Search
57 articles for “fillers”
-
Effects of Industrial Waste Filler Content and Compatibilizer on the Performance of Thermoplastic Polymer Composites
Abstract: In this study, we examine the physico-mechanical characteristics of waste filler-thermoplastic polymer composites in relation to the industrial waste filler mixing ratio and compatibilizer concentrations. Three degrees of coupling agent (Epolene E-43) content and four levels of waste filler to thermoplastic polymer mixing ratios were used in the experiment to examine the physical and mechanical characteristics of the composite. As was to be predicted, composite density grew as waste filler …
Published in International Journal of Applied Nanotechnology · Vol. 9, Issue 2, 2023 · pp. 12–21 Read article
-
Effect of Nano-Fillers on the Mechanical and Fracture Behavior of Polymer Composite Matrices: A Review
Abstract: The modification of polymer composite matrices through the incorporation of nano-scale fillers has become a prominent and highly effective strategy for enhancing mechanical performance, stiffness, and fracture resistance. Unlike conventional micro-scale reinforcements, nano-fillers possess exceptionally high surface area–to–volume ratios and unique physicochemical characteristics that significantly influence interfacial phenomena within the polymer matrix. Materials, such as carbon nanotubes (CNTs), graphene nanoplatelets (GNPs), nano-silica, and layered silicate nanoclays, introduce advanced toughening mechanisms …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 1, 2026 · pp. 31–36 Read article
-
Self-healing Polymer Nanocomposites study using filler effect
Abstract: Polymers, while versatile, often lack the desired mechanical strength, thermal stability, or barrier properties for high-performance applications. This limitation is elegantly addressed by creating polymer nanocomposites. These materials are formed by incorporating small amounts (typically 1-5 wt%) of nanoscale fillers (e.g., carbon nanotubes, graphene, silica, clay, metal oxide nanoparticles) into a polymer matrix. The magic of nanocomposites lies in the incredibly high surface area-to-volume ratio of the nanoparticles and their …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 11, Issue 2, 2025 Read article
-
A Study of Self-Healing Polymer Nanocomposites with Filler Effect
Abstract: Considering their versatility, polymers sometimes lack the barrier properties, mechanical strength, and thermal stability required for high-performance applications. The creation of polymer nanocomposites is an advanced solution to this restriction. To make these materials, nanoscale fillers like carbon nanotubes, graphene, silica, clay, and metal oxide nanoparticles are added to a polymer matrix in small amounts (typically 1–5% weight percentage). The nanoparticles’ incredibly high surface area-to-volume ratio, as well as their …
Published in International Journal of Applied Nanotechnology · Vol. 12, Issue 1, 2026 · pp. 26–35 Read article
-
Self-healing Polymer Nanocomposites study using filler effect
Abstract: Polymers, while versatile, often lack the desired mechanical strength, thermal stability, or barrierproperties for high-performance applications. This limitation is elegantly addressed bycreating polymer nanocomposites. These materials are formed by incorporating small amounts(typically 1-5 wt%) of nanoscale fillers (e.g., carbon nanotubes, graphene, silica, clay, metaloxide nanoparticles) into a polymer matrix. The magic of nanocomposites lies in the incrediblyhigh surface area-to-volume ratio of the nanoparticles and their unique interactions with thepolymer chains. …
Published in International Journal of Polymer Science and Engineering Read article
-
Organic Compound 5-(4-methoxybenzyl)-N-phenyl-1,3,4-thiadiazol-2-amine and NiS filler used to Mitigation the Corrosion of Mild steel and in Marine Atmosphere
Abstract: The concentration of chloride ions is higher in marine atmosphere. The bulk amount of mild steel uses in sea weather for different works. This metal is very sensitive in chloride ions. It produces hostile environment for mild steel. Chloride ions develop corrosion cell on the surface of mild steel and it changes their external and internal morphology as well as physical, chemical and mechanical properties. Mild steel exhibits corrosion reaction …
Published in International Journal of Metallurgy and Alloys · Vol. 5, Issue 2, 2019 · pp. 56–64 Read article
-
Improvement of mechanical properties of recycled polyethylene with utilization of bio-filler
