Search
22 articles for “stainless steel”
-
Growth of CNT in a Stainless Steel Surface by Using Gold Nanoparticle as a Catalyst for Corrosion Less Implants
Abstract: Now a day’s maximum implant are failure due to corrosion or infection. And the infection is happened due to growth of Escheria coli, steptococus, miccrobacterium tuberculosis like bacteria. Carbon nanotubes based stainless steel implant may be the promising outcome for corrosion. Carbon nano tubes when irradiate with NIR will heat up to 70oC and it has been demonstrate that folic acid adsorbed on carbon nano tubes allow specific binding to …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 2, Issue 2, 2016 · pp. 1–5 Read article
-
Characterization of Tensile Properties of Dissimilar Welded Joints of 316 Stainless Steel and HSLA Steel
Abstract: In this research, dissimilar weld joints of 316 stainless steel/HSLA steel were produced using ER316L-16 and E7018 filler metals by varying welding parameters such as current and arc voltage. Heat input and travel speed was computed. The joints were subjected to tensile test and tensile values were determined, computed, recorded and analysed. The heat inputs were compared with the tensile test results. According to the results obtained and analysis carried …
Published in International Journal of Manufacturing and Materials Processing · Vol. 6, Issue 2, 2020 · pp. 1–7 Read article
-
A Review on Steel Metallurgy
Abstract: Steel is mostly manufactured in the manufacturing industries and it is nearly ninety percent due to its extremely higher strength and high toughness. This review paper discusses on the classification of steels, steel as a potential engineering material, mechanical properties and fabrication properties of steels. It also explains on its applications, low alloy steels groups and its properties. This review article also discusses on special steels like micro alloyed steels, …
Published in International Journal of Manufacturing and Materials Processing · Vol. 10, Issue 1, 2024 · pp. 1–6 Read article
-
Experimental Investigation To Study the Effect of Heat Treatment on Mechanical Properties and Microstructure of Duplex Stainless Steel
Abstract: The broad aim of this paper is to study the enhancement in mechanical properties of duplex steel by thermomechanical processing. Solution annealing followed by water quenching, hot rolling to 10% and 30%, cryo-rolling to 80% and 90% and ageing at 600°C and 1000°C for 5 hrs were the treatments given. The cryo-rolled samples were used for impact testing and rest for tensile testing. Microstructural analysis was done after the various …
Published in International Journal of Mechanics and Design · Vol. 2, Issue 2, 2016 · pp. 32–42 Read article
-
Application of Artificial Neuron Network in roughness prediction: A case study in turning of stainless steel
Abstract: - Artificial neural networks offer a practical and efficient way to choose the best machining parameters for the turning process in order to reduce surface roughness, the resulting cutting forces, and maximize tool life. Surface roughness is a significant aspect in the evaluation of cutting performance and plays a significant role in the manufacturing process. The goal of this project is to create a model based on an Artificial Neural …
Published in International Journal of Computer Aided Manufacturing · Vol. 8, Issue 1, 2022 · pp. 21–26 Read article
-
Corrosion Inhibitors for Steel Appliances
Abstract: Inhibitors of corrosion in stainless steels are based on alloy developments. Effects of various alloy elements are to form passive film on surfaces under corrosive conditions. Tendency of passive film formation has rendered stainless steel to be applicable for any sector except bio-medical purposes. Line pipe of flow lines and gathering lines are suggested to use conventional carbon steel pipe with cost effective inhibitors. Duel phase stainless steels or improved …
Published in International Journal of Composite and Constituent Materials · Vol. 5, Issue 1, 2019 · pp. 1–7 Read article
-
Review on the Performance of Fibre and Industrial Slag in Concrete
Abstract: This review paper discusses about the different types of fibre used in concrete at different periods with the mix parameter details. This review enlightens the effect of industrial waste such as Bottom ash, Copper slag, Ferro-chromium slag, Ground granulated blast furnace slag (GGBFS), Steel slag, Stainless steel slag as a substitute in concrete. The elaborate study on its chemical composition and also the merits and demerits of using the slag …
