All articles
120 articles
-
Influence of Recycled Aggregate and Steel Fiber on the Compressive Strength of Concrete: A Comparative Study of NAC and RAC Mixes
Abstract: Abstract This study evaluates the impact of varying proportions of recycled concrete aggregate (RCA) and steel fiber content on the compressive strength of concrete mixes. Five concrete mixes were prepared with different percentages of RCA (0%, 25%, 50%, 75%, and 100%), using a constant water-to-cement ratio (w/c) of 0.55. Additionally, each mix included variations with 1% and 2% steel fiber by volume, corresponding to 78.5 kg/m³ and 157 kg/m³, respectively. …
Published in International Journal of Concrete Technology · Vol. 10, Issue 2, 2024 · pp. 11–16 Read article
-
Utilizing Bakelite Waste as Partial Replacement for Coarse Aggregate in Concrete: A Sustainable Approach
Abstract: Abstract This research study investigates the innovative use of Bakelite waste as a partial substitute for coarse aggregate in concrete, focusing on its effects on various mechanical properties and overall performance of the concrete mix. With the growing concern over waste management and environmental sustainability, the incorporation of non-biodegradable materials, such as Bakelite, into construction practices offers a dual benefit: reducing the volume of waste destined for landfills while simultaneously …
Published in International Journal of Concrete Technology · Vol. 10, Issue 2, 2024 · pp. 23–28 Read article
-
Performance Analysis of High-Volume Fly Ash and Recycled Aggregate in M50 Concrete: Workability and Compressive Strength
Abstract: Abstract This study evaluates the impact of recycled aggregate (RA) and high-volume fly ash (HVFA) on the workability and compressive strength of M50 grade concrete. Slump tests were conducted for various water-cement ratios, using a mix ratio of 1:0.69:2.29 and a high-range water reducer. The compressive strength of concrete mixtures incorporating varying percentages of RA and FA was measured at 7, 28, and 90 days. Results indicate that replacing natural …
Published in International Journal of Concrete Technology · Vol. 10, Issue 2, 2024 · pp. 25–32 Read article
-
Utilization of Waste Groundnut Shell Ash in Zero Cement Concrete
Abstract: Currently, geopolymer concrete serves as an excellent alternative to traditional plain cementconcrete, as it is produced without using ordinary Portland cement. Different source materials suchas fly ash, rice husk ash, metakaolin, red mud etc. are preferred to act as the main source forgeopolymer production. In this work, a new innovative waste material such as groundnut ash isutilized as the source material for the manufacture of geopolymer concrete by considering thestrength, …
Published in International Journal of Concrete Technology · Vol. 10, Issue 1, 2024 · pp. 9–17 Read article
-
Structural Behavior of Fiber Reinforced Concrete
Abstract: It’s a structural behavior research was done on normal concrete because it possesses low tensilestrength shows cracking. The addition of fiber can enhance the compressive and tensile properties ofconcrete. An experimental study was conducted to evaluate the compressive and tensile strength offiber-reinforced concrete, confirming the improvements in these mechanical properties. The variousaspects covered are compression test, split tensile strength, Effects of fibers on concrete. The study isdone on the comparison …
Published in International Journal of Concrete Technology · Vol. 10, Issue 1, 2024 · pp. 18–24 Read article
-
Impact of Silica Fume on High-Strength Concrete
Abstract: For many decades, concrete has been the primary material used in construction because of itsreliability under normal conditions. However, certain applications necessitate concrete withexceptionally high compressive strength and durability, particularly in aggressive environments.Consequently, achieving compressive strengths in the range of 60–140 MPa is critical for thesedemanding situations. Silica fume, a by-product of silicon and ferrosilicon smelting processes, hasgained recognition as an effective cementitious material for enhancing concrete properties. Thisdissertation investigates …
Published in International Journal of Concrete Technology · Vol. 10, Issue 1, 2024 · pp. 25–31 Read article
-
Analyzing Strength Properties of Self-Compacting Concrete at Elevated Temperatures
Abstract: This study investigates the influence of fly ash substitution for Ordinary Portland Cement (OPC) on the compressive and splitting tensile strengths of Self-Compacting Concrete (SCC) mixes. The findings reveal that while early age strength may decrease with fly ash substitution, strategic material selection, such as incorporating foundry sand, mitigates this decline. Satisfactory fresh properties were achieved across SCC mixes labeled SCC1-SCC4, with compressive strengths ranging from 30.49 to 19.19 MPa …
