Search
405 articles for “mechanical properties”
-
An Analysis of the Mechanical Properties of Polyethylene Composites Reinforced with Short Vetiver Fibers
Abstract: Synthetic fibers (such as carbon, glass, ceramic fibers, etc.) are a cause of environmental concern, so natural fibers (such as vetiver, calotropis gigantea, flax, hemp, jute, etc.) are extensively used. In this study, the compression molding process was used to improve low-density polyethylene (LDPE) matrix composites reinforced with vetiver fiber (VF). Experiments were conducted by varying VF length, VF content, and fiber treatment time. The composites' static mechanical characteristics, including …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 1, 2025 · pp. 1–13 Read article
-
Correlation between full width at half maximum (FWHM) of XRD peak with mechanical properties
Abstract: Full width at half maximum (FWHM) of XRD profiles characterizes different mechanical properties. However, there is no literature available that discusses about the correlation between the FWHM of XRD peaks with mechanical properties (ultimate tensile strength, yield strength, strain hardening coefficient and micro-hardness) upon plastic deformation. Martensitic stainless steel (type 410) and Ferritic stainless steel (type 430) samples were plastically deformed under different strain rate using tensile testing machine. Variation …
Published in International Journal of Metallurgy and Alloys · Vol. 1, Issue 1, 2015 · pp. 15–23 Read article
-
Mercerization and Mechanical Properties of Natural Fibre Reinforced Composite: A Comprehensive Review
Abstract: Growing public concern about environmental issues has prompted the production of renewable, economical, and ecologically friendly materials. Thus a shift from synthetic fiber reinforced composites to natural fiber reinforced composites can be seen. Since Fibre reinforcement is deciding factors in the Structural properties of any engineered composite. But poor interfacial adhesion of fibre matrix obstruct it's potential while using in structural applications. Different studies suggested that the surface modification techniques …
Published in International Journal of Composite Materials and Matrices · Vol. 8, Issue 1, 2022 · pp. 1–8 Read article
-
ENHANCEMENT OF MECHANICAL PROPERTIES OF ALLOY 61S BY REINFORCING NANO COMPOSITES
Abstract: During recent decades, a lot of interest had shown in the materials production with nano sized grains. Especially, the aluminum alloys and its composites are widely used for demanding structural applications due to combination of corrosion resistance, formability, weldability and, mechanical properties. The demand for toughness, higher strength and, strength and weight ratio of aluminum alloys for the structural application is ever growing owing to the increasing importance of achieving …
Published in International Journal of Metallurgy and Alloys · Vol. 5, Issue 2, 2019 · pp. 18–36 Read article
-
MODELLING OF SAW PARAMETERS AND ITS MECHANICAL PROPERTIES FOR JOINING STRUCTURAL STEELS
Abstract: Ethiopia nearly 85 per cent of people is morality depends on agriculture; the government of Ethiopia emphasis on Farm Mechanization for bringing the improvement in crop production using modern equipment and tools. However, the Modern equipment development needs improved machineries for fabrication. Moreover, the metal joining technology; like Submerged Arc Welding (SAW) available is very advance and made welding of thicker plats and welded structures. Therefore, while using this modern …
Published in International Journal of Polymer Science and Engineering · Vol. 4, Issue 2, 2018 · pp. 34–43 Read article
-
Study of Mechanical Properties of Aluminum Nanocomposites using Auto Ignition Technique
Abstract: Al2O3 - high ZrO2 nanocomposite was synthesized by auto-ignition technique using metal nitrate and citric acid with a ratio of citrate: nitrate equal to 1:1.5. The precursor zirconium oxynitrite was derived from precipitation of zirconium oxycloride followed by dissolution of gel in nitric acid. The thermal decomposition behaviour of the gel was studied in order to study the decomposition behaviour and to determine the crystallization temperature. The effect of calcination …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 3, Issue 2, 2017 · pp. 36–42 Read article
-
Thermo-Mechanical Properties of Banana and Jute Fiber Reinforced Polypropylene Composites
Abstract: Abstract Present research aims at finding out better fiber reinforcement for low cost and eco-friendly polymer matrix composite. Polypropylene was chosen as a matrix, while jute and banana fiber were chosen as reinforcement. Composites were prepared by using a hot press machine. Fiber loading was varied at 0, 4 and 8 volume%. Both raw jute and banana fiber was chemically treated with 5 wt% sodium carbonate and composites were also …