Published in International Journal of Concrete Technology · Vol. 1, Issue 1, 2015 · pp. 16–30 Read article
-
Effect of Environmental Parameters on Metal Corrosion in Soil Using Finite Element Method
Abstract: Deterioration of buried metal due to corrosive soil environment is a major issue worldwide. Although failure of buried metal due to corrosive soil is an old problem, yet such failures are still uncontrollable even with the application of advanced corrosion protection technologies. Therefore, understanding environmental parameters causing corrosion of buried metals are necessary. This research work reviews environmental parameters causing corrosion of buried metal in soils. These functional parameters include: …
Published in International Journal of Chemical Engineering and Processing · Vol. 6, Issue 1, 2020 · pp. 1–13 Read article
-
Correlation between full width at half maximum (FWHM) of XRD peak with mechanical properties
Abstract: Full width at half maximum (FWHM) of XRD profiles characterizes different mechanical properties. However, there is no literature available that discusses about the correlation between the FWHM of XRD peaks with mechanical properties (ultimate tensile strength, yield strength, strain hardening coefficient and micro-hardness) upon plastic deformation. Martensitic stainless steel (type 410) and Ferritic stainless steel (type 430) samples were plastically deformed under different strain rate using tensile testing machine. Variation …
Published in International Journal of Metallurgy and Alloys · Vol. 1, Issue 1, 2015 · pp. 15–23 Read article
-
MODELLING OF SAW PARAMETERS AND ITS MECHANICAL PROPERTIES FOR JOINING STRUCTURAL STEELS
Abstract: Ethiopia nearly 85 per cent of people is morality depends on agriculture; the government of Ethiopia emphasis on Farm Mechanization for bringing the improvement in crop production using modern equipment and tools. However, the Modern equipment development needs improved machineries for fabrication. Moreover, the metal joining technology; like Submerged Arc Welding (SAW) available is very advance and made welding of thicker plats and welded structures. Therefore, while using this modern …
Published in International Journal of Polymer Science and Engineering · Vol. 4, Issue 2, 2018 · pp. 34–43 Read article
-
Performance Evaluation and Structural Integrity Assessment of Critical Components in a Glass Vacuum Lifter Using Static-Structural and Modal Analysis
Abstract: Glass handling operations in construction, manufacturing, and industrial sectors require reliable lifting systems to ensure safe transportation while minimizing the risk of damage and improving operator safety. Vacuum lifters have emerged as an effective solution for handling large and fragile glass panels by generating secure holding forces through suction pads. The structural integrity and dynamic performance of critical components, particularly the suction pad and lifter arm, play a vital role …
Published in International Journal of Mechanics and Design · Vol. 12, Issue 2, 2026 · pp. 1–17 Read article
-
Effect of Environmental Parameters on Corrosion of Metal Steel in Stagnant Fresh Water Using Finite Element Approach
Abstract: Corrosion as the determination or destruction of metal due to the reaction with it environment has posed a large amount of threat to industrial plants, human, increased cost of maintenance of plant and like cause injury to human due to accident in work place. This work studies the effect of environmental parameters of corrosion of three types of steel, Cast iron, mild steel and stainless steel in stagnant water media …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 6, Issue 1, 2020 · pp. 1–23 Read article
-
A Review on Layer Formation Studies in Selective Laser Melting of Steel Powders and Thin Wall Parts Using Pulse Shaping
Abstract: This paper advances the conclusions of the selective laser melting (SLM) of tool steel and stainless steel powders. The characteristic feature is the melting of single layers in deep powder beds by a continuous CO2 laser. First, effect of development parameters on the surface roughness for each material is examined. Based on these results combined with visual observation of the solidified tracks, the question is then discussed as how the …
Published in International Journal of Manufacturing and Materials Processing · Vol. 3, Issue 1, 2017 · pp. 9–15 Read article
-
Determination of the Flow Velocity Resistance in Non- Submerged Woody Plants
