Search
59 articles for “corrosion resistance”
-
Tailoring Electrolytic Deposition of Zn-Ni Alloys for Superior Corrosion Resistance in Harsh Environments
Abstract: Since Zn–Ni alloy coatings are more resistant to corrosion than pure zinc coatings, they are being researched extensively. In this study, Zn–Ni alloy coatings electrolytically deposited from an acidic sulfate bath are investigated. The study looks into how the microstructure, phase composition, and corrosion resistance of the coatings are affected by deposition factors like pH, current density, and electrolyte composition. X-ray diffraction (XRD), potentiodynamic polarization, and scanning electron microscopy (SEM) …
Published in International Journal of Chemical Engineering and Processing · Vol. 11, Issue 1, 2025 Read article
-
Corrosion Resistance in Modern Metallurgical Alloys: Mechanisms & Mitigation Strategies
Abstract: Corrosion resistance in metallurgical alloys is a critical factor in their application across various industries, including aerospace, automotive, marine, and construction. This paper delves into the fundamental mechanisms of corrosion, such as galvanic, pitting, crevice, intergranular, and stress corrosion cracking, which significantly affect the longevity and reliability of alloys. It explores the intrinsic and extrinsic factors influencing corrosion behavior, including alloy composition, microstructure, environmental conditions, and mechanical stresses. Advancements in …
Published in International Journal of Metallurgy and Alloys · Vol. 9, Issue 2, 2023 · pp. 30–34 Read article
-
MWCNT AND GRAPHENE FOR IMPROVED CORROSION RESISTANCE OF MILD STEEL
Abstract: ABSTRACTThe protective coating method is a passive corrosion protection technique. The protective coating detaches the metallic surfaces from the aggressive media, such as moisture, salts, acids etc. Nanotechnology is a relatively modern development in scientific research, the development of this concept occurred over a very short period of time. One technique that has recently been used to increase the adhesive and anti-corrosive properties of polymer coatings is the addition of …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 2, 2020 · pp. 12–17 Read article
-
CORROSION RESISTANCE OF BINARY AND TERNARY ALLOY COATINGS FROM ACID SULPHATE BATH
Abstract: Electroplating of three binary (Zn-Ni, Zn-Co and Zn-Fe) and two ternary (Zn-Ni-Co and Zn-Co-Fe) alloy coatings were developed onto mild steel substrate using 2-((4-chlorophenyl) amino)-1-(6-methyl-1H-pyrazolo [3, 4 - b] quinolin-1-yl) ethanone (CME) as an additive. Hull cell technique was used to optimize the bath constituents and operating conditions. Corrosion rate of binary and ternary alloy coatings were determined using potentiodynamic polarization method. Corrosion rate of ternary Zn-Ni-Co alloy coating was …
Published in International Journal of Analytical and Applied Chemistry · Vol. 6, Issue 2, 2020 · pp. 12–16 Read article
-
Mechanical and Microstructure Properties of Al and SiC Reinforced Aluminum-Based Metal Matrix Composite
Abstract: It is becoming increasingly difficult to design new technical materials that are resistant to wear damage and corrosion degradation in severe service circumstances. Unfortunately, even with crucial passive metals, like Al alloys, there is often a compromise between wear and corrosion resistance. Because of the unfavorable galvanic connection between the precipitates and the matrix, precipitates not only harden the material but also accelerate corrosion. This research established that a supersaturated …
Published in International Journal of Metallurgy and Alloys · Vol. 11, Issue 1, 2025 · pp. 26–43 Read article
-
Analysis of Surface Finish of Different Metallic Materials
Abstract: This study investigates surface processing techniques aimed at achieving a surface roughness (Ra) value of < 2.5 for various materials including gray iron, steel, pure copper, aluminum, and brass. Surface roughness plays a crucial role in determining the functional and aesthetic properties of machined components. The attainment of a specific Ra value demands precise control over machining parameters and selection of appropriate finishing processes. For steel, machining operation grinding followed …
Published in International Journal of Mechanics and Design · Vol. 10, Issue 1, 2024 · pp. 1–12 Read article
-
Nanotechnology in Refractory Materials: Innovations and Applications
Abstract: Nanotechnology has become a focal point of research across diverse scientific fields, including chemistry, medicine, materials science, and engineering. Its integration into refractory products has led to groundbreaking advancements in industries such as steel, glass, casting, and cement, particularly using nanomaterials like nanoparticles, nano additives, and nanostructured materials. This article provides an in-depth examination of the latest developments in monolithic refractories, focusing on how nanotechnology has enhanced their performance, durability, …