Published in International Journal of Composite Materials and Matrices · Vol. 5, Issue 2, 2019 · pp. 37–47 Read article
-
A Study on Mechanical Properties and Fracture Behavior of Chopped Fiber Reinforced Self-Compacting Concrete
Abstract: The development of self-compacting concrete (SCC) is innovatory landmark in the history of construction industry resulting in predominant usage of SCC worldwide nowadays. It has many advantages over normal concrete in terms of enhancement in productivity, reduction in labor and overall cost, excellent finished product with excellent mechanical response and durability. Further, incorporation of fibers enhances its properties specially related to post crack behavior of SCC. Hence, the aim of …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 1, 2017 · pp. 90–122 Read article
-
Virgin-Recycled Thermoplastic Matrix Systems as Engineered Composite Materials: A Compositional Framework for Mechanical Property Retention in Secondary Polymer Supply Chains
Abstract: Virgin-to-recycled thermoplastic resin blends, while conventionally treated as simple two- component mixtures in secondary polymer supply chains, exhibit compositional and morphological characteristics that are more accurately described using the framework of engineered composite matrix systems. This paper presents a compositional framework for understanding and predicting mechanical property retention in virgin-recycled polypropylene (PP) and high-density polyethylene (HDPE) matrix systems, developed through more than twenty years of commercial secondary polymer distribution practice …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 2, 2026 Read article
-
Mechanical properties of Poly vinyl alcohol and Nitrocellulose blends.
Abstract: Mechanical properties of polyvinyl alcohol and nitrocellulose blends has been determined successfully via tensile strength, Young’s modulus, percentage elongation and impact strength. The blends of the respective polymers are in the ratio PVA:NC (90:10,80:20,60:40,50:0,40:60,10:90). There are good results from different blend ratios which include tensile strength PVA: NC 90:10 (16.98MPa) Young’s modulus 60:40 (0.71MPa). The highest percentage elongation was observed for 80:20 at 160.09%. The most elastic blend ration was …
Published in International Journal of Analytical and Applied Chemistry · Vol. 6, Issue 1, 2020 · pp. 54–59 Read article
-
Effect of Addition of Phosphates on Thermal, Physical and Mechanical Properties of Phenolic and Amino Bonded Wood Composite
Abstract: Properties of flame retardant molecule board made by treating the molecule (crowded deltoids) with mono ammonium hosphate/diammonium phosphate (MAP/DAP) creation were examined. Two convergences of (0, 1, and 2%) of flame retardants ere joined to the particles on broiler dry weight of the particles. Melamine Urea Formaldehyde tar (MUF) and phenol formaldehyde pitch (PF) were utilized to produce the exploratory boards. The fire retardancy and warm strength of the composites …
Published in International Journal of Composite Materials and Matrices · Vol. 2, Issue 1, 2016 · pp. 8–14 Read article
-
A Study on Effect of Polarity on Mechanical Properties in Saw Process
Abstract: Welding is one of the most common fabrication techniques which is extensively used to obtain desirable quality welds for intended application in various structural components. The invariable importance of welding processes has been very well realized since long times ago, therefore till nowadays there is hardly any sector of human life which has not been benefited from applications of welding. Apart of quality of flux and welding parameters, welding processes …
Published in International Journal of Manufacturing and Materials Processing · Vol. 7, Issue 1, 2021 · pp. 1–6 Read article
-
Mechanical properties of Al-Si17Cu3.5Mg0.8 alloy fabricated by stir casting with UV and new CRSS casting process with and without T6 condition
Abstract: Aluminum-Silicon metal matrix composites are the popular materials in the vast majority of the car and modern industries on account of their low weight, high mechanical properties, and incredible wear opposition properties. In the present study, Al-Si17Cu3.5Mg0.8 alloy is fabricated by two casting processes such as stir casting with ultrasonic vibrations (RSC) and merged-rheo-stir-squeeze (CRSS) casting with and without heat treated (T6) condition. Microstructural and material characterization was explored by …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 1, 2020 · pp. 15–24 Read article
-
INVESTIGATIONAL STUDIES ON MECHANICAL PROPERTIES FOR FRPS COMPOSITES