Published in International Journal of Concrete Technology · Vol. 10, Issue 1, 2024 Read article
-
Optimizing Concrete Properties with Partial Replacement of River Sand by Used Foundry Sand
Abstract: In response to the scarcity and rising costs of natural river sand, researchers are exploring alternatives like Used Foundry Sand (UFS) to promote sustainable construction practices. This study investigates the partial replacement of river sand with UFS, testing replacement levels from 0% to 25% by weight. Assessing fresh concrete properties and mechanical characteristics, including compressive strength, splitting tensile strength, and flexural strength, the research focuses on M20 and M30 concrete …
Published in International Journal of Concrete Technology · Vol. 10, Issue 1, 2024 Read article
-
A Review on Waste Bakelite as Replacement Partially Over Coarse Aggregate in Concrete Mix
Abstract: Various components in India are made up of Bakelite. Saffron Global Dumping of waste Bakelite through landfill is not allowed due to it effect on soil mass and open burning is not allow because of the emission of harmful gases which cause air pollution. A large space of storehouse requires to store large amount of area for keeping waste Bakelite which becomes management problem of waste. Despite managing waste Bakelite …
Published in International Journal of Concrete Technology · Vol. 9, Issue 2, 2023 · pp. 8–13 Read article
-
Compressive Strength and Chloride penetration on Semi-Lightweight Concrete Made Up of Artificial Aggregates
Abstract: This paper deals with the properties of semi-Light weight concrete prepared by using Light weight wood ash pellets as coarse aggregates. It can be prepared by varying the cement content from 300 to 450 kg/m3. Optimum design mix can be finalised by studying the engineering properties such as compressive strength, split tensile strength, young’s modulus and rapid chloride penetration test. Various trial mixes have been attempted in the laboratory by …
Published in International Journal of Concrete Technology · Vol. 9, Issue 2, 2023 · pp. 14–25 Read article
-
Optimizing Aggregate Gradation for Enhancing Strength Properties of Pervious Concrete
Abstract: Pervious concrete possesses high permeability enabling environmental applications like stormwater recharging. However, lower strength limits widespread infrastructure adoption necessitating enhancements. This study focuses on optimizing aggregate proportions for improving compressive and flexural strength. Mixes were developed with cement variations from 200-500 kg/m3 with fine to coarse aggregates ratios systematically altered. Strengths were measured as per ASTM C39 and ASTM C78. Results showed reduced water-cement ratio and balanced aggregate blends improved …
Published in International Journal of Concrete Technology · Vol. 9, Issue 2, 2023 · pp. 41–49 Read article
-
Modeling 28 Days’ Curing Compressive Strength of Concrete Partially Replaced with Palm Kernel Shell as Aggregate Influenced by Porosity
Abstract: Twenty-eight days of curing to determine compressive strength of concrete were carried out throughthe application of modeling and simulation. The development of concrete compressive strength wascarried out by integrating palm kernel shell (PKS) as partial replacement for aggregate. Studies weremonitored to determine its rates of strength development by partially replacing PKS at differentpercentage of 5%, 10%, 15%, 20%, and 25% to determine the optimum compressive strength withinthe applied percentage of …
Published in International Journal of Concrete Technology · Vol. 9, Issue 2, 2023 · pp. 26–40 Read article
-
Experimental Investigation of Concrete Properties for Strength and Durability with Partial Replacement of Mixture of Nano-Silica
Abstract: This study explores the effects of partial cement replacement with nano-silica on theproperties of concrete, focusing on both strength and durability aspects. Compressive strengthtests were conducted at two key ages, 7 days and 28 days, to evaluate the concrete's performanceunder various conditions. The nano-silica was introduced into the concrete mix at three differentpercentages: 0.3%, 0.6%, and 1% by weight of the cement content. Our experimental findingsindicated a remarkable enhancement in …
Published in International Journal of Concrete Technology · Vol. 9, Issue 2, 2023 · pp. 1–7 Read article
-
Exploring the Integration of Recycled Waste Materials in Concrete: A Comprehensive Overview