Abstract: Vegetation on the bank of a river or stream has a major influence on resistance, velocity distribution,and turbulence force. The resistance to flow in open channels depends on different channel and flow parameters. Out of many factors, vegetation is the mainly important parameter in open channels. In this study have been five points to measure the velocity in the channel. The experimental work has been done by a rectangular channel …
Published in International Journal of Environmental Chemistry · Vol. 8, Issue 1, 2022 · pp. 1–7 Read article
-
Monitoring of the Physicochemical Properties of Some Important Parameters That Induce Metal Corrosion in Water Medium
Abstract: This investigation addresses the effect of freshwater quality on metal corrosion in Choba river located in Obio/Akpo Local Government Area of Rivers State of Nigeria. The research involves the use of four different metal coupons namely Carbon Steel (CBS-D), Mild Steel (MS-B), Stainless Steel (SST-C), and Copper Steel (CPS-A). The different metal coupons were immersed in the freshwater medium and the freshwater medium is contaminated with industrial activities. The rate …
Published in International Journal of Metallurgy and Alloys · Vol. 10, Issue 2, 2024 · pp. 24–36 Read article
-
Modeling the Behavior of Metal Corrosion in Aquatic Environments at Varying Depth
Abstract: The failures of engineering structures situated in the aquatic environment caused by corrosion cannot be over-emphasized. This research work addressed the effects of depths, heavy metals, microbial activities, and physiochemical properties of the water body on the corrosion of submerged metal structures in the water body (the water body is assumed flowing). Model techniques were applied to evaluate the relationship between diffusion and weight loss, as well as velocity and …
Published in International Journal of Metallurgy and Alloys · Vol. 11, Issue 1, 2025 · pp. 1–9 Read article
-
Review On Bipolar Plate Geometric Design and Materials for Proton Exchange Membrane Fuel Cell Applications
Abstract: Abstract Bipolar plates (BPs) are vital components in proton exchange membrane fuel cells (PEMFCs), performing multiple essential functions that directly influence system efficiency, durability, and overall operational performance. They ensure uniform distribution of reactant gases across the active area, provide electrical conductivity between adjacent cells, assist in effective thermal management by dissipating heat generated during electrochemical reactions, and maintain proper sealing to prevent leakage of gases and coolant. Among these …
Published in International Journal of I.C. Engines and Gas Turbines · Vol. 11, Issue 2, 2025 · pp. 40–56 Read article
-
Fast pyrolysis of Kaner (Thevetia peruviana) Seed to Fuel and Chemicals
Abstract: Bio-energy is now considered as having the potential to provide the major part of the projected renewable energy provisions of the future. Currently non-edible seed biomass has been considered as one of the major bio energy resource. Among the different non-edible seeds such as Jatropha, Neem, Karanja, Safflower, Pomegranate, Cherry, Mahua, Cotton etc., Kaner (Thevetia Peruviana) seed plant is a very widely available even in the tropical climate. In this …
Published in International Journal of Analytical and Applied Chemistry · Vol. 1, Issue 1, 2015 · pp. 7–20 Read article
-
Development of Effective Electrodes and Electricity Generation in Continuous Microbial Fuel Cell using Poultry Wastewater
Abstract: The Microbial Fuel Cell was designed for batch and continuous operations and the electrodes were developed using a simple and effective technique known as phase inversion. The different combinations of electrodes were used in the experiment to get the maximum power output and organic matter removal. The poultry wastewater was used as substrate and was comparatively studied with Luria Bertani (LB) solution. The best combination of electrode was found to …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 4, Issue 1, 2018 · pp. 1–11 Read article
-
Basic Fundamentals of Different Solar Cells, Solar Energy Materials and Photovoltaic Performances
Abstract: Solar cell is one of the thrust areas of modern technology in the field of renewable energy. Crystalline semiconductor wafer based solar cells (SCs) (thicknesses almost 200–300 μm) mainly crystalline-Si or GaAs based solar cells are playing the legend role in last few decades. With technological revolution, thin film SCs (thickness range 1–2 μm), dye-sensitized or Graetzel, organic/polymer and plasmonic solar cell respectively are known as 2nd,3rd, 4th and 5th …
Published in International Journal of Energetic Materials · Vol. 1, Issue 1, 2015 · pp. 1–9 Read article