article
-
Recent Trends in Bio Ceramic and Polymer Compositesfor Biomedical and Dental Applications
Abstract: Advanced biomaterials with great promise for use in dental and biomedical applications are bio-ceramic and polymer composites. These composites combine the flexibility, biodegradability, and processability of polymers with the mechanical strength, bioactivity, and biocompatibility of bio-ceramics. Clinical success is often limited by the biological response and tissue compatibility of conventional materials such as metals and single-phase ceramics. Oste conductivity and bone-like characteristics are exhibited by bio-ceramic materials, such as hydroxyapatite …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 2, 2025 · pp. 1–5 Read article
-
Energy-Efficient Building Envelopes: Exploring Bio-Composite as PCM
Abstract: The building sector is a significant contributor to global energy consumption, driving the need for innovative and sustainable energy efficiency solutions. This study investigates the potential of integrating bio-composite phase change materials into building envelopes to improve thermal performance and reduce energy demand. A novel bio-composite phase change material was developed, and its thermal properties, including latent heat capacity and melting temperature, were characterized through laboratory testing. The material was …
Published in International Journal of Sustainable Building Technology · Vol. 8, Issue 2, 2025 · pp. 17–24 Read article
-
Bio-based Composites for Sustainable Construction
Abstract: Bio-based composites are gaining significant attention as sustainable construction materials due to their eco-friendly nature and potential to reduce the environmental impact of traditional construction materials. This paper provides an overview of bio-based composites and their applications in sustainable construction. The use of bio-based materials, such as natural fibres, bio-based resins, and bio-based fillers, in composites offers several advantages, including reduced carbon footprint, renewable sourcing, and improved energy efficiency.The properties …
Published in International Journal of Composite and Constituent Materials · Vol. 9, Issue 2, 2023 · pp. 75–80 Read article
-
Experimental Based Analysis of Minor BioactiveCompound Composition of Avocado, Mango and NativePear Seed oil for Pharmaceutical Utilization
Abstract: Oil was extracted from avocado, mango and native pear seed through the mechanism of mechanothermal techniques. In this process no solvent was added for the purpose of the oil recovered rather themechanism of extraction was mainly mechanical and distillation process. The different oils recoveredfrom the process were subjected to pharmaceutical analysis to ascertain the properties of some minorbioactive compounds and their compositions in relation to the three samples of the …
Published in International Journal of Chemical Separation Technology · Vol. 10, Issue 1, 2024 · pp. 15–26 Read article
-
Comprehensive Review on Bamboo-Based CompositeMaterials for Sustainable Engineering Applications
Abstract: Among various natural resources, bamboo has emerged as a promising reinforcement material due to its rapid growth rate, wide availability, low cost, and excellent specific mechanical properties. Bamboobased composite materials combine high strength-to-weight ratio with renewability, making them attractive for diverse engineering applications. The increasing concerns related to resource depletion, carbon emissions, and end-of-life disposal of synthetic composites further highlight the need for biobased and sustainable material solutions. This review …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 1, 2026 · pp. 1–8 Read article
-
Deployment of SEED Sensors Using Biocomposite Substrate Based on RFID Technology
Abstract: As normal assets keep on turning out to be progressively scant internationally, cultivating innovation for agrarian creation to take care of the world has been headed to turn out to be more exact and productive. As of late a sensor has been created to address these necessities by straightforwardly checking the dirt climate remotely to assist with further developing harvest wellbeing and yields. The Sensing Earth Environment Directly (SEED) sensor …
Published in International Journal of Composite and Constituent Materials · Vol. 8, Issue 1, 2022 · pp. 33–40 Read article
-
Environmentally Friendly Green Composites - Latest Developments
Abstract: Composites are one of the most widely used materials because they can adapt to a variety of situations. Other composites include metal matrix composites, nanocomposites, fiber composites, and hybrid composites, and are used in many industries. We are now focusing on creating environmentally friendly composites. Green composites are a special type of biocomposites with the addition of a bio-based polymer matrix. Natural fibers represent an area of polymer research. Green …
Published in International Journal of Composite Materials and Matrices · Vol. 10, Issue 1, 2024 · pp. 32–40 Read article
-
Synthesis of Biodegradable Nano Composite of PMMA vinyl Polymer with Corn Cob
Abstract: Vinyl polymers are the largest category of polymers which have wide applications. PMMA is important vinyl polymer which when modified with with Corn Cob(agricultural waste) for nanocomposite formation, then it may result biodegradable modified polymer. Corn cobs (focal piece of maize) are either treated as waste or consumed as fuel causing ecological concern. So as to accomplish its worth option in new research regions, corn cob can be prepared synthetically …
Published in International Journal of Polymer Science and Engineering · Vol. 6, Issue 1, 2020 · pp. 20–24 Read article
-
A Model for Plastic-Hydrolytic Damage Bioresorbable Polymer Composites
Abstract: This paper explains and assesses a recently developed constitutive model for elastic-damage that may sustain plastic-hydrolytic damage. When a metallic material is subjected to plastic strain, voids and microcracks in the metal matrix start to form, develop, and merge. This is what causes ductilitydegradation in metals. Only a few of the many models that have been presented to depict ductile failure have done a thorough analysis of the entire damage …
Published in International Journal of Composite Materials and Matrices · Vol. 8, Issue 1, 2022 · pp. 23–27 Read article
-
Walnut Shells’ Potential Use as Biofillers in Natural Rubber Composites
Abstract: The study assessed the potential of walnut shells as a filler in natural rubber composites. Walnut shells were finely ground, sieved through a 75 μm mesh, and incorporated into natural rubber at different filler loadings: unfilled, 20 parts per hundred rubber (phr), 30 phr, 40 phr, and 50 phr. The physicochemical properties of the walnut shell powder were analyzed, yielding results of 5.30 for pH, 10.10% for moisture content, 2.50% …
