Search
10 articles for “plastic strain”
-
Analysis of Elastic and Elasto-Plastic Behaviour of A588 Structural Steel Beam
Abstract: In the present work, an elastic and elasto-plastic behaviour of ASTM A588 structural beam of I-section has been carried out. The cantilever beam model of I-cross section has been created in the finite element simulation software ABAQUS. In the elastic behaviour study, the model has been simulated in the elastic region. After that, the model has been extended to an elasto- plastic analysis by incorporating the plastic strain in the …
Published in International Journal of Mechanics and Design · Vol. 6, Issue 2, 2020 · pp. 1–16 Read article
-
Advanced Magnesium-Based Metallic GlassComposites for Biomedical Implant Applications: AMachine-Learning-Informed Approach
Abstract: Magnesium-based bulk metallic glasses (Mg-BMGs) combine strength, low density, and tunable degradability. Their amorphous matrix has a small plastic process zone. This zone is only about 4 μm wide. A small process zone keeps most glasses brittle. Adding a second phase is the best fix. This chapter extends Mg-BMGs to true composites. We call these Mg-based bulk metallic glass composites, or Mg- BMGCs. The chapter covers matrix engineering and interfacial …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 2, 2026 · pp. 48–65 Read article
-
A Model for Plastic-Hydrolytic Damage Bioresorbable Polymer Composites
Abstract: This paper explains and assesses a recently developed constitutive model for elastic-damage that may sustain plastic-hydrolytic damage. When a metallic material is subjected to plastic strain, voids and microcracks in the metal matrix start to form, develop, and merge. This is what causes ductilitydegradation in metals. Only a few of the many models that have been presented to depict ductile failure have done a thorough analysis of the entire damage …
Published in International Journal of Composite Materials and Matrices · Vol. 8, Issue 1, 2022 · pp. 23–27 Read article
-
Correlation between full width at half maximum (FWHM) of XRD peak with mechanical properties
Abstract: Full width at half maximum (FWHM) of XRD profiles characterizes different mechanical properties. However, there is no literature available that discusses about the correlation between the FWHM of XRD peaks with mechanical properties (ultimate tensile strength, yield strength, strain hardening coefficient and micro-hardness) upon plastic deformation. Martensitic stainless steel (type 410) and Ferritic stainless steel (type 430) samples were plastically deformed under different strain rate using tensile testing machine. Variation …
Published in International Journal of Metallurgy and Alloys · Vol. 1, Issue 1, 2015 · pp. 15–23 Read article
-
DETAILED STUDY ON THE PROPERTIES OF PLASTIC CONCRETE CUTOFF WALL MATERIALS MIXED WITH WATERPROOFING ADMIXTURES
Abstract: This study presents the results of a comprehensive experimental work performed to characterize the mechanical and hydraulic properties of plastic concrete materials added with water-resisting and crystalline admixture as Permeability Reducing Admixture for Hydrostatic conditions (PRAH). The mechanical properties, deformation, permeability nature, triaxial stress-strain curve, hydration products, phase composition, and pore structure of plastic concrete with various proportions of PRAH were investigated. In addition to that, retarding admixture was used …
Published in International Journal of Concrete Technology · Vol. 9, Issue 1, 2023 · pp. 1–15 Read article
-
Strain Life Approach for the Fatigue Evolution Model of Concrete under Constant Amplitude Bending Fatigue Loading
Abstract: Strain life approach for the fatigue evolution model of concrete under constant amplitude bending fatigue loading plays a very important role in the material properties such as the fatigue strain, fatigue modulus and fatigue damage, presented in this paper by the nonlinear fatigue evolution model, and the hypothesis of recycle-ratio-related fatigue strain amplitude that causes stiffness degradation and inelastic deformation. The fatigue evolution model of concrete under constant amplitude bending …
Published in International Journal of Structural Engineering and Analysis · Vol. 5, Issue 1, 2019 · pp. 35–60 Read article
-
Strain Based Approach to the Fatigue Evolution Modeling of Concrete under Tension-Tension Loading
Abstract: Abstract: Strain based Approach to the Fatigue Evolution Modeling of Concrete under Uniaxial Tension-Tension Loading plays a very important role in the evaluation of the material properties of concrete utilizing strain analysis methods, the nonlinear fatigue strain evolution model is proposed, and the hypothesis of recycle ratio related fatigue strain amplitude causes stiffness degradation and inelastic deformation is briefly described which are the essential material properties of concrete. This paper …
Published in International Journal of Composite Materials and Matrices · Vol. 5, Issue 1, 2019 · pp. 36–56 Read article
-
Effect of Aggregate Shape and Binder on the Rutting Characteristics of Bituminous Mixes
Abstract: Rutting or permanent deformation is the depression in the wheel paths due to accumulation of small amounts of unrecoverable strains under the channelized repeated wheel loads. Shear deformation or lateral plastic flow of the bituminous mix from the wheel tracks also results in rutting. Performance of bituminous mixes is influenced by the constituents of the mix made of aggregates and binder. Among various parameters of these two ingredients, aggregate shape …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 3, Issue 1, 2017 · pp. 1–6 Read article
-
Investigating the Effects of Severe Plastic Deformation on Aluminium Alloy Properties: A Comparative Study
Abstract: Equal channel angular pressing is a metal forming process. It serves as a strengthening treatment through which ductile metals can be processed to refine their grain and subgrain structure. This process improves the mechanical performance of metals, including tensile strength, stress-controlled fatigue strength, and resistance to fatigue crack propagation. Equal channel angular pressing is one of the severe plastic deformation methods employed to produce ultrafine-grained materials. In this method, a …
Published in International Journal of Mechanics and Design · Vol. 12, Issue 1, 2026 · pp. 26–43 Read article
-
Properties of Bentonite Stabilised with Fluorogypsum
Abstract: This paper presents the properties of the bentonite stabilised with fluorogypsum. For this purpose, commercially available bentonite and fluorogypsum were used in this investigation. The fluorogypsum content and the curing period were varied from 0% to 10 % and 0 to 28 days respectively. Compaction tests results reveal that the maximum dry unit weight increases and optimum moisture content decreases with the increase in the fluorogypsum content to the bentonite. …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 6, Issue 1, 2020 · pp. 43–53 Read article