Abstract: Nowadays, the consumption of plastics all over the world has been tremendously growing, which is culminating into large amount of waste plastic material. It is believed that the management of solid waste is one of the major environmental concerns in the world. Due to limited space on landfills and increasing costs of plastics, utilization of waste plastics has become an attractive alternative for disposal. This research work describes the preparation …
Published in International Journal of Green Chemistry · Vol. 3, Issue 1, 2017 · pp. 18–26 Read article
-
The new method of composite materials production
Abstract: The existing methods for production, for example, polymer composite materials: the pressing (direct, injection, profile), the injection molding (injection, intrusion, centrifugal molding, and autoclaving), the extrusion, the pultrusion, the contact molding, the winding, vacuum molding and pneumatic molding do not permit to reach the main goal of the production of unique composite materials with a basis (matrix) filled by uniformly distributed filler (armoured element), having high strength and rigidity. The …
Published in International Journal of Composite and Constituent Materials · Vol. 5, Issue 2, 2019 · pp. 18–22 Read article
-
The Production Advanced Carbon Nanocomposite Materials by Using the Method of Vibro-turbulization
Abstract: Nanocomposites are materials that contain nano-sized particles in a matrix of a standard material. The addition of nanoparticles to the matrix results in a sharp improvement in the properties of the resulting nanomaterial, including mechanical strength, toughness, and electrical or thermal conductivity. Existing methods for the synthesis of nanocomposites, consisting in the laser decomposition of an aerosol of a ferrocene solution in toluene, as a result of which a nanocomposite …
Published in International Journal of Applied Nanotechnology · Vol. 6, Issue 2, 2020 · pp. 10–14 Read article
-
Development of Epoxy Based Hybrid Composite Reinforced with Jute and Glass-fiber and Effect of Silicon Carbide additive on it’s Mechanical Properties
Abstract: In this project, an effort is made to compare the improvement of the matrix material properties because of the presence of the fillers and additives. Initially, hand lay-up process was carried out in a mold of known dimensions to layup jute fibers of varying weight percentages in the epoxy matrix. Another composite with glass fibers of similar weight percentages to that of jute were laid up in epoxy matrix in …
Published in International Journal of Composite and Constituent Materials · Vol. 4, Issue 2, 2018 · pp. 8–12 Read article
-
Experimental verification of strength of glass fiber reinforced polymer matrix composites
Abstract: An experimental investigation has been carried out to develop a new PMC (Polymer Matrix Composite) using commercially available Epoxy and Polyurethane resin systems. These resin systems would be reinforced with glass fibers, filler materials and aluminium foils. The laminates have been prepared by using the hand lay-up technique for eight layers and the mechanical tests such as tensile and compression test have been conducted for the PMC. This work has …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 3, Issue 1, 2017 · pp. 43–51 Read article
-
Walnut Shells’ Potential Use as Biofillers in Natural Rubber Composites
Abstract: The study assessed the potential of walnut shells as a filler in natural rubber composites. Walnut shells were finely ground, sieved through a 75 μm mesh, and incorporated into natural rubber at different filler loadings: unfilled, 20 parts per hundred rubber (phr), 30 phr, 40 phr, and 50 phr. The physicochemical properties of the walnut shell powder were analyzed, yielding results of 5.30 for pH, 10.10% for moisture content, 2.50% …
Published in International Journal of Polymer Science and Engineering · Vol. 10, Issue 2, 2024 · pp. 1–5 Read article
-
A Review on Polybutadiene Rubber Composites
Abstract: Rubber composites are crucial materials that obtained by the combination of two or more components i.e. rubber and filler, comprising with different fundamental properties. The composites are lighter yet stronger materials in nature with intermediate characteristics of both the initial ingredients. Polybutadiene rubber (PBR) is one of the highly produced global synthetic rubber having significant industrial applications. PBR composites showed improved physical, mechanical and thermal properties, with greater strength, resistance …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 2, 2020 · pp. 1–19 Read article
-
Maximizing Void Properties from Optimized Local Pozzolans in Wearing Course of Bituminous Concrete Mixtures
