Search
19 articles for “ultimate tensile strength”
-
Mechanical Behavior of AA7075/Glass Fiber Reinforced Polymer Composites
Abstract: This paper reports on the mechanical properties of As-cast and heat-treated AA7075 polymer composites reinforced with glass fibers from 1 to 5 wt%. The polymer composites were fabricated using the Compo casting method, in which short glass fibers were introduced into the vortex created in the molten alloy through an impeller rotated at 500 rpm. The molten mass was thoroughly stirred and poured into permanent molds and squeezed under pressure. …
Published in International Journal of Composite and Constituent Materials · Vol. 6, Issue 2, 2020 · pp. 11–20 Read article
-
Review of Optimization Process Parameters in Welding system
Abstract: This study was based on design of experiment (DOE) using Taguchi method with four welding parameters namely welding current, welding speed, root gap and electrode angle considered for experimentation. An orthogonal array of L9 experimental design was adopted and ultimate tensile strength was investigated for each experimental run. The tensile test was carried out on extracted welded and unwelded specimens using universal testing machine (UTM). Microstructures of the welded specimens …
Published in International Journal of Manufacturing and Materials Processing · Vol. 2, Issue 1, 2016 · pp. 48–54 Read article
-
Characterization of Tensile Properties of Dissimilar Welded Joints of 316 Stainless Steel and HSLA Steel
Abstract: In this research, dissimilar weld joints of 316 stainless steel/HSLA steel were produced using ER316L-16 and E7018 filler metals by varying welding parameters such as current and arc voltage. Heat input and travel speed was computed. The joints were subjected to tensile test and tensile values were determined, computed, recorded and analysed. The heat inputs were compared with the tensile test results. According to the results obtained and analysis carried …
Published in International Journal of Manufacturing and Materials Processing · Vol. 6, Issue 2, 2020 · pp. 1–7 Read article
-
Characterization of AL-2014 TIG Welded Joints
Abstract: Abstract – This experimental study presents a comprehensive investigation into the tensile strength of TIG-welded butt joints made from Al-2014 alloy, a material that find applications in aerospace and structural engineering due to its excellent machinability and high strength to weight ratio. Welding Al-2014 alloy is challenging because it is more prone to hot cracking, oxide layer formation and thermal distortion. Therefore, it is very important to optimize welding parameters …
Published in International Journal of Manufacturing and Materials Processing · Vol. 12, Issue 1, 2026 · pp. 25–31 Read article
-
Correlation between full width at half maximum (FWHM) of XRD peak with mechanical properties
Abstract: Full width at half maximum (FWHM) of XRD profiles characterizes different mechanical properties. However, there is no literature available that discusses about the correlation between the FWHM of XRD peaks with mechanical properties (ultimate tensile strength, yield strength, strain hardening coefficient and micro-hardness) upon plastic deformation. Martensitic stainless steel (type 410) and Ferritic stainless steel (type 430) samples were plastically deformed under different strain rate using tensile testing machine. Variation …
Published in International Journal of Metallurgy and Alloys · Vol. 1, Issue 1, 2015 · pp. 15–23 Read article
-
Mechanical and Microstructure Properties of Al and SiC Reinforced Aluminum-Based Metal Matrix Composite
Abstract: It is becoming increasingly difficult to design new technical materials that are resistant to wear damage and corrosion degradation in severe service circumstances. Unfortunately, even with crucial passive metals, like Al alloys, there is often a compromise between wear and corrosion resistance. Because of the unfavorable galvanic connection between the precipitates and the matrix, precipitates not only harden the material but also accelerate corrosion. This research established that a supersaturated …
Published in International Journal of Metallurgy and Alloys · Vol. 11, Issue 1, 2025 · pp. 26–43 Read article
-
Influence of Different Quenching Media on the Mechanical Properties of Mild Steel – A Case Study of Coconut Oil, Mineral Oil, Jatropha Oil, and Water