Abstract: The fibre reinforced composite materials consists of fibres of significant stiffness and strength embedded in a matrix with distinct boundaries between them and these materials had better mechanical properties when compared to normal metals which are thought as better substitutes to metals and add strength and reduces weight of a given system.The strength of FRPSS varies basing on its constituents and composition of constituents. In marine field where high strength …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 1, 2020 · pp. 1–6 Read article
-
Analyzing the Effect of Rice Husk Ash & Quartz Powder on Mechanical Properties of Polypropylene Fiber Based Concrete Using Regression Analysis
Abstract: Several works were identified with sustainable development have uplifted the improvement of composite binders incorporating Portland cement, industrial, agricultural by- products and partial substitutions to aggregates. One of the most adverse effects of using cement is the emission of CO2 into atmosphere during production and it can be reduced with the effective use of cementitious materials. Several efforts were attempted to make use of supplementary cementitious materials to enhance the …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 2, 2021 · pp. 51–57 Read article
-
A Review of Examining the Mechanical Properties of Natural Fiber Reinforced Polymer Composites for the Automotive Sector
Abstract: The need for lightweight, sustainable materials has increased due to the growing global population, environmental issues, and the fast growth of the automotive sector. Because of their excellent mechanical and physical qualities as well as their environmentally beneficial character, natural fiber-reinforced composites have become a viable option. Due to their ability to blend strength with lightweight properties, these composites are gaining increasing popularity across various industries, including aerospace, automotive, sports, …
Published in International Journal of Composite and Constituent Materials · Vol. 11, Issue 1, 2025 · pp. 1–7 Read article
-
Nanocomposites – Enhancing Mechanical Properties Through Nanoengineering
Abstract: Nanocomposites represent a groundbreaking development in material science, leveraging the unique properties of nanoscale reinforcements to revolutionize the performance of traditional composite materials. By integrating nanomaterials, such as carbon nanotubes, graphene, nanoclays, and metal nanoparticles into a polymer, ceramic, or metal matrix, nanocomposites exhibit significantly enhanced mechanical properties, including improved strength, toughness, and durability. These improvements arise from superior interfacial interactions, efficient load transfer mechanisms, and increased resistance to mechanical …
Published in International Journal of Composite and Constituent Materials · Vol. 11, Issue 1, 2025 · pp. 46–52 Read article
-
Experimental Investigation To Study the Effect of Heat Treatment on Mechanical Properties and Microstructure of Duplex Stainless Steel
Abstract: The broad aim of this paper is to study the enhancement in mechanical properties of duplex steel by thermomechanical processing. Solution annealing followed by water quenching, hot rolling to 10% and 30%, cryo-rolling to 80% and 90% and ageing at 600°C and 1000°C for 5 hrs were the treatments given. The cryo-rolled samples were used for impact testing and rest for tensile testing. Microstructural analysis was done after the various …
Published in International Journal of Mechanics and Design · Vol. 2, Issue 2, 2016 · pp. 32–42 Read article
-
To Study the Effects on Mechanical Properties ofConcrete by Partial Replacement of Sand with MetallicSwarf
Abstract: Abstract The utilization of metallic swarf in concrete manufacturing is increasing in importance due to its environmental and economic benefits. However, the mechanical qualities of such concrete frequently appear inferior to regular concrete. To improve the mechanical characteristics of standard concrete, numerous additives have been researched, but the utilization of metallic swarf remains a mystery. This research investigates the recycling of waste metallic swarf produced in the automobile industry and …
Published in International Journal of Mechanics and Design · Vol. 11, Issue 1, 2025 · pp. 54–60 Read article
-
Influence of Different Quenching Media on the Mechanical Properties of Mild Steel – A Case Study of Coconut Oil, Mineral Oil, Jatropha Oil, and Water
Abstract: This study elucidates how local cooling agents, such as coconut oil and jatropha oil, influence the mechanical characteristics of heat-treated mild steel. Tensile testing, Brinell hardness testing, and microstructural analysis were conducted on both heat-treated and untreated samples. The results show observable differences in the heat-treated materials’ mechanical characteristics. Specifically, the yield strength increased across all quenched media, while the ultimate tensile strength decreased for samples cooled with coconut oil …
Published in International Journal of Metallurgy and Alloys · Vol. 10, Issue 2, 2024 · pp. 1–8 Read article