Abstract: Failure of asphalt pavement has influenced research into better ways to optimize local pozzolans seenas waste and reduce cost of importation of admixtures. Waste Shell Ashes are checked as localassembled by incorporating them in asphalt concrete mix design. Different research has shown thatsome agricultural waste/by-products can be admitted as mineral fillers in hot-mix asphalt concrete toobtain certain desirable properties. It is on this basis that this research attempts to interrogate …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 7, Issue 2, 2021 · pp. 47–54 Read article
-
Study the Corrosive Effect of Greenhouse Gases on Metallic and Non-metallic Materials
Abstract: Carbon dioxide is a major corrosive pollutant for building materials. It enters inside materials by diffusion or osmosis process and in presence of moisture it produces H2CO3 which decrease the pH value and accelerates chemical and electrochemical reaction with building materials. The carbonation reaction produces deterioration inside and outside of building materials. It produces corrosion reaction with metallic bar and disbanding with concrete. CO2 reacts with Ca (OH)2 and Mg(OH)2 …
Published in International Journal of Metallurgy and Alloys · Vol. 7, Issue 2, 2021 · pp. 17–28 Read article
-
The Potential Application of Walnut Shells as Biofillers for Natural Rubber Composites
Abstract: It was evaluated whether walnut shells should be used as filler in composites made of natural rubber. Samples of walnut shells were ground to fine powders, sieved through a 75 μm mesh, and were used in compounding natural rubber using varying filler loading of unfilled, 20 hpr, 30 hpr, 40 hpr, and 50 hpr. The physicochemical analysis results of the walnut shell powder were 5.30, 10.10%, 2.50%, 43.70%, 49.70 mg/g, …
Published in International Journal of Composite Materials and Matrices · Vol. 8, Issue 2, 2022 · pp. 30–34 Read article
-
Functional Rubber Particles and Their Applications- A Review
Abstract: Functional rubber powders (FRPs) are emerging as a potential class of materials derived primarily from end-of-life tires (ELTs) and other rubber scraps through mechanical, cryogenic, or de-vulcanization methods. These powders act as high-performance additives or reinforcing fillers in various engineering applications due to their low cost, improved surface properties, customizable particle sizes, and ability to undergo further chemical reactions. This review provides an overview of the production technologies, focusing on …
Published in International Journal of Chemical Separation Technology · Vol. 11, Issue 2, 2025 · pp. 8–16 Read article
-
Mesh to Shrink in Nano Fabricated Compose
Abstract: This article is study about shrink of polymer originated composes. Aim has been inclusive from nano- based fillers on hybridized consequence from polymeric effects. Otherwise, descriptive issues have ever arose to link accession to repair dental simulated perversions. Nanotechnology in material formulation has been production of functional structures in range of 0.1 to 100 nm. Advantages of these composites have inherent shrinkage of cure mode in accordance to monomers said …
Published in International Journal of Applied Nanotechnology · Vol. 7, Issue 2, 2021 · pp. 1–12 Read article
-
Experimental evaluation of dc Conductivity of Rice Husk Reinforced Polypropylene Composites with addition of cenosphere
Abstract: Insulating materials are used in electrical power circuits to prevent leakages of current. Main objective of this study is to evaluate the dc conductivity of rice husk filled polypropylene composites with and without cenosphere. The conductivity at room temperature was found to decreases from 2.64e-13 to 9.371e-14 S cm-1 with the addition of cenosphere. Dense packing of the material, collapse of pores and decreases in air gap between the rice …
Published in International Journal of Composite Materials and Matrices · Vol. 1, Issue 1, 2015 · pp. 20–27 Read article
-
Studies on Effect of Organoclay and Melamine Powder on Flexible Polyurethane Foam for Aerospace Applications
Abstract: Flexible polyurethane foam (PU) is a suitable candidate for various aerospace applications like acoustic insulation due to its high flexibility, ease of processing, etc. But one of the major disadvantages of this foam is low flammability resistance. The aim of this study is to improve the flame resistant properties of flexible PU foam through incorporation of additives. Flexible polyurethane foams were synthesized through one shot process with organically modified nanoclay …
Published in International Journal of Polymer Science and Engineering · Vol. 7, Issue 2, 2021 · pp. 15–26 Read article