Abstract: The utilization of recycled materials from construction sites has experienced a notable increase in recent times, driven by the principle of efficient resource usage established by the International Council of Building in 1994. Recycled materials, including recycled concrete aggregate or brick aggregate sourced from construction and demolition waste, waste glass from municipal waste or recycled sources, and gypsum from gypsum boards, are being increasingly employed as substitutes for primary raw …
Published in International Journal of Concrete Technology · Vol. 9, Issue 1, 2023 · pp. 26–34 Read article
-
Application of Fly Ash and Lime as Partial Replacement of Cement in Concrete
Abstract: Concrete as a construction material plays a significant role in infrastructures development in the world. The main constituents of concrete are cement, fine aggregate, coarse aggregate, and water. Production of cement has been emitting a huge amount of carbon dioxide in the atmosphere. Hence causing environmental pollution. Amount of fly ash generation has been increasing day by day which has also been damaging the environment in the form air, water …
Published in International Journal of Concrete Technology · Vol. 9, Issue 1, 2023 · pp. 41–45 Read article
-
Assessment of Chloride Content in Plaster in Residential Buildings
Abstract: This study investigated the impact of chloride on building as per the age. Concrete samples were collected from buildings of different ages to measure chloride concentration. Findings revealed that chloride content increased with building age, potentially leading to decreased strength and damage. The research identified a significant concern of chloride-induced corrosion in older buildings, as chloride concentration increased with building age. To enhance the durability and safety of aging structures, …
Published in International Journal of Concrete Technology · Vol. 9, Issue 1, 2023 · pp. 35–40 Read article
-
Experimental Investigation on the Properties of Concrete Replacing Waste Plastic as Aggregates for Solving Waste Management Problem
Abstract: Solid waste management is one of the growing problems of every country. As part of this ongoing program to consider the growing waste management, pollution problem, and prevention framework in India, the Ministry of Environment has suggested various approaches and ways through which we can either recycle or use the most polluting materials like plastic. The present study covers one of the ways through which to recycle one of the …
Published in International Journal of Concrete Technology · Vol. 9, Issue 1, 2023 · pp. 17–25 Read article
-
DETAILED STUDY ON THE PROPERTIES OF PLASTIC CONCRETE CUTOFF WALL MATERIALS MIXED WITH WATERPROOFING ADMIXTURES
Abstract: This study presents the results of a comprehensive experimental work performed to characterize the mechanical and hydraulic properties of plastic concrete materials added with water-resisting and crystalline admixture as Permeability Reducing Admixture for Hydrostatic conditions (PRAH). The mechanical properties, deformation, permeability nature, triaxial stress-strain curve, hydration products, phase composition, and pore structure of plastic concrete with various proportions of PRAH were investigated. In addition to that, retarding admixture was used …
Published in International Journal of Concrete Technology · Vol. 9, Issue 1, 2023 · pp. 1–15 Read article
-
Experimental Study on Behavior of various FRP on strength properties of concrete
Abstract: Fibre sheeting is an effective way to repair structures that have become essentially fragile greater than their living expectancy. A lot of research is currently being done on the use of fibre sheets and overlays all around the world. In comparison to traditional repair frameworks and materials, FRP frames are a more cost-effective option. The purpose of this study is to experimentally investigate the behavior of GFRP, CFRP, and BASALT …
Published in International Journal of Concrete Technology · Vol. 8, Issue 2, 2022 · pp. 9–13 Read article
-
Potential Use of Waste Marble Fine in Concrete
Abstract: In India waste is producing in large amount from cutting and dressing industries of stone. This waste creates the problem for surrounding area as well as human being. Keeping such as issues in mind an experimental work was conducted on concrete by using marble waste (MW). Marble waste (MW) 5%, 10%, 15%, 20% and 25% was added as filler. To examine the fresh properties of concrete slump test of workability …
Published in International Journal of Concrete Technology · Vol. 8, Issue 2, 2022 · pp. 31–38 Read article