Abstract: This study elucidates how local cooling agents, such as coconut oil and jatropha oil, influence the mechanical characteristics of heat-treated mild steel. Tensile testing, Brinell hardness testing, and microstructural analysis were conducted on both heat-treated and untreated samples. The results show observable differences in the heat-treated materials’ mechanical characteristics. Specifically, the yield strength increased across all quenched media, while the ultimate tensile strength decreased for samples cooled with coconut oil …
Published in International Journal of Metallurgy and Alloys · Vol. 10, Issue 2, 2024 · pp. 1–8 Read article
-
Optimization of Process Parameters of GMAW for Penetration, Toughness and Tensile Strength by using Taguchi Method
Abstract: Aluminum and its alloys are having variety of applications in Aircraft, food processing etc. Moreover; the use of Aluminum and its alloys are increasing day by day due to its specific properties, like light weight, high strength, and excellent corrosion resistance. However; the present study is planned to analyze and optimize the aluminum weld joint characteristics like tensile strength, penetration and toughness by using Gas Metal arc welding (GMAW) welding. …
Published in International Journal of Mechanics and Design · Vol. 5, Issue 1, 2019 · pp. 1–9 Read article
-
Experimental Investigation To Study the Effect of Heat Treatment on Mechanical Properties and Microstructure of Duplex Stainless Steel
Abstract: The broad aim of this paper is to study the enhancement in mechanical properties of duplex steel by thermomechanical processing. Solution annealing followed by water quenching, hot rolling to 10% and 30%, cryo-rolling to 80% and 90% and ageing at 600°C and 1000°C for 5 hrs were the treatments given. The cryo-rolled samples were used for impact testing and rest for tensile testing. Microstructural analysis was done after the various …
Published in International Journal of Mechanics and Design · Vol. 2, Issue 2, 2016 · pp. 32–42 Read article
-
Investigating the Effects of Severe Plastic Deformation on Aluminium Alloy Properties: A Comparative Study
Abstract: Equal channel angular pressing is a metal forming process. It serves as a strengthening treatment through which ductile metals can be processed to refine their grain and subgrain structure. This process improves the mechanical performance of metals, including tensile strength, stress-controlled fatigue strength, and resistance to fatigue crack propagation. Equal channel angular pressing is one of the severe plastic deformation methods employed to produce ultrafine-grained materials. In this method, a …
Published in International Journal of Mechanics and Design · Vol. 12, Issue 1, 2026 · pp. 26–43 Read article
-
Tri-Route Orchestration of Sr-Modification, MoldVibration, and T6 Treatment on the Microstructure andPerformance of A356 Alloy
Abstract: This study examines the cascade effects of chemical modification, mechanical mold vibration during solidification, and subsequent T6 heat treatment on the microstructural evolution and multi-property enhancement of A356 Alloy cast via permanent mold casting. Initially Sodium (Na) modifying flux (2– 4 wt%) and Strontium (Sr) elemental modifier (0.01–0.05 wt%) were implemented to refine the morphology of eutectic silicon; Sr addition at an optimal concentration of 0.04 wt.% yielded superior eutectic …
Published in International Journal of Manufacturing and Materials Processing · Vol. 12, Issue 2, 2026 · pp. 13–25 Read article
-
Fabrication, Microstructure and Mechanical Behavior of Aluminum Alloy (LM-13) Reinforced with Nano-ZrO2 Particulate Chilled Nano-Metal Matrix Composites (CNMMCs)
Abstract: In the present research, aluminum alloy (LM13) Metal Matrix Composite (MMC) is prepared by stir casting technique and is reinforced with ZrO2 particulates in the weight percent ranging from 3 wt.% to 12 wt.% in the steps of 3 wt.%. The reinforcement i.e., ZrO2 particle size added varies between 100–200 nm. The resulting CNMMCs are solidified under the influence of copper chill of 25 mm thickness to study the effect …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 6, Issue 2, 2020 · pp. 17–30 Read article
-
Experimental Investigation on Tensile Properties of Al6061-Graphite Particulate Composites
Abstract: This paper presents the experimental work carried out on the tensile behavior of aluminium 6061 (Al 6061) graphite particulate composites. The required specimen are prepared using stir casting method with graphite proportions ranging from 3 to 12 % by weight. The mechanical behavior of Al 6061 graphite particulate composites produced using stir casting method, was investigated by conducting experiments on Universal Testing Machine (UTM). Tensile specimens were utilized for tensile …