Published in International Journal of Metallurgy and Alloys · Vol. 10, Issue 1, 2024 · pp. 7–11 Read article
-
A look at friction stir processing for making better surface properties
Abstract: Abstract Friction stir processing is a surface properties modification method consequential from friction stir welding. The process uses a non-consumable tool made up of tool steel material. The tool pin and shoulder plunged in the surface of the base material plates and it mover along the predetermined path. The frictional heat stimulates the plastic deformation during the process & enhances the dynamic recrystallization. The process represents an advanced approach that …
Published in International Journal of Manufacturing and Materials Processing · Vol. 11, Issue 2, 2025 · pp. 41–47 Read article
-
Electrolytic Deposition of Zn–Ni Alloy from Acidic Sulphate Bath and Their Characterization
Abstract: A bath containing ZnSO4.7H2O, NiSO4.7H2O, thiamine hydrochloride (THC) and citric acid (CA) has been proposed. Bright Zn–Ni alloy coatings were developed galvanostatically onto mild steel (MS) and their corrosion resistance and other physical properties were studied. THC was found to improve the brightness and homogeneity of the deposit. The dependency of bath composition, current density (c.d.), pH and temperature, agitation on wt.% Ni were tested. Deposition was carried out under …
Published in International Journal of Chemical Engineering and Processing · Vol. 2, Issue 2, 2016 · pp. 19–32 Read article
-
Facile Fabrication of Durable Superhydrophobic Coatings on SS 304 for biomedical applications
Abstract: A simple and effective method to fabricate durable superhydrophobic coatings by combining shot-blasting and depositing sol-gel nanocomposite coatings on stainless steel SS 304 substrates has been investigated. Shot-blasting was used for two purposes; 1) as a method of physical modification for creating microscale roughness on the substrate and 2) for improving the adhesion of the nanocomposite coatings deposited thereafter. Organic-inorganic hybrid hydrophobic silica sol was synthesized where silica nanoparticles were …
Published in International journal of Nanobiotechnology · Vol. 4, Issue 2, 2018 · pp. 21–34 Read article
-
Utility of Corrosion Inhibitors for the Corrosion Protection of Materials in Hostile Environments
Abstract: The term “inhibitor” refers to a material that reduces the rate of corrosion in an environment when added in trace amounts. As a result, the inhibitor functions as a catalyst for those delays. Inhibitors come in a wide variety of forms and formulations. The two most crucial considerations when choosing materials for industrial applications are cost and safety. Physical criteria are typically simple to achieve, but corrosion resistance presents significant …
Published in International Journal of Energetic Materials · Vol. 12, Issue 1, 2026 · pp. 27–34 Read article
-
Production of Compositionally Modulated Nanolayer Zn–Ni Alloy Coatings and Their Corrosion Behaviours
Abstract: Compositionally modulated nanolayer alloy (CNA) coatings of Zn–Ni having alternatively the same compositions have been developed galvanostatically on mild steel from single bath technique (SBT) using square current pulses. Sulphanilic acid and citric acid (CA) were used as additives. Modulation in the composition of alloys were introduced by passing a different switched cathode current densities (SCCD’S) using sophisticated power sources. Variety of CNA coatings was developed under different conditions of …
Published in International Journal of Chemical Engineering and Processing · Vol. 3, Issue 1, 2017 · pp. 1–8 Read article
-
Effects of Tungstate and Nitrite Ions as Corrosion Inhibitor for Cr-10Zr-10W Alloy in 0.5 M NaCl Solution
Abstract: The effect of different concentrations of tungstate and nitrite ions as corrosion inhibitors on the corrosion behavior of the sputter-deposited ternary Cr–10Zr–10W alloy was studied in 0.5 M NaCl solution open to air at 25±1°C using corrosion tests and corrosion potential measurement. The use of both the tungstate and nitrite ions enhanced the corrosion resistance properties of the alloy in 0.5 M NaCl solution. It is found that the tungstate …
Published in International Journal of Metallurgy and Alloys · Vol. 5, Issue 1, 2019 · pp. 11–19 Read article
-
Magneto-electrodeposition of Sn–Ni alloy Coating for Better Corrosion Protection