Published in International Journal of Polymer Science and Engineering · Vol. 10, Issue 2, 2024 · pp. 1–5 Read article
-
The Potential Application of Walnut Shells as Biofillers for Natural Rubber Composites
Abstract: It was evaluated whether walnut shells should be used as filler in composites made of natural rubber. Samples of walnut shells were ground to fine powders, sieved through a 75 μm mesh, and were used in compounding natural rubber using varying filler loading of unfilled, 20 hpr, 30 hpr, 40 hpr, and 50 hpr. The physicochemical analysis results of the walnut shell powder were 5.30, 10.10%, 2.50%, 43.70%, 49.70 mg/g, …
Published in International Journal of Composite Materials and Matrices · Vol. 8, Issue 2, 2022 · pp. 30–34 Read article
-
Bioelectrical Impedance Analysis in Body Composition
Abstract: The characteristic of measurement method of bio-impedance has demonstrated to be of non-invasive nature henceforth is a significant aim for accepting this method in medical investigation. BIA is an energetic and valuable technique for determining the total configuration of the body. Investigation of Bio-impedance shows an energetic role in the valuation of well-being and nutritional value of the body. By altered united circuits dissimilar methods for extent of body composition …
Published in International Journal of Analog Integrated Circuits · Vol. 1, Issue 1, 2015 · pp. 35–42 Read article
-
Systematic literature Review of PLA-Magnesium Composite Material for Fused Deposition Modelling for Biomedical Applications
Abstract: Magnesium is one of most liberally available metal in nature forming about 2% of earth’s crust. Polylactic acid or Polylactide is a bioplastic. Magnesium-Polylactide composites are a promising new form of biodegradable materials with established good mechanical properties. Our critical survey of research papers helped us to compile information about fabrication and treatment of this composite material using various techniques and methodologies to understand prospects for future research for FDM …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 6, Issue 1, 2020 · pp. 1–4 Read article
-
A-Survey on Natural Fibers
Abstract: In the last thirty years of composite materials, ceramics and plastics have been important emerging materials. The number of application of composite materials has been grown consistently, penetrating and winning new market requirement continuously. The composite materials forms a significant proportion of the engineered materials their worth as weight saving materials; the present aim is to make them as cost effective. This survey paper discuss about worldwide collection of natural …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 1, 2020 · pp. 17–28 Read article
-
Biopolymers in Medical Application: A Study
Abstract: Biopolymers – naturally derived macromolecules, such as polysaccharides, proteins, and polyhydroxyalkanoates – have emerged as a versatile toolbox for next-generation medical technologies. Their intrinsic biocompatibility, tunable degradation kinetics, and capacity for molecular functionalization enable the design of devices that communicate with living tissue rather than merely coexist with it. This review synthesizes recent advances across four inter-related fronts: (i) drug-delivery carriers, where chitosan-based nanoparticles and hyaluronic-acid hydrogels provide stimulus-responsive release …
Published in International Journal of Polymer Science and Engineering · Vol. 11, Issue 2, 2025 · pp. 1–15 Read article
-
Thermal and structural properties of surface treated ragweed fiber reinforced biodegradable polylactic acid biocomposites
Abstract: Natural fiber-reinforced composites (NFRC) are becoming more popular as technological advance recognizes the need for eco-friendly materials. This work presents Giant ragweed (Ambrosia trifida) as a new composite reinforcement material into polylactic acid (PLA) matrix to form novel natural fiber-reinforced composites. Different types of retting techniques are utilized, and hydrogen peroxide retting is proven to provide the most optimized properties. The fibers are taken through subsequent extraction and grinding processes. …
Published in International Journal of Composite and Constituent Materials · Vol. 8, Issue 2, 2022 · pp. 13–31 Read article
-
Applications of Bionanocomposites in Healing & Treatment of Tendon & Ligament Injuries.
Abstract: Tendon and tissue injuries are difficult to manage because of their poor natural healing ability and the risk of scar tissue and reinjury. Nanotechnology has created materials that can closely mimic natural biological structures, opening up new possibilities for regenerative medicine in recent years. In the creation of scaffolds and delivery systems for tissue repair, nanomaterials are very useful. The extracellular matrix's nanoscale configuration is replicated using electrospun nanofiber scaffolds, …
Published in International Journal of Composite and Constituent Materials · Vol. 12, Issue 1, 2026 · pp. 17–41 Read article
-
Potato Starch-Based Polyethylene Composite: Fabrication and Evaluation
Abstract: This study's objective was to create and evaluate a biodegradable polymer composite consisting of potato starch (PS) and low-density polyethylene (LDPE). The effects of changing the PS content (10– 40 wt%) on the mechanical (elongation at break and tensile modulus), thermal (heat conductivity), and biodegradability characteristics of the polymer composite were examined. Next, it was examined how the cross-linking agent influenced the polymer composite's mechanical and thermal properties. The melt …
Published in International Journal of Chemical Separation Technology · Vol. 8, Issue 2, 2022 · pp. 32–44 Read article
-
Chemical Treatments to Modify the Surface of Agricultural Waste Fibers as a Green Substitute to Cellulosic Fiber Treatment
Abstract: Scientists are searching for natural elements that can decompose naturally and replace synthetic materials that have not been biodegradable for a while. The automotive, space, furniture, construction, medical, and packaging industries are among the many that use synthetic composite materials. This has resulted in growing interest in biodegradable bio composites. In recent years, a variety of stem fibers, including jute, flax, hemp, and kenaf, have been employed to replace the …
Published in International Journal of Composite and Constituent Materials · Vol. 11, Issue 1, 2025 · pp. 35–45 Read article