Published in International Journal of Composite Materials and Matrices · Vol. 1, Issue 2, 2015 · pp. 1–8 Read article
-
Effect of Pulsed Current Micro Plasma Arc welding parameters on Mechanical properties AISI 304 and AISI 430 dissimilar weld joint
Abstract: In the present work, two dissimilar AISI 304 and AISI 430 sheets of 0.4mm thick welded using Micro Plasma Arc Welding. Welding input parameters like peak current, base current, pulse rate and pulse width are considered and output responses like fusion zone grain size, hardness and ultimate tensile strength of the welded joint are considered. 31 experiments are performed as per Central Composite Design (CCD) design matrix of Response Surface …
Published in International Journal of Manufacturing and Materials Processing · Vol. 5, Issue 1, 2019 · pp. 1–26 Read article
-
Application of Response Surface Method in Studying the Properties of Micro-plasma Arc Welded AISI 904L Super Austenitic Steel
Abstract: Super austenitic steels play a major role in fabrication of corrosion resistance components which are subjected to severe corrosion. In the present work, super austenitic steel AISI 904L of 0.4 mm thickness is butt welded using Micro Plasma Arc Welding. Welding input parameters like peak current, base current, pulse rate and pulse width are considered and output responses like fusion zone grain size, hardness and ultimate tensile strength of the …
Published in International Journal of Manufacturing and Materials Processing · Vol. 5, Issue 2, 2019 · pp. 1–17 Read article
-
Study on the Effects of Polypropylene Fiber in Concrete Paver Blocks
Abstract: Road transportation is the lifeline of the nation and its development is a crucial concern. The traditional bituminous pavement needs the continuous maintenance and rehabilitation operations, which ultimately leads to the scope for cement concrete pavements. This paper highlights the effects of polypropylene fibers in concrete paver blocks, which is a recent advancement in the field of reinforced concrete pavement design. Concrete paver blocks prepared for M30 grade and the …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 2, 2017 · pp. 32–38 Read article
-
Revolutionizing Concrete Strength: The Role of Carbon Nanotube Reinforcements
Abstract: Abstract The integration of carbon nanotubes (CNTs) into concrete represents a revolutionary advancement inconstruction material technology. Carbon nanotubes, known for their exceptional mechanical,electrical, and thermal properties, offer transformative potential for enhancing the strength, durability,and functionality of traditional concrete. This study explores the role of CNTs as a nano-reinforcementmaterial, focusing on their impact on compressive strength, tensile capacity, and resistance to crackingand environmental degradation. By incorporating CNTs, concrete can achieve unprecedentedmechanical …
Published in International Journal of Structural Engineering and Analysis · Vol. 11, Issue 1, 2025 · pp. 27–31 Read article
-
Experimental Study on Partially Replacement of Fine Aggregate & Coarse aggregate by Waste Marble with addition of S-Fiber
Abstract: Today’s world is a concrete jungle. With the ever increasing population of the world, in general and the developing countries there is the tremendous pressure on the Civil Engineer to develop a cost effective as well as ecofriendly structure to fulfill the need of the human being. Concrete is a heterogeneous mixture of binding material (cement or lime), coarse aggregates, fine aggregates (sand) and water. Fine and coarse aggregates are …
Published in International Journal of Concrete Technology · Vol. 5, Issue 2, 2019 · pp. 1–9 Read article
-
Experimental Investigation on Shear & Flexural Behavior of GFRP-Reinforced Concrete Beam
Abstract: Reinforced concrete (RC) beams are among the most commonly used structural elements in civil engineering structures. However, the long-term durability of conventional steel reinforcement is often affected by corrosion when exposed to aggressive environmental conditions, which can significantly reduce the service life and structural performance of concrete members. In recent years, Glass Fiber Reinforced Polymer (GFRP) bars have emerged as a promising alternative reinforcement material due to their high tensile …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 12, Issue 2, 2026 Read article