Abstract: The present paper reports the development of excellent corrosion resistant Sn–Ni alloy coatings from a new pyrophosphate bath by magneto-electrodeposition (MED) approach. First part reports optimization of conditions for deposition of Sn–Ni coatings on mild steel by conventional electrodeposition (ED) method and their characterization. The second part demonstrates how the corrosion resistance of Sn–Ni alloy coatings can be improved drastically by MED method, using same bath. Significant decrease of corrosion …
Published in International Journal of Chemical Engineering and Processing · Vol. 2, Issue 1, 2016 · pp. 29–42 Read article
-
Electrodeposition of Bright Zn–Co–Fe Alloy Coatings on Mild Steel and Their Characterization
Abstract: Sulphate bath having ZnSO4. 7H2O, CoSO4. 7H2O, FeSO4.7H2O and thiamine hydrochloride (THC) and citric acid (CA) in combination, was optimized for deposition of bright Zn–Co–Fe alloy coating on mild steel. Bath constituents and operating parameters were optimized by Hull cell method, for highest corrosion performance against coating. The effect of current density on deposit characters viz., corrosion resistance, hardness, thickness, CCE were evaluated. Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) …
Published in International Journal of Analytical and Applied Chemistry · Vol. 2, Issue 2, 2016 · pp. 17–25 Read article
-
Review On Bipolar Plate Geometric Design and Materials for Proton Exchange Membrane Fuel Cell Applications
Abstract: Abstract Bipolar plates (BPs) are vital components in proton exchange membrane fuel cells (PEMFCs), performing multiple essential functions that directly influence system efficiency, durability, and overall operational performance. They ensure uniform distribution of reactant gases across the active area, provide electrical conductivity between adjacent cells, assist in effective thermal management by dissipating heat generated during electrochemical reactions, and maintain proper sealing to prevent leakage of gases and coolant. Among these …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 11, Issue 2, 2025 · pp. 40–56 Read article
-
Exploring Alloys: Properties, Applications, and Future Trends
Abstract: Alloys, integral to modern technology and engineering, are combinations of metals with other elements designed to enhance material properties. This exploration delves into the diverse properties, widespread applications, and emerging trends in alloy development. The study examines mechanical properties such as strength, ductility, and corrosion resistance, which are tailored through compositional variations and processing techniques. Applications across various industries—including aerospace, automotive, electronics, and biomedical fields—are highlighted, showcasing the versatility and …
Published in International Journal of Metallurgy and Alloys · Vol. 9, Issue 1, 2023 · pp. 13–19 Read article
-
Experimental Investigation on Shear & Flexural Behavior of GFRP-Reinforced Concrete Beam
Abstract: Reinforced concrete (RC) beams are among the most commonly used structural elements in civil engineering structures. However, the long-term durability of conventional steel reinforcement is often affected by corrosion when exposed to aggressive environmental conditions, which can significantly reduce the service life and structural performance of concrete members. In recent years, Glass Fiber Reinforced Polymer (GFRP) bars have emerged as a promising alternative reinforcement material due to their high tensile …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 12, Issue 2, 2026 Read article
-
Analysis and Design of Structural Components in Offshore and Marine Engineering
Abstract: Offshore and marine engineering play a pivotal role in the global energy market, particularly in the oil and gas industry. The structural integrity of components in such challenging environments is critical, as they are exposed to harsh conditions including high winds, waves, and corrosion. This research paper aims to explore the analytical and design principles for structural components used in offshore and marine engineering, emphasizing materials, loading conditions, failure mechanisms, …
Published in International Journal of Mechanics and Design · Vol. 10, Issue 2, 2024 · pp. 1–6 Read article
-
Experimental Investigation on Shear & Flexural Behaviour of GFRP-Reinforced Concrete Beam
Abstract: Reinforced concrete (RC) beams are among the most commonly used structural elements in civil engineeringstructures. However, the long-term durability of conventional steel reinforcement is often affected bycorrosion when exposed to aggressive environmental conditions, which can significantly reduce the servicelife and structural performance of concrete members. In recent years, Glass Fiber Reinforced Polymer(GFRP) bars have emerged as a promising alternative reinforcement material due to their high tensilestrength, light weight, and excellent …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 12, Issue 2, 2026 Read article